Toyota Tundra (2015 year). Manual — part 2644
NEXT
A
A
(a) Check the indicator
.
5.
CHECK FOR DTC*
(a) Check for DTCs
.
(b) Clear the DTCs
.
(c) Recheck for DTCs
.
Result
RESULT
PROCEED TO
DTC does not reoccur
A
DTC reoccurs
B
B
Go to step 8
6.
PROBLEM SYMPTOMS TABLE
Result
RESULT
PROCEED TO
Fault is not listed in problem symptoms table
A
Fault is listed in problem symptoms table
B
B
Go to step 8
7.
OVERALL ANALYSIS AND TROUBLESHOOTING*
.
(b) DATA LIST / ACTIVE TEST
.
CRUISE CONTROL: CRUISE CONTROL SYSTEM: HOW TO PRO...
NEXT
NEXT
8.
REPAIR OR REPLACE
9.
CONFIRMATION TEST
NEXT
END
CRUISE CONTROL: CRUISE CONTROL SYSTEM: HOW TO PRO...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000000ST00CIX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST; 2015 MY Tundra [08/2014 - ]
ROAD TEST
1. PROBLEM SYMPTOM CONFIRMATION
(a) Inspect the SET function.
(1) Turn the main switch ON.
(2) Check that the cruise control indicator light illuminates on the combination meter assembly.
(3) Drive at the required speed (between approximately 40 km/h (25 mph) and 200 km/h (125 mph)).
(4) Push the cruise control main switch to SET / COAST.
(5) Check that the cruise control SET indicator light illuminates at this time.
(6) After releasing the switch, check that the vehicle cruises at the set speed.
(b) Inspect the ACCELERATION function.
(1) Turn the main switch ON.
(2) Drive at the required speed (between approximately 40
km/h (25 mph) and 200 km/h (125 mph)).
(3) Push the cruise control main switch to SET / COAST.
(4) Check that vehicle speed increases while the cruise control
main switch is pushed to RES / ACC, and that the vehicle
cruises at the newly set speed when the switch is released.
(5) Momentarily push the cruise control main switch to RES /
ACC and then immediately release it. Check that vehicle
speed increases by approximately 1.6 km/h (1.0 mph)
(tap-up control).
CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST; 20...
(c) Inspect the COAST function.
(1) Turn the main switch ON.
(2) Drive at the required speed (between approximately 40
km/h (25 mph) and 200 km/h (125 mph)).
(3) Push the cruise control main switch to SET / COAST.
(4) Check that vehicle speed decreases while the cruise
control main switch is pushed to SET / COAST, and that the
vehicle cruises at the newly set speed when the switch is
released.
(5) Momentarily push the cruise control main switch to SET /
COAST, and then immediately release it. Check that
vehicle speed decreases by approximately 1.6 km/h (1.0
mph) (tap-down control).
(d) Inspect the CANCEL function.
(1) Turn the main switch ON.
(2) Drive at the required speed (between approximately 40
km/h (25 mph) and 200 km/h (125 mph)).
(3) Push the cruise control main switch to SET / COAST.
driving mode is reset.
Depressing the brake pedal.
Moving the shift lever from D to N.
With the shift lever on S, shifting to 1st, 2nd or
3rd gear.
Turning the main switch OFF.
Pulling the cruise control main switch to CANCEL.
Operating the VSC system.
(e) Inspect the RES (RESUME) function.
(1) Turn the main switch ON.
(2) Drive at the required speed (between approximately 40
km/h (25 mph) and 200 km/h (125 mph)).
(3) Push the cruise control main switch to SET / COAST.
OFF).
(5) After pushing the cruise control main switch to RES / ACC
CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст