Toyota Tundra (2015 year). Manual — part 1762
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000028S602AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL PUMP: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
3UR-FBE FUEL: FUEL PUMP: COMPONENTS; 2015 MY Tundra [08...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000000YLL061X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL PUMP: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE FUEL TANK ASSEMBLY
(a) Remove the fuel tank
.
2. REMOVE FUEL PRESSURE SWITCHING VALVE ASSEMBLY
3. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Set SST on the retainer.
SST: 09808-14030
HINT:
SST: 09808-14030
NOTICE:
(d) Remove the fuel suction with pump and gauge tube assembly from the fuel tank.
NOTICE:
4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
5. REMOVE FUEL SENDER GAUGE ASSEMBLY
3UR-FBE FUEL: FUEL PUMP: REMOVAL; 2015 MY Tundra [08/2014 ...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM0000028S5030X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL PUMP: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FUEL PUMP
table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
4 - 5
20°C (68°F)
0.2 to 3.0 Ω
If the result is not as specified, replace the fuel suction
with pump and gauge tube assembly.
connector, and the negative (-) lead to terminal 5. Check
that the fuel pump operates.
NOTICE:
These tests must be performed within 10 seconds to prevent
the coil from burning out.
Keep the fuel pump as far away from the battery as possible.
Always turn the voltage on and off on the battery side, not
the fuel pump side.
If the result is not as specified, replace the fuel suction
with pump and gauge tube assembly.
3UR-FBE FUEL: FUEL PUMP: INSPECTION; 2015 MY Tundra [08/2...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000000YLI064X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL PUMP: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
2. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
NOTICE:
tighten the retainer one complete turn by hand.
(e) Set SST on the retainer.
SST: 09808-14030
HINT:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст