Toyota Tundra (2015 year). Manual — part 639
(a) Install the oil cooler accessory assembly to the oil cooler tube,
and then pass the 2 hoses through the No. 1 flexible hose clamp
and close the clamp as shown in the illustration.
(b) Connect the 2 hoses to the No. 2 oil cooler tube.
NOTICE:
(a) Connect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet
hose to the oil cooler tube.
(b) Connect the 2 hoses to the transmission oil thermostat to install them.
NOTICE:
Torque:
18 N·m {184 kgf·cm, 13ft·lbf}
6. ADD AUTOMATIC TRANSMISSION FLUID
(a) Add automatic transmission fluid
.
AB60E AUTOMATIC TRANSMISSION: OIL COOLER (w/ Trailer To...
7. INSTALL FRONT BUMPER ASSEMBLY
(a) Install the front bumper
.
AB60E AUTOMATIC TRANSMISSION: OIL COOLER (w/ Trailer To...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000013F8069X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: OIL PUMP: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
AB60E AUTOMATIC TRANSMISSION: OIL PUMP: COMPONENTS...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000013F9069X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: OIL PUMP: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE FRONT OIL PUMP BODY O-RING
(a) Remove the O-ring from the oil pump.
2. FIX OIL PUMP ASSEMBLY
(a) Place the oil pump body on the torque converter.
3. REMOVE CLUTCH DRUM OIL SEAL RING
(a) Remove the 3 oil seal rings.
4. REMOVE STATOR SHAFT ASSEMBLY
(a) Remove the 17 bolts, and then remove the stator shaft from the
oil pump body.
AB60E AUTOMATIC TRANSMISSION: OIL PUMP: DISASSEMBLY...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст