Toyota Tundra (2015 year). Manual — part 2492
SEAT: FRONT SEAT ASSEMBLY (for Power Seat): COMPONENTS; 2...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002XDZ00MX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the
battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice
before proceeding with work
.
(a) Remove the front seat headrest assembly.
3. REMOVE INNER SEAT TRACK BRACKET COVER LH
(a) Operate the front power seat switch LH (slide switch) to move the seat to the foremost position.
(b) Detach the clip to remove the inner seat track bracket cover LH
in the direction indicated by the arrow shown in the illustration.
4. REMOVE OUTER SEAT TRACK BRACKET COVER LH
(a) Detach the clip to remove the outer seat track bracket cover LH
in the direction indicated by the arrow shown in the illustration.
5. REMOVE FRONT SEAT ASSEMBLY LH
SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL; 2015 ...
(a) Remove the 2 bolts.
(b) Operate the front power seat switch LH (slide switch) to move the seat to the rearmost position.
(c) Remove the 2 bolts.
(d) Operate the front power seat switch LH (slide switch) to move the seat to the center position and operate
the front power seat switch LH (reclining switch) to move the seatback to the upright position.
(e) w/ Vertical Adjuster:
Operate the front power seat switch LH (vertical switch) to move the seat to the highest position.
(f) w/ Leg Support Adjustment Switch:
Operate the seat variable cushion switch to move the seat to the foremost position.
(g) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the battery negative (-) terminal to disable the
SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
Text in Illustration
SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL; 2015 ...
*1
Front Seat Inner Belt Assembly LH
*2
Front Seat Wire LH
*3
Front Seat Airbag Assembly LH
(1) Place a finger on the slider, slide the slider to release the lock, and then disconnect the front seat side
airbag connector.
Text in Illustration
*1
Slider
-
-
(k) Remove the front seat assembly LH from the vehicle.
NOTICE:
Be careful not to damage the vehicle body.
SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL; 2015 ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст