Toyota Camry (2022 year). Manual in english — page 4
106
2. Instrument cluster
■ Vehicle settings
Item
Settings
Details
BSM (Blind Spot Monitor) (if equipped) (P. 330)
Outside rear view
Bright
Select to change the brightness
mirror
indicator
of the outside rear view mirror
brightness
Dim
indicators.
Early
Middle
Notification timing
Late
Select to change the notification
for presence of
timing for an approaching vehi-
approaching vehi-
cle.
cle (sensitivity)
Only when vehicle
detected in blind
spot
RCTA (Rear Cross Traffic Alert) (if equipped) (P. 345)
1 (Low)
RCTA buzzer vol-
Select to change the volume of
2 (Medium)
ume
the RCTA buzzer.
3 (Loud)
TPWS (Tire pressure warning system) (P. 474)
Select to initialize the tire pres-
sure warning system. To per-
form initialization, press and hold
Set pressure (tire pressure warning sys-
the
switch.
tem initialization)
Before performing initialization,
make sure to adjust the inflation
pressure of each tire to the spec-
ified level. (P. 475)
Select to change the tire pres-
sure warning system sensor ID
code set.
Change wheel (change the tire pres-
To enable this function, a second
sure warning system sensor ID code
set of tire pressure warning sys-
set)
tem sensor ID codes must be
(vehicles without a tire inflation pres-
registered by a Toyota dealer.
sure display function)
For information regarding chang-
ing the registered ID code set,
contact your Toyota dealer.
(P. 477)
2. Instrument cluster
107
Item
Settings
Details
Select to register the ID codes of
the tire pressure sensors to the
Change wheel (register tire pressure
tire pressure warning system.
warning system sensor ID codes)
To register the ID codes, press
(vehicles with a tire inflation pressure
display function)
and hold the
switch.
(P. 477)
On
Rear seat reminder
Select to enable/disable the rear
(P. 154)
seat reminder.
Off
2
Scheduled maintenance display (if equipped)
Select to reset the message indi-
cating maintenance is required,
Maintenance data reset
after the required maintenance is
performed. (P. 448)
■ Meter settings
Item
Settings
Details
Select to change the language
Language
displayed.
Select to change the units of
Units
measure displayed.
On
(Eco Driving
Select to enable/disable the Eco
Driving Indicator Light. (P. 109)
Indicator Light)
Off
Average vehicle
Select to change the display
Drive information
speed
between average speed/elapsed
(total [after reset])
time.
Elapsed time
Incoming calls
Select to enable/disable the pop-
Pop-up display
Brightness adjust-
up display.
ment
Select to reset the meter display
Default setting
settings to the default setting.
108
2. Instrument cluster
Odometer/trip meter
■ Odometer
Displays the total distance the vehicle has been driven.
■ Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the “ODO/
TRIP” switch.
Suggestion function
Displays suggestions to the driver in the following situations. To select
a response to a displayed suggestion, use the meter control switches.
The suggestion function can be turned on/off.
(Customizable features:P. 606)
■ Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the
engine switch has been turned off, if the headlight switch is in the
“AUTO” position, a suggestion message will be displayed asking if
you wish to turn the headlights off. To turn the headlights off, select
“Yes”.
If a front door is opened after the engine switch is turned off, this sug-
gestion message will not be displayed.
2. Instrument cluster
109
■Eco Driving Indicator
1
Eco Driving Indicator Light
During Eco-friendly acceleration
(Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Display
2
Suggests the Zone of Eco driving with
2
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
3
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
4
Eco Driving Indicator will not operate under the following conditions:
● The shift lever is in any position other than D.
● A paddle shift switch (if equipped) is operated.
● The vehicle speed is approximately 80 mph (130 km/h) or higher.
■ Suspension of the settings display
● Some settings cannot be changed while driving. When changing settings,
park the vehicle in a safe place.
● If a warning message is displayed, operation of the settings display will be
suspended.
■ Tire pressure (vehicles with a tire inflation pressure display function)
● It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to the “ON” position (vehicles without a smart key
system) or IGNITION ON mode (vehicles with a smart key system). It may
also take a few minutes to display the tire inflation pressure after inflation
pressure has been adjusted.
● “---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
● Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■ Customization
Some functions can be customized. (P. 103, 606)
110
2. Instrument cluster
WARNING
■ Caution for use while driving
● When operating the multi-information display while driving, pay extra
attention to the safety of the area around the vehicle.
● Do not look continuously at the multi-information display while driving as
you may fail to see pedestrians, objects on the road, etc. ahead of the
vehicle.
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
■Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■ While setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
2. Instrument cluster
111
Multi-information display (7-inch display)
Summary of functions
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
2
1
Indicators (P. 91)
2
Driving assist system status display area
Displays the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (if equipped)
(P. 290)
• Dynamic radar cruise control (if equipped) (P. 306)
• LTA (Lane Tracing Assist) (P. 270)
Speed limit display (vehicles with a navigation system)
3
(U.S.A. only) /RSA (Road Sign Assist) (if equipped) (P. 285)
4
Clock
For clock settings, refer to “NAVIGATION AND MULTIMEDIA SYSTEM
OWNER’S MANUAL”.
5
RSA (Road Sign Assist) (if equipped) (P. 285)
6
Speedometer
The speedometer display can be enabled/disabled in
on the multi-
information display. (P. 117)
112
2. Instrument cluster
7
Content display area
A variety of information can be displayed by selecting a menu icon. Addi-
tionally, warning or suggestion/advice pop-up displays will be displayed in
some situations.
• Menu icon content (P. 114)
• Suggestion function (P. 125)
• Warning message (P. 538)
8
Odometer/trip meter (P. 125)
9
Shift position (P. 217)
10
Outside temperature (P. 94)
11
Menu icons (P. 114)
12
“ODO/TRIP” switch (P. 113)
13
Meter control switches (P. 113)
2. Instrument cluster
113
Using the multi-information display
◆ Using the content display area
The content display area is operated using the meter control
switches.
Scroll screens*, change the
1
displayed content* and move
the cursor
2
Press: Enter/Set
2
Press and hold: Reset/Dis-
play the next screen
3
Return to the previous
screen
Pressing and holding the switch will display the first screen of the
selected menu icon.
Call sending/receiving and history display
4
Linked with the hands-free system, sending or receiving call is dis-
played. For details regarding the hands-free system, refer to “NAVIGA-
TION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
*: When the screen can be scrolled or different content can be displayed,
a mark, such as an arrow, will be displayed to suggest which switch to
operate.
◆ Using the odometer/trip meter
Items in this area are operated using the
“ODO/TRIP” switch.
Press: Change displayed item
Each time the switch is pressed,
the displayed item will be
changed.
Press and hold: Reset
Display the desired trip meter
and press and hold the switch
to
reset the trip meter.
114
2. Instrument cluster
Menu icons
Select a menu icon to display its content.
Warning message display (P. 538)
This menu icon will be displayed only when a warning message can be
displayed.
Select to display warning messages and measures to be taken if a mal-
function is detected.
Eco-friendly driving information (P. 115)
Select to display fuel consumption data in various forms.
Driving assist system information
Select to perform the following:
Display the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (if equipped)
(P. 290)
• Dynamic radar cruise control (if equipped) (P. 306)
• LTA (Lane Tracing Assist) (P. 270)
• RSA (Road Sign Assist) (if equipped) (P. 285)
Display the following navigation system-linked information (if equipped):
• Route guidance
• Compass display
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Vehicle information
Select to perform the following:
Display the following information:
• Tire inflation pressure (P. 474)
Enable/Disable the following systems:
• Intuitive parking assist (if equipped) (P. 336)
• BSM (Blind Spot Monitor) function (if equipped) (P. 330)
• RCTA (Rear Cross Traffic Alert) function (if equipped) (P. 345)
This function can also be enabled/disabled on
Settings display (P. 117)
Select to change the meter display settings and other settings.
2. Instrument cluster
115
Eco-friendly driving information (
)
■ Fuel consumption
Current fuel consumption
1
Displays the instantaneous cur-
rent fuel consumption.
2
Average fuel economy (after
start)
Displays the average fuel con-
sumption since engine start.*1
2
3
Driving range
Displays the driving range with remaining fuel.*2, 3
4
Gadget*4
The following items can be displayed by changing the settings for gad-
get content and fuel economy type on . (P. 117)
Displayable item
Content
Gadget
Fuel economy
content
type
Trip
Displays the average vehicle speed since
Average
(after start)
engine start.
vehicle
Total
Displays the average vehicle speed since the
speed
(after reset)
display was reset.*5
Trip
Displays the distance driven since vehicle
(after start)
start.
Distance
Total
Displays the distance driven since the display
(after reset)
was reset.*5
Trip
Displays the elapsed time since engine start.
(after start)
Elapsed
time
Displays the elapsed time since the display
Total
(after reset)
was reset.*5
116
2. Instrument cluster
5
Average fuel economy
Displayed item (listed below) can be changed on the fuel economy type
screen of . (P. 117)
● Total (after reset)
Displays the average fuel consumption since the display was reset.*1, 5
● Tank (after refuel)
Displays the average fuel consumption since the vehicle was refu-
eled.*1, 2
*1: Use the displayed fuel consumption as a reference only.
*2: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*3: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*4: The default setting is no display.
*5: This display can be reset by pressing and holding
while it is dis-
played.
■ Eco indicator
• Eco Driving Indicator
P. 126
• Driving range
Displays the driving range with remaining fuel.
When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
2. Instrument cluster
117
■ Speedometer display/Driving range
Speedometer display
1
Displays the vehicle speed.
2
Driving range
Displays the driving range with
remaining fuel.
When only a small amount of
fuel is added to the tank, the dis-
play may not be updated.
2
When refueling, turn the engine
switch off. If the vehicle is refu-
eled without turning the engine
switch off, the display may not
be updated.
This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
Settings display (
)
◆ Changing settings
Use the meter control switches on the steering wheel to change
settings.
1
Press
or
to select
2
Operate the switches to select a desired item.
3
Press or press and hold
The available settings will differ depending on if
is pressed or
pressed and held. Follow the instructions on the display.
118
2. Instrument cluster
◆ Setting items
■
LTA (Lane Tracing Assist) (P. 270)
Press and hold
to change the settings of the following items:
Item
Settings
Details
On
Select to enable/disable the lane
Lane center
centering function.
Off
High
Select to set the warning sensi-
Alert sensitivity
tivity.
Std.
On
Select to enable/disable the vehi-
Sway warning
cle sway warning.
Off
High
Select to set the vehicle sway
Sway sensitivity
Std.
warning sensitivity.
Low
■ PCS (Pre-Collision System) (P. 254)
Press and hold
to change the settings of the following items:
Item
Settings
Details
On
Select to enable/disable the pre-
PCS
collision system.
Off
Early
Select to change the warning
Warning sensitivity
Middle
timing.
Late
■ DRCC (Dynamic Radar Cruise Control) (P. 290, 306)
Press and hold
to change the settings of the following item:
Item
Settings
Details
Strong
Curve
speed
Select to change the vehicle
Weak
reduction
speed reduction strength.
Off
2. Instrument cluster
119
■ BSM (Blind Spot Monitor) (if equipped) (P. 330)
Press
to enable/disable the Blind Spot Monitor function.
Item
Settings
Details
On
Select to enable/disable the
BSM
Blind Spot Monitor function.
Off
Press and hold
to change the settings of the following item:
Item
Settings
Details
2
Outside rear view
Bright
Select to change the brightness
mirror
indicator
of the outside rear view mirror
brightness
Dim
indicators.
Early
Middle
Notification timing
Late
Select to change the notification
for presence of
timing for an approaching vehi-
approaching vehi-
cle.
cle (sensitivity)
Only when vehicle
detected in blind
spot
■ RCTA (Rear Cross Traffic Alert) (if equipped) (P. 345)
Press
to enable/disable the Rear Cross Traffic Alert function.
Item
Settings
Details
On
Select to enable/disable the Rear
RCTA
Cross Traffic Alert function.
Off
Press and hold
to change the settings of the following item:
Item
Settings
Details
1 (Low)
RCTA buzzer vol-
Select to change the volume of
2 (Medium)
ume
the RCTA buzzer.
3 (Loud)
120
2. Instrument cluster
■ RCD (Rear Camera Detection) function (if equipped) (P. 354)
Press
to enable/disable the rear camera detection function.
Item
Settings
Details
On
Select to enable/disable the rear
RCD
camera detection.
Off
■ PKSB (Parking Support Brake) (if equipped) (P. 360)
Press
to enable/disable the Parking Support Brake.
Item
Settings
Details
On
Select to enable/disable the
PKSB
Parking Support Brake system.
Off
■ Intuitive parking assist (if equipped) (P. 336)
Press
to enable/disable the Intuitive parking assist.
Item
Settings
Details
On
Intuitive
parking
Select to enable/disable the intui-
assist
tive parking assist.
Off
Press and hold
to change the settings of the following item:
Item
Settings
Details
1 (Low)
Select to change the volume of
Volume
2 (Medium)
the intuitive parking assist
buzzer.
3 (Loud)
2. Instrument cluster
121
■ HUD (Head-up display) (if equipped) (P. 128)
Press
to enable/disable the head-up display.
Item
Settings
Details
On
Select to enable/disable the
HUD
head-up display.
Off
Press and hold
to change the settings of the following items:
Item
Settings
Details
2
Select to adjust the brightness/
position of the head-up display.
• Press the
/
switch to
HUD Brightness/Position
adjust the display brightness.
• Press the
/
switch to
adjust the display position.
Select to change the display
between the following:
Tachometer set-
• Eco Driving Indicator
tings
• Tachometer
• No content
HUD Driving sup-
Navigation sys-
port
tem (if equipped)
Select to enable/disable head-up
Driving Assist
display content.
Compass
(if equipped)
Select to adjust the angle of the
head-up display.
Rotation
Press the
/
switch to
adjust the display angle.
122
2. Instrument cluster
■ RSA (Road Sign Assist) (if equipped) (P. 285)
Press and hold
to change the settings of the following items:
Item
Settings
Details
On
Select to enable/disable the
RSA
RSA.
Off
Select a notification method used
to warn the driver if the vehicle
speed exceeds the speed dis-
played on the speed limit sign on
Excess
speed
the multi-information display.
notification
Available methods:
• No notification
• Display only
• Display and buzzer
Notification method
Select a notification method used
to warn the driver if the system
detects the vehicle approaching
to the no-entry road when a do
not enter sign is displayed on the
Other notifications
multi-information display.
Available methods:
• No notification
• Display only
• Display and buzzer
5 mph (10 km/h)
Select a speed threshold over
which the excess speed notifica-
Excess speed noti-
3 mph (5 km/h)
tion will start to operate when a
fication level
speed limit sign is displayed on
the multi-information display.
1 mph (2 km/h)
2. Instrument cluster
123
■ Vehicle settings
Press and hold
to change the settings of the following items:
Item
Settings
Details
TPWS (Tire pressure warning system) (P. 474)
Select to initialize the tire pres-
sure warning system. To per-
form initialization, press and hold
Set pressure (tire pressure warning sys-
the
switch.
2
tem initialization)
Before performing initialization,
make sure to adjust the inflation
pressure of each tire to the spec-
ified level. (P. 475)
Select to change the tire pres-
sure warning system sensor ID
code set.
Change wheel (change the tire pres-
To enable this function, a second
sure warning system sensor ID code
set of tire pressure warning sys-
set)
tem sensor ID codes must be
(vehicles without a tire inflation pres-
registered by a Toyota dealer.
sure display function)
For information regarding chang-
ing the registered ID code set,
contact your Toyota dealer.
(P. 477)
Select to register the ID codes of
the tire pressure sensors to the
Change wheel (register tire pressure
tire pressure warning system. To
warning system sensor ID codes) (vehi-
register the ID codes, press and
cles with a tire inflation pressure display
function)
hold the
switch.
(P. 477)
On
Rear seat reminder
Select to enable/disable the rear
(P. 154)
seat reminder.
Off
Scheduled maintenance display (if equipped)
Select to reset the message indi-
cating maintenance is required,
Maintenance data reset
after the required maintenance is
performed. (P. 448)
124
2. Instrument cluster
■ Meter settings
Press and hold
to change the settings of the following items:
Item
Settings
Details
Select to change the language
Language
displayed.
Select to change the units of
Units
measure displayed.
On
(Eco Driving
Select to enable/disable the Eco
Driving Indicator Light. (P. 126)
Indicator Light)
Off
On
Select to enable/disable the
Speedometer
speedometer display.
Off
Off
No display
Average vehicle
speed
Gadget content
Select to turn the display of a
Distance
gadget.
Elapsed time
Trip (after start)*1
Select to change the average
Total (after reset)
Fuel economy type
fuel consumption display and an
Tank
item to be displayed as gadget.
(after refuel)*2
Select to turn the multi-informa-
tion display off.
To turn the multi-information dis-
Multi-information display off
play on again, press any direc-
tion switch (
/
/
/
).
Intersection guid-
ance (if equipped)
Select to enable/disable the pop-
Pop-up display
Incoming calls
up display.
Brightness adjust-
ment
Select to reset the meter display
Default setting
settings to the default setting.
*1: Selecting this item will only change the gadget.
*2: Selecting this item will turn the display of the gadget off.
2. Instrument cluster
125
Odometer/trip meter
■ Odometer
Displays the total distance the vehicle has been driven.
■ Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the “ODO/
2
TRIP” switch.
Suggestion function
Displays suggestions to the driver in the following situations. To select
a response to a displayed suggestion, use the meter control switches.
The suggestion function can be turned on/off.
(Customizable features:P. 606)
■ Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the
engine switch has been turned off, if the headlight switch is in the
“AUTO” position, a suggestion message will be displayed asking if
you wish to turn the headlights off. To turn the headlights off, select
“Yes”.
If a front door is opened after the engine switch is turned off, this sug-
gestion message will not be displayed.
126
2. Instrument cluster
■Eco Driving Indicator
1
Eco Driving Indicator Light
During Eco-friendly acceleration
(Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Display
2
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
3
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
4
Eco Driving Indicator will not operate under the following conditions:
● The shift lever is in any position other than D.
● A paddle shift switch (if equipped) is operated.
● Neither normal mode nor Eco drive mode is selected. (P. 375)
● The vehicle speed is approximately 80 mph (130 km/h) or higher.
■ Suspension of the settings display
● Some settings cannot be changed while driving. When changing settings,
park the vehicle in a safe place.
● If a warning message is displayed, operation of the settings display will be
suspended.
■ Tire pressure
● It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to IGNITION ON mode. It may also take a few min-
utes to display the tire inflation pressure after inflation pressure has been
adjusted.
● “---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
● Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■ Customization
Some functions can be customized. (P. 117, 606)
2. Instrument cluster
127
WARNING
■ Caution for use while driving
● When operating the multi-information display while driving, pay extra
attention to the safety of the area around the vehicle.
● Do not look continuously at the multi-information display while driving as
you may fail to see pedestrians, objects on the road, etc. ahead of the
vehicle.
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
2
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
■Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■ While setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
128
2. Instrument cluster
Head-up display
Summary of functions
The head-up display is linked to the meters and navigation system (if
equipped) and projects a variety of information in front of the driver,
such as the current vehicle speed.
1
Driving assist system status/navigation system-linked display area
(if equipped) (P. 130)
The following pop-up displays will be displayed in certain situations:
• Pre-collision warning (pre-collision system)
• Alert from the Parking Support Brake system (if equipped)
2
Shift position/speed limit/RSA (Road Sign Assist) display area
• Shift position (P. 217)
• Speed limit (vehicles with a navigation system) (U.S.A. only)
• RSA (Road Sign Assist) display (if equipped) (P. 285)
3
Vehicle speed display
4
Eco Driving Indicator/Tachometer (P. 131)
5
Information display area (P. 131)
The following pop-up displays will be displayed in certain situations:
• Warning/message
• Hands-free system status
• Audio system operation status
: If equipped
2. Instrument cluster
129
Using the head-up display
Select
on the multi-information display (P. 117) and then
◆ Enabling/disabling the head-up display
Press
to enable/disable the head-up display.
◆ Changing the head-up display settings
Press and hold
to change the following settings:
■ Eco Driving Indicator/Tachometer
2
Select to display Eco Driving Indicator/tachometer/no content.
■ Display brightness/position
Select to adjust the brightness and position of the head-up display.
■ Display content
Select to enable/disable the following items:
• Route guidance to destination (if equipped)
• Driving assist system status
• Compass (if equipped)
■ Display angle
Select to adjust the angle of the head-up display.
130
2. Instrument cluster
Driving assist system status/navigation system-linked display
area (if equipped)
◆ Driving assist system status display
Displays the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (P. 290)
• LTA (Lane Tracing Assist) (P. 270)
• RSA (Road Sign Assist) (if equipped) (P. 285)
• Intuitive parking assist (if equipped) (P. 336)
◆ Navigation system-linked display area (if equipped)
Displays the following items, which are linked to the navigation sys-
tem:
■ Street name
When the navigation system is performing route guidance, the
name of the next street will be displayed on the top of the display
area.
■ Route guidance to destination
Displayed when the navigation system is performing route guid-
ance. When approaching an intersection, an arrow will be displayed
to indicate the suggested direction of travel.
■ Compass
Displays the direction of travel.
2. Instrument cluster
131
Eco Driving Indicator/Tachometer
■ Eco Driving Indicator
1
Eco Driving Indicator Zone
Display
2
Eco driving ratio based on
acceleration
3
Zone of Eco driving
Displayed content is the same
2
as that displayed on the multi-
information display (Eco Driving
Indicator). For details, refer to
P. 126.
■ Tachometer
Displays the engine speed in revolutions per minute.
Information display area
Displays the following items in the appropriate situation:
■ Warning/Message
● Alert from the LTA (Lane Tracing Assist)
● Dynamic radar cruise control with full-speed range
● Brake Override System/Drive-Start Control
● message
Displayed when a suggestion/advice pop-up display is displayed on the
multi-information display. (P. 125)
● message
Displayed when a warning message is displayed on the multi-informa-
tion display. (P. 538)
● Outside temperature
Displayed in the following situations:
• When the engine switch is turned to IGNITION ON mode
• When the low outside temperature indicator is flashing
Displayed content is the same as that displayed on the multi-information
display. For details, refer to the explanation of the outside temperature
display on the multi-information display. (P. 94)
■ Hands-free system status
Displayed when the hands-free system is operated.
■ Audio system operation status
Displayed when the audio system is operated.
132
2. Instrument cluster
■ Head-up display
The head-up display may seem dark or hard to see when viewed through
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
■ Display brightness
The brightness of the head-up display can be adjusted on
of the multi-
information display. Also, it is automatically adjusted according to the ambient
brightness.
■ Enabling/disabling of the head-up display
If the head-up display is disabled, it will remain disabled when the engine
switch is turned off then back to IGNITION ON mode.
■ Street name display (vehicles with a navigation system)
Only street names which are included in the map data will be displayed.
WARNING
■Before using the head-up display
● Check that the position and brightness of the head-up display image does
not interfere with safe driving. Incorrect adjustment of the image’s position
or brightness may obstruct the driver’s view and lead to an accident,
resulting in death or serious injury.
● Do not continuously look at the head-up display while driving as you may
fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
■ Caution for changing settings of the head-up display
As the engine needs to be running while changing the settings of the head-
up display, ensure that the vehicle is parked in a place with adequate venti-
lation. In a closed area such as a garage, exhaust gases including harmful
carbon monoxide (CO) may collect and enter the vehicle. This may lead to
death or a serious health hazard.
2. Instrument cluster
133
NOTICE
■ To prevent damage to components
● Do not place any drinks near the head-
up display projector. If the projector gets
wet, electrical malfunctions may result.
● Do not place anything on or put stickers
onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
2
● Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
■ When changing the settings of the head-up display
To prevent battery discharge, ensure that the engine is running while the
changing the settings of the head-up display.
134
2. Instrument cluster
Fuel consumption information
Fuel consumption information can be displayed on the audio
system screen.
Trip information
Audio (vehicles without Data Communication Module) or Audio
Plus (vehicles without Data Communication Module)
1
Press the “MENU” button.
2
Select
“Info” on the
“Menu”
screen.
If the “History” screen is displayed,
select “Trip Information”.
2. Instrument cluster
135
Audio (vehicles with Data Communication Module), Audio Plus
(vehicles with Data Communication Module) and Premium Audio
1
Press the “MENU” button.
2
Select
“Info” on the
“Menu”
screen.
3
Select “ECO” on the “Informa-
tion” screen.
If the “History” screen is displayed,
select “Trip Information”.
2
1
Resetting the consumption data
2
Average vehicle speed since
the engine was started
3
Elapsed time since the engine
was started
4
Fuel consumption in the past 15
minutes
5
Cruising range (P. 137)
6
Current fuel consumption
Vehicles without a smart key system:
Average fuel consumption for the past 15 minutes is divided by color
into past averages and averages attained since the engine switch was
last turned to the “ON” position. Use the displayed average fuel con-
sumption as a reference.
Vehicles with a smart key system:
Average fuel consumption for the past 15 minutes is divided by color
into past averages and averages attained since the engine switch was
last turned to IGNITION ON mode. Use the displayed average fuel
consumption as a reference.
This image is an example only.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст