Toyota Auris Touring Sports (2017 year). Instruction — part 6

1-2. Theft deterrent system
85
1
86
1-2. Theft deterrent system
NOTICE
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
1-2. Theft deterrent system
87
Alarm
The alarm
The alarm uses light and sound to give an alert when an intrusion is
detected.
1
The alarm is triggered in the following situations when the alarm is
set:
● A locked door is unlocked or opened in any way other than using
the entry function (if equipped) or wireless remote control. (The
doors will lock again automatically.)
● The hood is opened.
Setting the alarm system
Close the doors and hood, and
lock all the doors using the entry
function (if equipped) or wireless
remote control. The system will be
set automatically after
30 sec-
onds.
The indicator light changes from
being on to flashing when the sys-
tem is set.
: If equipped
88
1-2. Theft deterrent system
Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
● Unlock the doors using the entry function (if equipped) or wireless
remote control.
● Start the engine. (The alarm will be deactivated or stopped after a
few seconds.)
System maintenance
The vehicle has a maintenance-free type alarm system.
Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of
the following:
Nobody is in the vehicle.
The windows are closed before the alarm is set.
No valuables or other personal items are left in the vehicle.
1-2. Theft deterrent system
89
Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
The doors are unlocked using the key.
1
A person inside the vehicle opens a door
or the hood.
The battery is recharged or replaced
when the vehicle is locked. (P. 601)
Alarm-operated door lock
In the following cases, depending on the situation, the door may automatically
lock to prevent improper entry into the vehicle:
When a person remaining in the vehicle unlocks the door and the alarm is
activated.
While the alarm is activated, a person remaining in the vehicle unlocks the
door.
When recharging or replacing the battery
NOTICE
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
90
1-2. Theft deterrent system
Double locking system (right-hand drive
vehicles only)
Unauthorized access to the vehicle is prevented by disabling the
door unlocking function from both the interior and exterior of
the vehicle.
Vehicles employing this system
have labels on the window glass
of both front doors.
Setting the double locking system
Turn the engine switch off, have all the passengers exit the vehicle
1
and ensure that all the doors are closed.
Using the entry function (if equipped):
2
Touch the sensor area on the outside door handle twice within 5
seconds.
Using the wireless remote control:
Press
twice within 5 seconds.
Canceling the double locking system
Using the entry function (if equipped): Hold the outside door handle.
Using the wireless remote control: Press
WARNING
Double locking system precaution
Never activate the double locking system when there are people in the vehi-
cle because all the doors cannot be opened from inside the vehicle.
91
Instrument cluster
2
2.
Instrument cluster
Warning lights and
indicators
92
Gauges and meters
98
Multi-information display
(3-ring meter)
101
Multi-information display
(2-ring meter)
107
Fuel consumption
information
118
92
2. Instrument cluster
Warning lights and indicators
The warning lights and indicators on the instrument cluster and
center panel inform the driver of the status of the vehicle’s vari-
ous systems.
For the purpose of explanation, the following illustration dis-
plays all warning lights and indicators illuminated.
3-ring meter
2-ring meter
The units used on the speedometer and some indicators may differ
depending on the target region.
2. Instrument cluster
93
Warning lights
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
*1
Brake system warning
Speed limiter indicator
light (P. 545)
(Yellow)
(P. 546)
(if equipped)
*1
*1
Charging system warn-
Slip indicator (P. 547)
2
ing light (P. 545)
(if equipped)
*1
*1, 2
Low engine oil pressure
PCS warning light
warning light (P. 545)
(P. 547)
(if equipped)
(if equipped)
*1
*1, 2
High engine coolant
Stop & Start cancel indi-
temperature
warning
cator (P. 547)
light (P. 545)
(if equipped)
(if equipped)
*1
*1
Malfunction
indicator
Fuel filter warning light
lamp (P. 546)
(P. 548)
(if equipped)
*1
*1
SRS warning light
Low engine oil level
(P. 546)
warning light (P. 548)
(if equipped)
*1
*1
Engine oil
change
ABS warning light
reminder light
(P. 546)
(P. 548)
(if equipped)
*1
*1
Electric power steering
DPF system warning
system warning light
light (P. 548)
(P. 546)
(if equipped)
Cruise control indicator
Open door warning light
(Yellow)
(P. 546)
(P. 549)
(if equipped)
(if equipped)
94
2. Instrument cluster
*3
*4
Rear passengers’ seat
Smart entry & start sys-
belt reminder lights
tem indicator (P. 213)
(P. 549)
(Green)
(if equipped)
*1
Smart entry & start sys-
Tire pressure warning
tem indicator (P. 549)
light (P. 550)
(Yellow)
(if equipped)
(if equipped)
*1
Low fuel level warning
Master warning light
light (P. 549)
(P. 550)
(if equipped)
Driver’s and front pas-
senger’s
seat
belt
reminder light (P. 549)
*1: These lights, except those shown on the multi-information display, turn on
when the engine switch is turned to the “ON” position (vehicles without a
smart entry & start system) or IGNITION ON mode (vehicles with a smart
entry & start system) to indicate that a system check is being performed.
They will turn off after the engine is started, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or turn off.
Have the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate a malfunction.
*3: The light flashes quickly to indicate that the steering lock has not been
released.
*4: This light illuminates on the center panel.
2. Instrument cluster
95
Indicators
The indicators inform the driver of the operating state of the vehicle’s
various systems.
LDA
(Lane Departure
Turn signal indicator
Alert) indicator
(P. 233)
(P. 271)
(if equipped)
Toyota parking
Tail light indicator
assist-sensor indicator
(P. 235)
(P. 308)
2
(if equipped)
(if equipped)
Headlight high beam
Simple-IPA indicator
indicator (P. 235)
(P. 315)
(if equipped)
*1
*1
Automatic High Beam
“TRC OFF” indicator
indicator (P. 276)
(P. 332)
(if equipped)
(if equipped)
*1, 2
Front fog light indicator
Slip indicator
(P. 241)
(P. 332)
(if equipped)
*1
Rear fog light indicator
VSC OFF indicator
(P. 241)
(P. 332)
*1
Cruise control indicator
PCS warning light
(P. 299)
(P. 258)
(Green)
(if equipped)
(if equipped)
*1
Cruise control “SET”
Stop & Start indicator
indicator (P. 299)
(P. 286)
(if equipped)
(if equipped)
*1
Speed limiter indicator
Stop & Start cancel indi-
(Green)
(P. 304)
cator (P. 286)
(if equipped)
(if equipped)
96
2. Instrument cluster
*1, 3
Gear Shift Indicator
Engine preheating indi-
(P. 231)
cator (P. 209, 213)
(if equipped)
(if equipped)
*4
Gear Shift Indicator
Smart entry & start sys-
(P. 231)
tem indicator (P. 213)
(Green)
(if equipped)
(if equipped)
*1, 5
*7
Eco Driving Indicator
Low outside tempera-
Light (P. 105, 115)
ture indicator (P. 98)
(if equipped)
(if equipped)
*6
*1, 6
Security indicator
“PASSENGER
AIR
(P. 75, 87)
BAG” indicator (P. 52)
“SPORT” indicator
(P. 224)
(if equipped)
*1: These lights, except those shown on the multi-information display, turn on
when the engine switch is turned to the “ON” position (vehicles without a
smart entry & start system) or IGNITION ON mode (vehicles with a smart
entry & start system) to indicate that a system check is being performed.
They will turn off after the engine is started, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or turn off.
Have the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: Vehicles with a 3-ring meter
*4: Vehicles with a 2-ring meter
*5: The light does not turn on when the system is disabled.
*6: This light illuminates on the center panel.
*7: When the outside temperature is approximately 3°C (37°F) or lower, the
indicator will flash for approximately 10 seconds, then stay on.
2. Instrument cluster
97
WARNING
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional
immediately if this occurs.
2
98
2. Instrument cluster
Gauges and meters
3-ring meter
2-ring meter
2. Instrument cluster
99
1
Tachometer
Displays the engine speed in revolutions per minute.
2
Speedometer
Displays the vehicle speed.
Outside temperature
3
Displays the outside temperature within the range of -40°C (-40°F) to 50°C
(122°F).
2-ring meter: Low outside temperature indicator comes on when the ambi-
ent temperature is 3°C (37°F) or lower.
2
4
Shift position and gear position indicator (if equipped)
P. 223
5
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Engine coolant temperature gauge
6
Displays the engine coolant temperature.
3-ring meter (vehicles with a Multidrive): When the average fuel economy
is displayed, the Eco Driving Indicator zone display (P. 105) will be dis-
played instead of the engine coolant temperature gauge.
Multi-information display
7
P. 101, 107
Display change switch
8
Changes the item displayed on the multi-information display.
The “DISP” switch on the steering wheel can also be used to change the
item displayed on the multi-information display.
100
2. Instrument cluster
The meters and display illuminate when
Vehicles without a smart entry & start system
The engine switch is in the “ON” position.
Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 15 km/h [9 mph])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
If “” is displayed continuously, the system may be malfunctioning. Take
your vehicle to any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
In the following situations, the engine may be overheating. In this case,
immediately stop the vehicle in a safe place, and check the engine after it
has cooled completely. (P. 603)
3-ring meter: The high engine coolant temperature warning light comes
on
2-ring meter: The engine coolant temperature gauge enters the red
zone
2. Instrument cluster
101
Multi-information display (3-ring meter)
Display content
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature.
● Engine coolant temperature
gauge (P. 98)
● Outside temperature (P. 98)
2
● Shift position and gear position
indicator (if equipped)
(P.
223)
● Trip information/Drive informa-
tion/Meter light control
(P.
102)
Displays the following items:
• Odometer
• Trip meter
• Stop & Start system operation time (if equipped)
• Stop & Start system total operation time (if equipped)
• Average fuel consumption
• Driving range
• Meter light control
● Display customization (P. 104)
• Eco Driving Indicator Light (if equipped)
• Stop & Start system operation time (if equipped)

Была ли эта страница вам полезна?
Да!Нет
9 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности