Toyota Camry (2019 year). Instruction — part 7
97
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
Select a menu icon to display its content.
Drive information (
Select to display various drive data.
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Driving assist system information
Select to display the operational status of the following systems:
• Cruise control (if equipped) (→P. 299)
• Dynamic radar cruise control (if equipped) (
• LDA (Lane Departure Alert with steering control) (if equipped)
(
Warning message display (
Select to display warning messages and measures to be taken if a mal-
function is detected.
Settings display (
Select to change the meter display settings and other settings.
Menu icons
98
2. Instrument cluster
CAMRY_U
■
Trip (after start)
Average fuel economy
*
Displays the average fuel con-
sumption since engine start.
Average vehicle speed
Displays the average vehicle
speed since engine start.
Elapsed time
Displays the time elapsed since
engine start.
*
: Use the displayed fuel consumption as a reference only.
■
Total (after reset)
Current fuel consumption
Displays the instantaneous cur-
rent fuel consumption.
Average fuel economy
*
1, 2
Displays the average fuel con-
sumption since the display was
reset.
Average
vehicle
speed/
Elapsed time
*
1
Displays the average vehicle speed since reset or elapsed time since
reset, as selected in
. (
*
1
: Pressing and holding
will reset the average fuel consumption and
average vehicle speed/elapsed time.
*
2
: Use the displayed fuel consumption as a reference only.
Drive information (
)
1
2
3
1
2
3
99
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
■
Tank (after refuel)
Driving range
*
1, 2
Displays the driving range with
remaining fuel.
Average fuel economy
*
1, 3
Displays the average fuel con-
sumption since the vehicle was
refueled.
*
1
: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*
2
: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*
3
: Use the displayed fuel consumption as a reference only.
■
Eco Driving Indicator
P. 105
■
Speedometer
Displays the vehicle speed.
■
Tire pressure (vehicles with a tire inflation pressure display
function)
P. 445
■
Blank (No items)
Displays no drive information contents.
1
2
100
2. Instrument cluster
CAMRY_U
◆
Changing settings
Use the meter control switches on the steering wheel to change
settings.
Press
or
to select
.
Operate the switches to select a desired item.
Change the setting by referring to the message displayed on the
screen.
◆
Setting items
■
LDA (Lane Departure Alert with steering control)
(if equipped) (
P. 261)
The following LDA system settings can be changed:
Settings display (
)
1
2
3
Item
Settings
Details
Steering assist
On
Select to enable/disable steering
wheel assistance.
Off
Alert sensitivity
High
Select to set the warning sensi-
tivity.
Normal
Sway warning
On
Select to enable/disable the vehi-
cle sway warning.
Off
Sway sensitivity
High
Select to set the vehicle sway
warning sensitivity.
Medium
Low
101
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
■
PCS (Pre-Collision System) (if equipped) (
The following pre-collision system settings can be changed:
■
BSM (Blind Spot Monitor) function (if equipped) (
P. 310)
■
RCTA (Rear Cross Traffic Alert) function (if equipped)
(
Item
Settings
Details
PCS
On
Select to enable/disable the pre-
collision system.
Off
Warning sensitivity
Select to change the warning
timing.
Item
Settings
Details
BSM
On
Select to enable/disable the
Blind Spot Monitor function.
Off
Item
Settings
Details
RCTA
On
Select to enable/disable the Rear
Cross Traffic Alert function.
Off
102
2. Instrument cluster
CAMRY_U
■
Vehicle settings
Item
Settings
Details
BSM (Blind Spot Monitor) (if equipped) (
Outside rear view
mirror
indicator
brightness
Bright
Select to change the brightness
of the outside rear view mirror
indicators.
Dim
RCTA (Rear Cross Traffic Alert) (if equipped) (
RCTA buzzer vol-
ume
1 (Low)
Select to change the volume of
the RCTA buzzer.
2 (Medium)
3 (Loud)
TPWS (Tire pressure warning system) (
Set pressure (tire pressure warning sys-
tem initialization)
Select to initialize the tire pres-
sure warning system. To per-
form initialization, press and hold
the
switch.
Before performing initialization,
make sure to adjust the inflation
pressure of each tire to the spec-
ified level. (
Change wheel (change the tire pres-
sure warning system sensor ID code
set)
(vehicles without a tire inflation pres-
sure display function)
Select to change the tire pres-
sure warning system sensor ID
code set.
To enable this function, a second
set of tire pressure warning sys-
tem sensor ID codes must be
registered by a Toyota dealer.
For information regarding chang-
ing the registered ID code set,
contact your Toyota dealer.
(
Change wheel (register tire pressure
warning system sensor ID codes)
(vehicles with a tire inflation pressure
display function)
Select to register the ID codes of
the tire pressure sensors to the
tire pressure warning system.
To register the ID codes, press
and hold the
switch.
(
103
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
■
Meter settings
Scheduled maintenance display (if equipped)
Maintenance data reset
Select to reset the message indi-
cating maintenance is required,
after the required maintenance is
performed. (
Item
Settings
Details
Item
Settings
Details
Language
Select to change the language
displayed.
Units
Select to change the units of
measure displayed.
(Eco Driving
Indicator Light)
On
Select to enable/disable the Eco
Driving Indicator Light. (
Off
Drive information
(total [after reset])
Average vehicle
speed
Select to change the display
between average speed/elapsed
time.
Elapsed time
Pop-up display
Incoming calls
Select to enable/disable the pop-
up display.
Brightness adjust-
ment
Default setting
Select to reset the meter display
settings to the default setting.
104
2. Instrument cluster
CAMRY_U
■
Odometer
Displays the total distance the vehicle has been driven.
■
Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the “ODO/
TRIP” switch.
Displays suggestions to the driver in the following situations. To select
a response to a displayed suggestion, use the meter control switches.
The suggestion function can be turned on/off.
(Customizable features:
■
Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the
engine switch has been turned off, if the headlight switch is in the
“AUTO” position, a suggestion message will be displayed asking if
you wish to turn the headlights off. To turn the headlights off, select
“Yes”.
If a front door is opened after the engine switch is turned off, this sug-
gestion message will not be displayed.
Odometer/trip meter
Suggestion function
105
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
■
Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
●
The shift lever is in any position other than D.
●
A paddle shift switch (if equipped) is operated.
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
■
Suspension of the settings display
●
Some settings cannot be changed while driving. When changing settings,
park the vehicle in a safe place.
●
If a warning message is displayed, operation of the settings display will be
suspended.
■
Tire pressure (vehicles with a tire inflation pressure display function)
●
It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to the “ON” position (vehicles without a smart key
system) or IGNITION ON mode (vehicles with a smart key system). It may
also take a few minutes to display the tire inflation pressure after inflation
pressure has been adjusted.
●
“---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■
Customization
Some functions can be customized. (
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
1
2
3
4
106
2. Instrument cluster
CAMRY_U
WARNING
■
Caution for use while driving
●
When operating the multi-information display while driving, pay extra
attention to the safety of the area around the vehicle.
●
Do not look continuously at the multi-information display while driving as
you may fail to see pedestrians, objects on the road, etc. ahead of the
vehicle.
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
■
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■
While setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
107
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
Indicators (
Dynamic radar cruise control with full-speed range/LDA (Lane
Departure Alert with steering control) display area
Displays the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (
• LDA (Lane Departure Alert with steering control) (
Speed limit display (vehicles with a navigation system)
(U.S.A. only)
Clock
For clock settings, refer to “NAVIGATION AND MULTIMEDIA SYSTEM
OWNER’S MANUAL”.
Speedometer
The speedometer display can be enabled/disabled in
on the multi-
information display. (
Multi-information display (7-inch display)
Summary of functions
1
2
3
4
5
108
2. Instrument cluster
CAMRY_U
Content display area
A variety of information can be displayed by selecting a menu icon. Addi-
tionally, warning or suggestion/advice pop-up displays will be displayed in
some situations.
• Menu icon content (
• Suggestion function (
• Warning message (
Odometer/trip meter (
Shift position (
P. 213)
Outside temperature (
Menu icons (
“ODO/TRIP” switch (
Meter control switches (
◆
Using the content display area
The content display area is operated using the meter control
switches.
Scroll screens
*
, change the
displayed content
*
and move
the cursor
Press: Enter/Set
Press and hold: Reset/Dis-
play the next screen
Return to the previous
screen
Pressing and holding the switch will display the first screen of the
selected menu icon.
*
: When the screen can be scrolled or different content can be displayed,
a mark, such as an arrow, will be displayed to suggest which switch to
operate.
Using the multi-information display
6
7
8
9
10
11
12
1
2
3
109
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
◆
Using the odometer/trip meter
Items in this area are operated using the “ODO/TRIP” switch.
Press: Change displayed item
Each time the switch is pressed,
the displayed item will be
changed.
Press and hold: Reset
Display the desired trip meter
and press and hold the switch to
reset the trip meter.
Select a menu icon to display its content.
Warning message display (
This menu icon will be displayed only when a warning message can be
displayed.
Select to display warning messages and measures to be taken if a mal-
function is detected.
Eco-friendly driving information (
Select to display fuel consumption data in various forms.
Driving assist system information
Select to perform the following:
Display the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (
• LDA (Lane Departure Alert with steering control) (
Display the following navigation system-linked information (if equipped):
• Route guidance
• Compass display (heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Menu icons
110
2. Instrument cluster
CAMRY_U
Vehicle information
Select to perform the following:
Display the following information:
• Tire inflation pressure (
Enable/Disable the following systems:
• Intuitive parking assist (if equipped) (
• BSM (Blind Spot Monitor) function (if equipped) (
• RCTA (Rear Cross Traffic Alert) function (if equipped) (
This function can also be enabled/disabled on
.
Settings display (
Select to change the meter display settings and other settings.
■
Fuel consumption
Current fuel consumption
Displays the instantaneous cur-
rent fuel consumption.
Average fuel economy (after
start)
Displays the average fuel con-
sumption since engine start.
*
1
Driving range
Displays the driving range with remaining fuel.
*
2, 3
Gadget
*
4
The following items can be displayed by changing the settings for gad-
get content and fuel economy type on
. (
Eco-friendly driving information (
)
1
2
3
4
111
2. Instrument cluster
2
Instru
me
nt clu
ster
CAMRY_U
Average fuel economy
Displayed item (listed below) can be changed on the fuel economy type
screen of
. (
● Total (after reset)
Displays the average fuel consumption since the display was reset.
*
1, 5
● Tank (after refuel)
Displays the average fuel consumption since the vehicle was refu-
eled.
*
1, 2
*
1
: Use the displayed fuel consumption as a reference only.
*
2
: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*
3
: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*
4
: The default setting is no display.
*
5
: This display can be reset by pressing and holding
while it is dis-
played.
Displayable item
Content
Gadget
content
Fuel economy
type
Average
vehicle
speed
Trip
(after start)
Displays the average vehicle speed since
engine start.
Total
(after reset)
Displays the average vehicle speed since the
display was reset.
*
5
Distance
Trip
(after start)
Displays the distance driven since vehicle
start.
Total
(after reset)
Displays the distance driven since the display
was reset.
*
5
Elapsed
time
Trip
(after start)
Displays the elapsed time since engine start.
Total
(after reset)
Displays the elapsed time since the display
was reset.
*
5
5
112
2. Instrument cluster
CAMRY_U
■
Eco indicator
• Eco Driving Indicator
• Driving range
Displays the driving range with remaining fuel.
When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
◆
Changing settings
Use the meter control switches on the steering wheel to change
settings.
Press
or
to select
.
Operate the switches to select a desired item.
Press or press and hold
.
The available settings will differ depending on if
is pressed or
pressed and held. Follow the instructions on the display.
◆
Setting items
■
LDA (Lane Departure Alert with steering control) (
Press and hold
to change the settings of the following items:
Settings display (
)
1
2
3
Item
Settings
Details
Steering assist
On
Select to enable/disable steering
wheel assistance.
Off
Alert sensitivity
High
Select to set the warning sensi-
tivity.
Normal
Sway warning
On
Select to enable/disable the vehi-
cle sway warning.
Off
Sway sensitivity
High
Select to set the vehicle sway
warning sensitivity.
Medium
Low
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст