Toyota Proace City Verso EV (2022 year). Manual in english — page 16
300
Select the "All", "Incoming" or "Sent” tab.
Select the message chosen in one of the
Settings
lists.
Select the details of the message chosen
Press "Transfer" to select one or more
Audio settings
in one of the lists.
recipients.
Press "Answer" to send a quick message
Press " Play" to start playing the
Press Settings to display the main page.
stored in the system.
message.
Press "Call" to start the call.
Select "Audio settings".
Managing email
Press " Play" to listen to the message.
Press Telephone to display the main
Then select "Ambience", "Position"; "Sound",
"Voice" or "Ringtone".
page.
Press "OK" to save the settings.
Press the "OPTIONS" button to access the
WARNING
secondary page.
Select "Email" to display the list of
Access to "Messages" depends on the
NOTICE
messages.
compatibility between the smartphone and the
Select the "Incoming", "Sent" or "Not
onboard system.
The balance/distribution (or spatialisation with
read” tab.
Some smartphones retrieve messages or
Select the message chosen in one of the lists.
email messages more slowly than others.
to adjust the sound quality according to the
Press " Play" to start playing the
number of passengers in the vehicle.
message.
Available only with the front and rear speaker
Managing quick messages
configuration.
WARNING
Press Telephone to display the main
page.
Access to email messages depends on the
NOTICE
Press the "OPTIONS" button to access the
compatibility between the smartphone and the
secondary page.
onboard system.
The Ambience setting (choice of 6
Select "Quick messages" to display the
ambiences) and the Bass, Medium and
list of messages.
Treble sound settings are different and
Select the "Delayed", "My arrival", "Not
independent for each audio source.
available" or "Other" tab, enabling you to
Activate or deactivate "Loudness".
create new messages.
Press "Create" to write a new message.
301
The "Position” settings (All passengers,
Press "OK" to accept the transfer of the
Modifying system settings
Driver and Front only) are common to all
photograph.
Press Settings to display the main page.
sources.
Press "OK" again to save the settings.
Activate or deactivate "Touch tones",
Press the "OPTIONS" button to access the
"Volume linked to speed" and "Auxiliary
secondary page.
input".
NOTICE
Select "Screen configuration".
12
The location for the photograph is square; the
NOTICE
Select "Animation".
system reshapes the original photograph if in
Activate or deactivate:Automatic
another format.
scrolling
optimises the sound distribution inside the
Press this button to reset the selected
Select "Brightness".
passenger compartment.
profile.
Move the slider to adjust the brightness of
the screen and/or the instrument panel.
WARNING
Press Settings to display the main page.
Configuring profiles
Press Settings to display the main page.
Resetting the selected profile activates the
Press the "OPTIONS" button to access the
English language by default.
secondary page.
Press the "OPTIONS" button to access the
Select "System settings".
Select a "Profile" (1 or 2 or 3) to link "Audio
secondary page.
settings" with it.
Select "Setting of the profiles".
Select "Units" to change the units of distance,
Select "Audio settings".
fuel consumption and temperature.
Select "Profile 1", "Profile 2", "Profile 3” or
Select "Factory settings" to restore the initial
Then select "Ambience", "Position"; "Sound",
"Common profile".
settings.
"Voice" or "Ringtone".
Press this button to enter a name for the
Press "OK" to save the selected profile’s
profile using the virtual keypad.
WARNING
settings.
Press "OK" to confirm.
Resetting the system to "Factory settings"
Press this button to add a photograph to
activates English and degrees Fahrenheit and
the profile.
deactivates summer time.
Insert a USB memory stick containing the
Select "System info" to display the versions of
photograph in the USB port.
the various modules installed in the system.
Select the photograph.
302
Selecting the language
Setting the time
Colour schemes
Press Settings to display the main page.
Press Settings to display the main page.
Depending on equipment/Depending on version.
Press the "OPTIONS" button to access the
Press the "OPTIONS" button to access the
WARNING
secondary page.
secondary page.
Select "Languages" to change the
Select "Setting the time-date".
As a safety measure, the procedure for
language.
changing the colour scheme is only possible
Select "Time".
when the vehicle is stationary.
Setting the date
Press this button to set the time using the
Press Settings to display the main page.
Press Settings to display the main page.
virtual keypad.
Press "OK" to confirm.
Select "Color schemes".
Press the "OPTIONS" button to access the
secondary page.
Press this button to set the time zone.
Select a colour scheme in the list then
Select "Setting the time-date".
press "OK" to confirm.
Select the display format for the time
Select "Date".
(12h/24h).
NOTICE
Press this button to set the date.
Activate or deactivate summer time (+1
hour).
Whenever the colour scheme is changed, the
Press "OK" to confirm.
Activate or deactivate GPS
system restarts, temporarily displaying a
synchronisation (UTC).
black screen.
Select the display format for the date.
Press "OK" to confirm.
NOTICE
NOTICE
Time and date setting is only available if
The system may not automatically manage
"GPS synchronisation" is deactivated.
the change between winter and summer time
(depending on the country of sale).
303
The "Danger zone" audible warning feature is
In certain countries, only major routes
Frequently asked
not working.
(motorways, etc.) are listed for the traffic
questions
The audible warning is not active or the volume
information.
The following information groups together the
is too low.
This is perfectly normal. The system is
answers to the most frequently asked questions
► Activate the audible warning in the
dependent on the traffic information available.
concerning the system.
"Navigation" menu and check the voice volume
The altitude is not displayed.
in the sound settings.
On starting, GPS initialisation may take up to
12
Navigation
The system does not suggest a detour
3 minutes to receive more than 4 satellites
around an incident on the route.
correctly.
I cannot enter the navigation address.
The route settings do not take account of TMC
► Wait until the system has started up
The address is not recognised.
messages.
completely so that there is GPS coverage by at
► Use the "intuitive method" by pressing
► Configure the "Traffic info " function in
least 4 satellites.
the "Search…" button at the bottom of the
the route settings list (Without, Manual or
Depending on the geographical environment
"Navigation” page.
Automatic).
(tunnel, etc.) or the weather, the conditions of
The route calculation is not successful.
I receive a warning about a "Danger area"
reception of the GPS signal may vary.
The route settings may conflict with the current
that is not on my route.
This behaviour is normal. The system is
location (for example, if toll roads are excluded
As well as providing guided navigation, the
dependent on the GPS signal reception
but the vehicle is on a toll road).
system announces all "Danger areas" positioned
conditions.
► Check the route settings in the "Navigation"
in a cone located in front of the vehicle. It may
My navigation is no longer connected.
menu.
provide an alert for "Danger areas" located on
During start-up and in certain geographical
I do not receive "Danger zone” alerts.
nearby or parallel roads.
areas, the connection may be unavailable.
You have not subscribed to the online services
► Zoom the map to show the exact location
► Check that the online services are activated
option.
of the "Danger area". You can select "On the
(settings, contract).
► If you have subscribed to the option:
route" to stop receiving warnings or decrease the
- a few days may elapse before the service is
warning duration.
activated,
Certain traffic jams along the route are not
- services may not be selected in the system
indicated in real time.
menu,
On starting, a few minutes may elapse before
- online services are not active ("TOMTOM
the system begins to receive traffic information.
TRAFFIC" not shown on the map).
► Wait until traffic information is being received
The POIs do not appear.
correctly (traffic information icons shown on the
The POIs have not been selected.
map).
► Set the zoom level to 600 ft (200 m) or select
POIs in the POI list.
304
Radio
► Press the "Update list" button in the "Radio
The Bluetooth profile does not allow the transfer
stations” secondary menu.
of this information.
The reception quality of the tuned radio
station gradually deteriorates or the station
Media
Telephone
presets are not working (no sound, 87.5 MHz
Playback of my USB memory stick starts only
I cannot connect my Bluetooth telephone.
is displayed, etc.).
after a very long wait (around 2 to 3 minutes).
The telephone's Bluetooth function may be
The vehicle is too far from the selected station’s
Some files supplied with the memory stick may
switched off or the device may not be visible.
transmitter, or no transmitter is present in the
greatly slow down access to reading the memory
► Check that the telephone has Bluetooth
geographical area.
stick (multiplication by 10 of the cataloguing
switched on.
► Activate the "RDS" function by means of the
time).
► Check in the telephone settings that it is
short-cut menu to enable the system to check
► Delete the files supplied with the memory
"visible to all".
whether there is a more powerful transmitter in
stick and limit the number of sub-folders in the
► Deactivate then reactivate the telephone’s
the geographical area.
file structure on the memory stick.
Bluetooth function.
The aerial is missing or has been damaged
There may be an extended pause after
The Bluetooth telephone is not compatible with
(for example while entering a car wash or
inserting a USB stick.
the system.
underground car park).
The system reads a variety of data (folder, title,
► You can check the compatibility of the
► Have the aerial checked by a dealer.
artist, etc.). This can take from a few seconds to
telephone on the Brand's website (services).
The environment (hills, buildings, tunnels,
a few minutes.
Android Auto and/or CarPlay do not work.
basement car parks, etc.) is blocking reception,
This is perfectly normal.
Android Auto and CarPlay may not activate if the
including in RDS mode.
Some characters in information about the
USB cables are of poor quality.
This is a perfectly normal phenomenon, and is
currently playing media may not be displayed
► Use genuine USB cables to ensure
not indicative of an audio system malfunction.
correctly.
compatibility.
I cannot find some radio stations in the list of
The audio system is unable to process certain
Android Auto and/or CarPlay do not work.
stations received.
types of character.
Android Auto and CarPlay are not available in all
The name of the radio station changes.
► Use standard characters to name tracks and
countries.
The station is no longer received or its name has
folders.
► Check the Google Android Auto or Apple
changed in the list.
Playback of streaming files does not start.
website to see which countries are supported.
Some radio stations send other information
The connected device does not automatically
The volume of the telephone connected in
in place of their name (the title of the song for
launch playback.
Bluetooth mode is inaudible.
example).
► Start playback from the device.
The volume depends on both the system and the
The system interprets these details as the station
Track names and playing times are not
telephone.
name.
displayed on the audio streaming screen.
305
► Increase the volume of the audio system, to
► Modify the treble and bass or ambience
The switch-off is normal: the system
maximum if required, and increase the volume of
settings to obtain the desired musical ambience.
automatically goes into energy economy mode
the telephone if necessary.
When the balance settings are changed, the
and switches off to maintain an adequate charge
Ambient noise affects the quality of the
distribution is deselected.
in the battery.
telephone call.
When the distribution setting is changed, the
► Start the vehicle’s engine to increase the
► Reduce the ambient noise level (close
balance settings are deselected.
charge of the battery.
windows, turn down ventilation, slow down, etc.).
Selecting a distribution setting imposes the
The date and time cannot be set.
12
Some contacts are duplicated in the list.
balance settings, and vice versa.
Setting of the date and time is only available
The options for synchronising contacts are:
► Modify the balance setting or the distribution
if the synchronisation with the satellites is
synchronise the contacts on the SIM card, the
setting to obtain the desired sound quality.
deactivated.
contacts on the telephone, or both. When both
There is a difference in sound quality
► Settings menu / Options / Time-Date setting.
synchronisations are selected, some contacts
between audio sources.
Select the "Time" tab and deactivate the "GPS
may be duplicated.
To allow for optimal listening quality, the sound
synchronisation" (UTC).
► Select "Display SIM card contacts" or
settings can be tailored to different audio
"Display telephone contacts".
sources, which can generate audible differences
The contacts are not listed in alphabetical
when changing source.
order.
► Check that the sound settings are appropriate
Some telephones offer display options.
to the sources listened to. We recommend
Depending on the settings chosen, contacts can
setting the sound functions (Bass:, Treble:,
be transferred in a specific order.
Balance) to the middle position, setting the
► Modify the telephone directory display
musical ambience to "None", setting loudness
settings.
correction to "Active" in USB mode and "Inactive"
The system does not receive SMS.
in Radio mode.
Bluetooth mode does not allow SMS text
► In all cases, after applying sound settings,
messages to be sent to the system.
adjust the volume level on the portable device (to
a high level) first. Then adjust the volume level
Settings
on the audio system.
When the treble and bass settings are
When the engine is off, the system switches
changed, the ambience is deselected.
off after several minutes of use.
When the ambience is changed, the treble
When the engine is switched off, the system's
and bass settings are reset.
operating time depends on the state of charge of
Selecting an ambience imposes the treble and
the battery.
bass settings, and vice versa.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст