Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 439
SEAT BELT – SEAT BELT WARNING SYSTEM
SB–23
SB
DATA LIST / ACTIVE TEST
1.
READ DATA LIST
HINT:
By accessing the DATA LIST using the intelligent tester,
values of the switches and sensors can be read without
removing any parts. Reading the DATA LIST is the first
step of troubleshooting and is one method of shortening
labor time.
(a) Connect the intelligent tester with the CAN VIM to
the DLC3.
(b) Turn the ignition switch ON and turn the tester ON.
(c) Enter the DATA LIST by following the prompts
displayed on the tester screen.
Center Airbag Sensor Assembly
Occupant Classification ECU
Item
Measurement Item/
Range (Display)
Normal Condition
Diagnostic Note
D BUCKLE SW
Buckle switch (Driver side)/
UNSET: Seat belt not fastened
SET: Seat belt fastened
NG: Data not determined
UNSET/SET
-
P BUCKLE SW
Buckle switch (Front passenger
side)/
UNSET: Seat belt not fastened
SET: Seat belt fastened
NG: Data not determined
UNSET/SET
-
PASSENGER CLASS
Front passenger classification/
NG: Data is not determined
OFF: Vacant
CHILD: Child (Less than 36 kg
[79.37 lb]) seated
AF05: Adult (36 to 54 kg [79.37 to
119.05 lb]) seated
AM50: Adult (More than 54 kg
[119.05 lb]) seated
FAIL: Failure detected
NG/OFF/CHILD/AF05/AM50/
FAIL
-
Item
Measurement Item/
Range (Display)
Normal Condition
Diagnostic Note
P BUCKLE SW
Buckle switch (Front passenger
side)/
UNSET: Front passenger side
seat belt is unfastened
SET: Front passenger side seat
belt is fastened
NG: Front passenger side seat
belt is malfunctioning
UNSET/SET
-
PASSENGER CLASS
Front passenger classification/
AM50: Adult (more than 54 kg
(119.05 lb)) is seated
AF05: Adult (36 to 54 kg (79.37 to
119.05 lb)) is seated
CHILD: Child (less than 36 kg
(79.37 lb)) is seated
CRS: Child restraint system (less
than 7 kg (15.43 lb)) and front
passenger side buckle switch ON,
then 7 to 36 kg (15.43 to 79.37 lb)
is set
OFF: Vacant
AF05/AM50/CHILD/CRS/OFF
-
SB–24
SEAT BELT – SEAT BELT WARNING SYSTEM
SB
Main Body ECU (Driver Side J/B)
Item
Measurement Item/
Range (Display)
Normal Condition
Diagnostic Note
D SEAT BUCKL SW
Buckle switch (Driver side)/
ON: Seat belt fastened
OFF: Seat belt not fastened
ON/OFF
-
SEAT BELT – SEAT BELT WARNING SYSTEM
SB–25
SB
DESCRIPTION
When the ignition switch is ON, the combination meter assembly receives signals from the front seat inner
belt assembly (driver side). When the seat belt is unfastened, the combination meter assembly flashes the
driver seat belt warning light in the combination meter assembly. When the seat belt is fastened, the
combination meter assembly stops flashing the front driver seat belt warning light.
WIRING DIAGRAM
INSPECTION PROCEDURE
(a) Connect the intelligent tester with the CAN VIM to the
DLC3.
(b) Turn the ignition switch ON and turn the tester ON.
(c) Enter the following menus: OBD/MOBD / BODY / DATA
LIST
Main Body ECU (Driver Side J/B)
OK:
Front seat inner belt assembly (driver side)
operates normally.
NG
Driver Side Seat Belt Warning Light does not Operate
1
READ VALUE OF INTELLIGENT TESTER (D SEAT BUCKL SW)
Main Body ECU
(Driver Side J/B)
DBKL
L
Combination Meter Assembly
Front Seat Inner Belt Assembly (Driver Side)
RDC
+
E
To Front Seat Outer Belt (Driver Side)
B137675E01
Item
Measurement Item/ Range
(Display)
Normal Condition
Diagnostic Note
D SEAT BUCKL SW
Buckle switch (Driver side)/
ON: Seat belt fastened
OFF: Seat belt not fastened
ON/OFF
-
Go to step 3
SB–26
SEAT BELT – SEAT BELT WARNING SYSTEM
SB
OK
(a) Disconnect the E13 combination meter assembly
connector.
(b) Disconnect the L19 front seat inner belt assembly (driver
side) connector.
(c) Measure the resistance.
Standard resistance
(d) Reconnect the combination meter assembly connector.
(e) Reconnect the front seat inner belt assembly (driver
side) connector.
NG
OK
(a) Disconnect the L19 front seat inner belt assembly (driver
side) connector.
(b) Measure the resistance.
Standard resistance
(c) Reconnect the front seat inner belt assembly (driver
side) connector.
NG
2
CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT SEAT
INNER BELT ASSEMBLY)
Wire Haeness Side:
Front Seat Inner Belt Assembly
(Driver Side) Connector
Combination Meter Assembly Connector
Front View
Front View
E13
L19
+
L
B137678E01
Tester Connection
Specified Condition
E13-8 (L) - L19-3 (+)
Below 1
Ω
E13-8 (L) or L19-3 (+) - Body ground
10 k
Ω or higher
REPAIR OR REPLACE HARNESS OR
CONNECTOR
REPLACE COMBINATION METER ASSEMBLY
3
INSPECT FRONT SEAT INNER BELT ASSEMBLY (DRIVER SIDE)
Component Side:
Front Seat Inner Belt Assembly
(Driver Side) Connector
+
E
RDC
B137709E02
Tester Connection
Condition
Specified Condition
+ - E
Tongue plate fastened
10 k
Ω or higher
RDC - E
Tongue plate
unfastened
Below 1
Ω
+ - E
Tongue plate
unfastened
Below 1
Ω
RDC - E
Tongue plate fastened
10 k
Ω or higher
REPLACE FRONT SEAT INNER BELT
ASSEMBLY (DRIVER SIDE)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст