Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 214
EXTERIOR – SIDE STEP
ET–85
ET
BODY
EXTERIOR
SIDE STEP
COMPONENTS
N*m (kgf*cm, ft*lbf) : Specified torque
12.5 (125, 9)
NO. 1 SIDE STEP
BRACKET
NO. 2 SIDE STEP
BRACKET
NO. 3 SIDE STEP
BRACKET
SIDE STEP
SUB-ASSEMBLY
x2
x2
x2
x2
x2
x2
20 (200, 14)
20 (200, 14)
12.5 (125, 9)
20 (200, 14)
12.5 (125, 9)
B135175E01
ET–86
EXTERIOR – SIDE STEP
ET
REMOVAL
HINT:
The procedure described below is for the LH side. Use the
same procedure for both the RH and LH sides, unless
otherwise specified.
1.
REMOVE SIDE STEP SUB-ASSEMBLY
(a) Remove the 6 bolts and the side step.
2.
REMOVE NO. 1 SIDE STEP BRACKET
(a) Remove the 2 bolts and the No. 1 side step bracket.
3.
REMOVE NO. 2 SIDE STEP BRACKET
(a) Remove the 2 bolts and the No. 2 side step bracket.
4.
REMOVE NO. 3 SIDE STEP BRACKET
(a) Remove the 2 bolts and the No. 3 side step bracket.
B135176
B135177
B135178
B135179
EXTERIOR – SIDE STEP
ET–87
ET
INSTALLATION
HINT:
The procedure described below is for the LH side. Use the
same procedure for both the RH and LH sides, unless
otherwise specified.
1.
INSTALL NO. 3 SIDE STEP BRACKET
(a) Install the No. 3 side step bracket with the 2 bolts.
Torque: 12.5 N*m (125 kgf*cm, 9 ft.*lbf)
2.
INSTALL NO. 2 SIDE STEP BRACKET
(a) Install the No. 2 side step bracket with the 2 bolts.
Torque: 12.5 N*m (125 kgf*cm, 9 ft.*lbf)
3.
INSTALL NO. 1 SIDE STEP BRACKET
(a) Install the No. 1 side step bracket with the 2 bolts.
Torque: 12.5 N*m (125 kgf*cm, 9 ft.*lbf)
4.
INSTALL SIDE STEP SUB-ASSEMBLY
(a) Install the step with 6 bolts.
Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf)
B135179
B135178
B135177
B135176
ET–88
EXTERIOR – BACK DOOR OUTSIDE GARNISH
ET
BODY
EXTERIOR
BACK DOOR OUTSIDE GARNISH
COMPONENTS
BACK DOOR SERVICE
HOLE COVER
BACK DOOR
TRIM BOARD
BACK DOOR TRIM
COVER LH
BACK DOOR TRIM
COVER RH
BUTYL TAPE
DOOR TRIM
RETAINER CAP
DOOR TRIM
RETAINER CAP
B135106E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст