Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 317
MA–10
MAINTENANCE – BODY
MA
BODY
GENERAL MAINTENANCE
1.
INSPECT BOLTS AND NUTS ON CHASSIS AND
BODY
(a) In addition to the scheduled maintenance items,
check for loose or missing bolts and nuts of the
following.
Canada:
•
Steering system
•
Drive train
•
Suspension system
•
Fuel tank mounts
•
Engine mounts, etc.
2.
FINAL INSPECTION
(a) Check the operation of the body parts:
(1) Hood:
•
Auxiliary catch operates properly
•
Hood locks securely when closed
(2) Front and rear doors:
•
Door locks operate properly
•
Doors close properly
(3) Back door:
•
Door lock operates properly
(4) Seats:
•
Seat adjusts easily and locks securely in any
position
•
Front seatback locks securely in any
position
•
Folding down rear seatbacks lock securely.
(b) Be sure to deliver a clean car. Especially check:
•
Steering wheel
•
Shift lever knob
•
All switch knobs
•
Door handles
•
Seats
METER – METER / GAUGE SYSTEM
ME–1
ME
METER / GAUGE SYSTEM
PRECAUTION
1.
DISCONNECT AND RECONNECT CABLE OF
NEGATIVE BATTERY TERMINAL
(a) Before performing electronic work, disconnect the
cable from the negative (-) battery terminal in order
to prevent it from shorting and burning out.
(b) Before disconnecting and reconnecting the battery
cable, turn the ignition switch OFF and the headlight
dimmer switch OFF. Then loosen the terminal nut
completely. Do not damage the cable or terminal.
(c) When the battery cable is disconnected, the clock
and radio settings and stored DTCs are erased.
Therefore, before disconnecting the battery cable,
make a note of them.
NOTICE:
When the cable is disconnected from the negative (-)
battery terminal, initialize the following system(s) after
the cable is reconnected.
Negative (-)
Battery Terminal
Cable
D033496E01
System name
See procedure
METER / GAUGE SYSTEM
ME–2
METER – METER / GAUGE SYSTEM
ME
PARTS LOCATION
SKID CONTROL ECU
ENGINE ROOM RELAY
BLOCK NO. 2
- AM2 FUSE
- DOME FUSE
BRAKE FLUID LEVEL
WARNING SWITCH
FUEL SENDER
GAUGE ASSEMBLY
E125392E01
METER – METER / GAUGE SYSTEM
ME–3
ME
HEADLIGHT
DIMMER
SWITCH
UNLOCK WARNING
SWITCH
CENTER AIRBAG
SENSOR ASSEMBLY
BACK DOOR
COURTESY
SWITCH
FRONT DOOR COURTESY
SWITCH LH
REAR DOOR COURTESY SWITCH LH (LOWER)
- TAILLIGHT RELAY
ECM
ACCESSORY METER ASSEMBLY*3
MAIN BODY ECU
(DRIVER SIDE J/B)
LIGHT
CONTROL
RHEOSTAT
4WD CONTROL
ECU*1
4WD
CONTROL
ECU*2
COMBINATION
METER ASSEMBLY
REAR DOOR
COURTESY
SWITCH RH
(UPPER)
FRONT DOOR
COURTESY
SWITCH RH
REAR DOOR COURTESY
SWITCH RH (LOWER)
REAR DOOR COURTESY
SWITCH LH (UPPER)
PARK / NEUTRAL
POSITION SWITCH*4
PARKING
BRAKE SWITCH
TURN SIGNAL
FLASHER
ASSEMBLY
*1: W/O REAR DIFFERENTIAL LOCK
*2: W/ REAR DIFFERENTIAL LOCK
*3: W/ ACCESSORY METER ASSEMBLY
*4: FOR AUTOMATIC TRANSAXLE
FRONT PASSENGER SEAT BELT
WARNING LIGHT
BACK WINDOW
LOCK
- BACK WINDOW
COURTESY
SWITCH
E125393E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст