Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 434
SEAT BELT – SEAT BELT TENSION REDUCER
SB–5
SB
SYSTEM DIAGRAM
from IG1 fuse
Front Seat Outer
Belt Assembly LH
Main Body
ECU
Front Seat Inner
Belt Assembly LH
(Buckle Switch)
C138616E01
SB–6
SEAT BELT – SEAT BELT TENSION REDUCER
SB
SYSTEM DESCRIPTION
The seat belt tension reducer is fitted to the front seat belt LH.
This mechanism can help reduce the belt tension applied to
the occupant in the front seat when the seat belt is fastened.
SEAT BELT – SEAT BELT TENSION REDUCER
SB–7
SB
PROBLEM SYMPTOMS TABLE
Seat Belt Tension Reducer
Symptom
Suspected area
See page
Driver side tension reducer does not operate
1. Front seat inner belt assembly (Driver side)
2. Front seat outer belt assembly (Driver side)
3. Wire harness
-
SB–6
SEAT BELT – SEAT BELT WARNING SYSTEM
SB
SEAT BELT WARNING SYSTEM
PRECAUTION
1.
DISCONNECT AND RECONNECT CABLE OF
NEGATIVE BATTERY TERMINAL
(a) Before performing electronic work, disconnect the
cable from the negative (-) battery terminal in order
to prevent it from shorting and burning out.
(b) When disconnecting and reconnecting the battery
cable, turn the ignition switch OFF and headlight
dimmer switch OFF. Then loosen the terminal nut
completely. Be careful not to damage the cable or
terminal.
(c) When the battery cable is disconnected, the settings
of the clock and radio, memory of DTCs, etc. are
erased. Before disconnecting the battery cable, take
notes of the settings and memory.
NOTICE:
When disconnecting the cable from the negative
(-) battery terminal, initialize the following
system(s) after the cable is reconnected.
Negative (-)
Battery Terminal
Cable
D033496E01
System Name
See procedure
Meter / gauge system
See page
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст