Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 210
ET–70
EXTERIOR – OUTSIDE MOULDING
ET
13. REMOVE ACCESS DOOR OUTSIDE MOULDING
SUB-ASSEMBLY
(a) Apply protective tape to the access door panel in the
area around the access door outside moulding.
(b) Remove the nut.
(c) Using a moulding remover, disengage the 4 clips
and remove the access door outside moulding.
(d) Turn the clips 90
° clockwise and remove them.
14. REMOVE SPARE TIRE
15. REMOVE BACK DOOR OUTSIDE MOULDING LH
(a) Apply protective tape to the back door panel in the
area around the back door outside moulding.
(b) Remove the screw.
Protective Tape
B135020E01
Moulding Remover
B135021E01
90°
B135058E01
Protective Tape
B135025E01
EXTERIOR – OUTSIDE MOULDING
ET–71
ET
(c) Using a moulding remover, disengage the 6 clips
and remove the back door outside moulding.
(d) Turn the clips 90
° clockwise and remove them.
16. REMOVE BACK DOOR OUTSIDE MOULDING RH
(a) Apply protective tape to the back door panel in the
area around the back door outside moulding.
(b) Remove the screw.
(c) Using a moulding remover, disengage the 6 clips
and remove the back door outside moulding.
Moulding Remover
B135026E01
90°
B135058E01
Protective Tape
B135029E01
Moulding Remover
B135030E01
ET–72
EXTERIOR – OUTSIDE MOULDING
ET
(d) Turn the clips 90
° clockwise and remove them.
90°
B135058E01
EXTERIOR – OUTSIDE MOULDING
ET–73
ET
INSTALLATION
HINT:
The procedure described below is for the LH side. Use the
same procedure for both the RH and LH sides, unless
otherwise specified.
1.
INSTALL BACK DOOR OUTSIDE MOULDING RH
(a) Install 6 new clips in the positions shown in the
illustration.
NOTICE:
If you install the clips wrongly, the installation of
the back door outside moulding will be
improper.
(b) Engage the 6 clips and install the back door outside
moulding.
(c) Tighten the screw.
(d) Remove the protective tape.
B135032
B135031
Protective Tape
B135029E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст