Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 452
SEAT – FRONT SEAT ASSEMBLY
SE–3
SE
FRONT SEAT ARMREST
ASSEMBLY
FRONT SEAT
ARMREST CAP
FRONT SEAT
ARMREST COVER
FRONT SEAT
CUSHION COVER
FRONT SEAT HEADREST
ASSEMBLY
FRONT SEAT HEADREST
SUPPORT
FRONT SEATBACK
COVER
FRONT SEAT
CUSHION PAD
N*m (kgf*cm, ft*lbf) : Specified torque
Non-reusable part
38 (385, 28)
5.5 (55, 49 in.*lbf)
FRONT SEATBACK
PAD
for Front Passenger Side:
for Driver Side:
w/ Front Seat Side Airbag:
x2
x14
x12
x2
B130679E01
SE–4
SEAT – FRONT SEAT ASSEMBLY
SE
FRONT SEAT CUSHION
LOWER SHIELD LH
FRONT SEAT CUSHION
LOWER SHIELD RH
OCCUPANT CLASSIFICATION ECU
RECLINING ADJUSTER
INSIDE COVER LH
RECLINING ADJUSTER
INSIDE COVER RH
RECLINING ADJUSTER
OUTSIDE COVER LH
RECLINING ADJUSTER
OUTSIDE COVER RH
SEAT POSITION
SENSOR
FRONT SEAT WIRE
VERTICAL SEAT
ADJUSTER BUSH
FRONT SEAT CUSHION
EDGE PROTECTOR
FRONT SEAT ADJUSTER
SUB-ASSEMBLY
for Front Passenger Side:
N*m (kgf*cm, ft*lbf) : Specified torque
8.0 (80, 71 in.*lbf)
for Driver Side:
w/ Front Seat Side Airbag:
B130702E01
SEAT – REAR SEAT ASSEMBLY (for RH Side)
SE–43
SE
REMOVAL
1.
REMOVE REAR SEAT CUSHION ASSEMBLY
(a) Remove the 2 bolts and the rear seat cushion.
2.
REMOVE REAR SEATBACK BOARD CARPET
ASSEMBLY
(a) Pull the rear seatback lock release button and tilt
the rear seatback forward.
(b) Disengage the 10 clips and remove the rear
seatback board carpet.
3.
REMOVE REAR SEATBACK ASSEMBLY
(a) Pull up the rear seatback.
(b) Remove the bolt and the anchor plate of the rear
center seat outer belt.
(c) Remove the rear seat inner belt from the rear
seatback holder.
(d) Pull the rear seatback lock release button and tilt
the rear seatback forward.
(e) Remove the 2 bolts.
(f)
Disengage the hook and remove the rear seatback.
B130747
B130749
B135127
B130750
SE–44
SEAT – REAR SEAT ASSEMBLY (for RH Side)
SE
DISASSEMBLY
CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat
cushion frame and the rear seatback frame could cause
injuries to your hands.
1.
REMOVE REAR SEAT CUSHION HINGE SUB-
ASSEMBLY
HINT:
Use the same procedure for both sides.
(a) Remove the bolt.
(b) Disengage the hook and remove the rear seat
cushion hinge.
2.
REMOVE REAR SEAT CUSHION UNDER COVER
(a) Remove the rear seat cushion stopper from the rear
seat cushion cover band and the slit of the rear seat
cushion under cover.
(b) Using a clip remover, remove the 7 clips and the
rear seat cushion under cover.
3.
REMOVE REAR SEAT CUSHION STOPPER
(a) Remove the screw and the rear seat cushion
stopper.
4.
REMOVE REAR SEAT CUSHION FRAME SUB-
ASSEMBLY
(a) Disengage the hook and remove the rear seat
cushion frame.
B130752
Band
B130753E01
B130754
B130755
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст