Toyota Corolla Hybrid (2021 year). Manual in english — part 5
269
5-3. Connectivity settings
COROLLA HV_U
5
Audio
2
Press the “MENU” button.
3
Select “Phone”.
Operations up to this point can also
be performed by pressing the
“PHONE” button on the instrument
panel.
4
Select “Yes” to register a
phone.
5
Select the desired Bluetooth
®
device.
If the desired Bluetooth
®
phone is
not on the list, select “If you cannot
find...” and follow the guidance on
the screen. (
6
Register the Bluetooth
®
device using your Blue-
tooth
®
device.
For details about operating
the Bluetooth
®
device, see
the manual that comes with it.
A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device
being connected, a message
confirming registration may
be displayed on the Blue-
tooth
®
device’s screen.
Respond and operate the
Bluetooth
®
device according
to the confirmation message.
7
Check that the following
screen is displayed, indicat-
ing pairing was successful (a
Bluetooth
®
link has been
-------------------------------------------------------------------------------------------------------------------------------------------------------------
270
5-3. Connectivity settings
COROLLA HV_U
established but registration is
not yet complete).
The system is connecting to
the registered device.
At this stage, the Bluetooth
®
functions are not yet avail-
able.
8
Check that “Connected” is
displayed and registration is
complete.
If an error message is displayed,
follow the guidance on the screen
to try again.
If a cellular phone does not operate
properly after being connected, turn
the cellular phone off and on and
then connect it again.
■
Registering from phone
1
Select “If you cannot find…”.
2
Select “Register from
Phone”.
3
Check that the following
screen is displayed, and reg-
ister the Bluetooth
®
device
using your Bluetooth
®
device.
For details about operating
the Bluetooth
®
device, see
the manual that comes with it.
A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
®
-------------------------------------------------------------------------------------------------------------------------------------------------------------
271
5-3. Connectivity settings
COROLLA HV_U
5
Audio
devices. Depending on the
type of Bluetooth
®
device
being connected, a message
confirming registration may
be displayed on the Blue-
tooth
®
device’s screen.
Respond and operate the
Bluetooth
®
device according
to the confirmation message.
4
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
7
.
(
To use the Bluetooth
®
audio, it is
necessary to register an audio
player with the system.
Once the player has been regis-
tered, it is possible to use the
Bluetooth
®
audio.
This operation cannot be per-
formed while driving.
For details about registering a
Bluetooth
®
device:
1
Turn the Bluetooth
®
connec-
tion setting of your audio
player on.
This function is not available when
the Bluetooth
®
connection setting
of your audio player is set to off.
2
Press the “AUDIO” button.
3
Select “Source” on the audio
screen or press “AUDIO” but-
ton again.
4
Select “Bluetooth”.
5
Select “Yes” to register an
audio player.
6
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
5
.
(
This system supports the follow-
ing services.
■
Bluetooth
®
Core Specifica-
tion
Ver. 2.0 (Recommended: Ver.
4.1 +EDR)
■
Profiles
HFP (Hands Free Profile) Ver.
1.0 (Recommended: Ver. 1.7)
This is a profile to allow hands-free
phone calls using a cellular phone.
It has outgoing and incoming call
functions.
OPP (Object Push Profile)
Ver. 1.1 (Recommended: Ver.
Registering a Bluetooth
®
audio player for the first
time
Profiles
-------------------------------------------------------------------------------------------------------------------------------------------------------------
272
5-3. Connectivity settings
COROLLA HV_U
1.2)
This is a profile to transfer contacts
data.
PBAP (Phone Book Access
Profile) Ver. 1.0 (Recom-
mended: Ver. 1.2)
This is a profile to transfer phone-
book data.
MAP (Message Access Pro-
file) Ver. 1.0 (Recommended:
Ver. 1.2)
This is a profile to use phone mes-
sage functions.
SPP (Serial Port Profile) Rec-
ommended: Ver. 1.2
This is a profile to use the Toyota
audio multimedia function.
A2DP (Advanced Audio Dis-
tribution Profile) Ver. 1.0 (Rec-
ommended: Ver. 1.3)
This is a profile to transmit stereo
audio or high quality sound to the
audio/visual system.
AVRCP (Audio/Video Remote
Control Profile) Ver. 1.0 (Rec-
ommended: Ver. 1.6)
This is a profile to allow remote
control the A/V equipment.
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Bluetooth”.
Setting Bluetooth
®
details
When an Apple CarPlay
connection is established,
this function will be unavail-
able.
*
When an Android Auto con-
nection is established,
some functions will be
unavailable.
*
*
: This function is not made avail-
able in some countries or
areas.
Displaying the Blue-
tooth
®
setup screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
273
5-3. Connectivity settings
COROLLA HV_U
5
Audio
4
Select the desired item to be
set.
Connecting a Bluetooth
®
device and editing the Blue-
tooth
®
device information
(
Registering a Bluetooth
®
device (
Deleting a Bluetooth
®
device
(
Setting the Bluetooth
®
sys-
tem (
Up to 5 Bluetooth
®
devices
(Phones (HFP) and audio play-
ers (AVP)) can be registered.
If more than 1 Bluetooth
®
device
has been registered, select
which device to connect to.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Registered Device”.
3
Select the device to be con-
nected.
: Phone
: Audio player
: Phone/Toyota apps services
The profile icon for a currently
connected device will be dis-
played in color.
Selecting a profile icon which
is not currently connected will
switch the connection to the
function.
If the desired Bluetooth
®
device is not on the list, select
“Add New Device” to register
the device. (
Bluetooth
®
setup screen
Connecting a Bluetooth
®
device
-------------------------------------------------------------------------------------------------------------------------------------------------------------
274
5-3. Connectivity settings
COROLLA HV_U
4
Select the desired connec-
tion.
“Device Info”: Select to confirm and
change the Bluetooth
®
device infor-
mation. (
When another Bluetooth
®
device is connected
To disconnect the Bluetooth
®
device, select “Yes”.
5
Check that a confirmation
screen is displayed when the
connection is complete.
If an error message is displayed,
follow the guidance on the screen
to try again.
●
It may take time if the device con-
nection is carried out during Blue-
tooth
®
audio playback.
●
Depending on the type of Blue-
tooth
®
device being connected, it
may be necessary to perform
additional steps on the device.
●
When disconnecting a Bluetooth
®
device, it is recommended to dis-
connect using the system.
■
Connecting a Bluetooth
®
device in a different way
(from phone top screen)
■
Connecting a Bluetooth
®
device in a different way
(from phone setup screen)
■
Connecting a Bluetooth
®
device in a different way
(from Bluetooth
®
audio
screen)
■
Auto connection mode
To turn auto connection mode
on, set “Bluetooth Power” to on.
(
P.277) Leave the Bluetooth
®
device in a location where the
connection can be established.
When the power switch is in
ACC or ON, the system
searches for a nearby regis-
tered device.
The system will connect with
the registered device that was
last connected, if it is nearby.
When automatic connection
priority is set to on and there
is more than one registered
Bluetooth
®
phone available,
the system will automatically
connect to the Bluetooth
®
phone with the highest prior-
ity. (
■
Connecting manually
When the auto connection has
failed or “Bluetooth Power” is
turned off, it is necessary to con-
nect the Bluetooth
®
device man-
ually.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
275
5-3. Connectivity settings
COROLLA HV_U
5
Audio
1
Display the Bluetooth
®
set-
tings screen. (
2
Follow the steps in “Connect-
ing a Bluetooth
®
device” from
step
2
. (
■
Reconnecting the Blue-
tooth
®
phone
If a Bluetooth
®
phone is discon-
nected due to poor reception
from the Bluetooth
®
network
when the power switch is in
ACC or ON, the system auto-
matically reconnects the Blue-
tooth
®
phone.
Up to 5 Bluetooth
®
devices can
be registered.
Bluetooth
®
compatible phones
(HFP) and audio players (AVP)
can be registered simultane-
ously.
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Add New Device”.
When another Bluetooth
®
device is connected
To disconnect the Bluetooth
®
device, select “Yes”.
When 5 Bluetooth
®
devices
have already been registered
A registered device needs to be
replaced. Select “Yes”, and select
the device to be replaced.
3
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
5
.
(
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Remove Device”.
3
Select the desired device.
4
Select “Yes” when the confir-
mation screen appears.
5
Check that a confirmation
screen is displayed when the
operation is complete.
When deleting a Bluetooth
®
phone,
the contact data will be deleted at
the same time.
Registering a Bluetooth
®
device
Deleting a Bluetooth
®
device
-------------------------------------------------------------------------------------------------------------------------------------------------------------
276
5-3. Connectivity settings
COROLLA HV_U
The Bluetooth
®
device’s infor-
mation can be displayed on the
screen. The displayed informa-
tion can be edited.
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Registered Device”.
3
Select the desired device to
be edited.
4
Select “Device Info”.
5
Confirm and change the
Bluetooth
®
device informa-
tion.
The name of the Bluetooth
®
device is displayed. It can be
changed to a desired name.
(
Select to set the Bluetooth
®
audio player connection
method. (
Device address is unique to
the device and cannot be
changed.
Phone number is unique to
the Bluetooth
®
phone and
cannot be changed.
Compatibility profile is unique
to the Bluetooth
®
device and
cannot be changed.
Select to reset all setup
items.
Editing the Bluetooth
®
device information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
277
5-3. Connectivity settings
COROLLA HV_U
5
Audio
●
If 2 Bluetooth
®
devices have been
registered with the same device
name, the devices can be distin-
guished referring to the device’s
address.
●
Depending on the type of Blue-
tooth
®
phone, some information
may not be displayed.
1
Select “Device Name”.
2
Enter the name and select
“OK”.
Even if the device name is changed,
the name registered in your Blue-
tooth
®
device does not change.
1
Select “Connect Audio Player
From”.
2
Select the desired connec-
tion method.
“Vehicle”: Select to connect the
audio player from the vehicle’s
audio/visual system.
“Device”: Select to connect the
vehicle’s audio/visual system from
the audio player.
Depending on the audio player, the
“Vehicle” or “Device” connection
method may be best. As such, refer
to the manual that comes with the
audio player.
The Bluetooth
®
settings can be
confirmed and changed.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Detailed Settings”.
3
Select the desired item to be
set.
Select to set Bluetooth
®
con-
nection on/off. (
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
devices. (
Select to edit the system
information. (
Select to reset all setup
items.
1
Select “Bluetooth Power”.
When “Bluetooth Power” is on:
The Bluetooth
®
device is auto-
Changing a device name
Setting audio player con-
nection method
“Detailed Settings”
screen
Changing “Bluetooth
Power”
-------------------------------------------------------------------------------------------------------------------------------------------------------------
278
5-3. Connectivity settings
COROLLA HV_U
matically connected when the
power switch is in ACC or ON.
When “Bluetooth Power” is off:
The Bluetooth
®
device is dis-
connected, and the system will
not connect to it next time.
While driving, the auto connection
state can be changed from off to on,
but cannot be changed from on to
off.
The automatic connection prior-
ity of the registered Bluetooth
®
devices can be changed.
1
Select “Preferred Device Set-
tings”.
2
Select the desired item to be
set.
Select to set automatic con-
nection priority on/off.
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
phones. (
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
audio players. (
Select to reset all setup
items.
■
Changing Bluetooth
®
device automatic connec-
tion priority
1
Select “Preferred Phones” or
“Preferred Audio Players”.
2
Select the desired Bluetooth
®
device and select “Move Up”
or “Move Down” to change
the preferred order.
A newly registered Bluetooth
®
device will automatically be given
the highest automatic connection
priority.
1
Select “System Information”.
Setting automatic connec-
tion priority
Editing the system infor-
mation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
279
5-3. Connectivity settings
COROLLA HV_U
5
Audio
2
Select the desired item to be
set.
Displays system name. Can
be changed to a desired
name. (
PIN code used when the
Bluetooth
®
device was regis-
tered. Can be changed to a
desired code. (
Device address is unique to
the device and cannot be
changed.
Select to set the connection
status display of the phone
on/off.
Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system
Select to reset all setup
items.
■
Editing the system name
1
Select “System Name”.
2
Enter a name and select
“OK”.
■
Editing the PIN code
1
Select “System PIN Code”.
2
Enter a PIN code and select
“OK”.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
280
5-3. Connectivity settings
COROLLA HV_U
*
: If equipped
1
Enable the Wi-Fi
®
Hotspot
function. (
2
Disable the “Hide Access
Point” function. (
3
Search for the vehicle access
point using the device you
wish to connect.
For details about operating the
device, refer to the documentation
which came with it.
4
Operate the device to con-
nect it to the vehicle access
point.
To check the vehicle access point
password, check “Password”.
(
Hints for connecting to the vehicle
via Wi-Fi
®
can be displayed.
(
1
Enable the Wi-Fi
®
Hotspot
function. (
2
Enable the “Hide Access
Point” function. (
3
Enter the access point name
(SSID) into the device you
wish to connect and connect
it.
To check the vehicle access
point password, check “Pass-
word”. (
The security settings on the
device must be the same as
that displayed for “Security”.
(
For details about operating
the device, refer to the docu-
mentation which came with it.
Wi-Fi
®
Hotspot
*
By connecting a device to
the vehicle via Wi-Fi
®
, it can
access the internet through
the DCM.
To use this function, a
Wi-Fi
®
Hotspot service sub-
scription from Verizon Wire-
less is required. Contact
your Toyota dealer for
details.
This function is not made
available in some countries
or areas.
Connecting a device to
the in-vehicle access
point
Searching for and con-
necting a device to the
vehicle access point
Connecting a device to the
in-vehicle access point
using the access point
name (SSID)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
281
5-3. Connectivity settings
COROLLA HV_U
5
Audio
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Wi-Fi
*
”.
*
: Wi-Fi
®
is a registered trademark
of Wi-Fi Alliance
®
.
4
Select the desired item to be
set.
Select to enable/disable the
Wi-Fi
®
Hotspot function.
(
Select to check/change the
access point password.
(
Select to display hints for
connecting to the vehicle via
Wi-Fi
®
.
Select to make the access
point searchable/unsearch-
able.
Select to check/change the
security protocol of the
access point (for authentica-
tion and encryption).
(
Select to change the access
point name (SSID). (
Select to change the Wi-Fi
®
connection channel (within
the 2.4GHz frequency band).
(
If any settings have been changed,
it will be necessary to reset the
Wi-Fi
®
system to complete the
changes. To reset the Wi-Fi
®
sys-
tem, select “Yes” on the pop-up dis-
played after changing the settings.
When the Wi-Fi
®
Hotspot func-
tion is enabled, the system
checks for a valid Hotspot ser-
vice subscription.
If a hotspot service subscription
has not been started, connect
your device to the in-vehicle
access point to start your sub-
Changing the Wi-Fi
®
set-
tings
Enabling/disabling the
Wi-Fi
®
Hotspot function
-------------------------------------------------------------------------------------------------------------------------------------------------------------
282
5-3. Connectivity settings
COROLLA HV_U
scription. A trial subscription
may be available.
1
Select “Password”.
2
Check that the following
screen is displayed.
Displays the password
Select to display/hide the
entered password.
Select to change the pass-
word.
1
Select “Change Password”.
2
Enter the desired password
and select “OK”.
When setting/changing a pass-
word, observe the following guide-
lines to help prevent the password
from being cracked by a third party:
Use an 8-character or longer
password consisting of letters
and numbers. (Non-ASCII
characters will not be recog-
nized by the system.)
Change the password regu-
larly.
If you write the password
down, do not leave it some-
where where it would be visi-
ble.
Do not use the same or a sim-
ilar password to that for other
accounts.
Avoid using easy to identify
words, such as your vehicle’s
model name or license plate
number, simple dictionary
words, or words with simple
obfuscation, such as c@t (for
cat), as your password.
1
Select “Security”.
2
Select the desired security
protocol.
1
Select “Access Point Name”.
2
Enter the desired access
point name (SSID) and select
“OK”.
1
Select “Channel”.
Checking/changing the
password
Changing the password
Changing the security pro-
tocol
Changing the access point
name (SSID)
Selecting a Wi-Fi
®
connec-
tion channel
-------------------------------------------------------------------------------------------------------------------------------------------------------------
283
5-3. Connectivity settings
COROLLA HV_U
5
Audio
2
Check that the following
screen is displayed.
Select to change the chan-
nel selection to auto-
matic/manual.
When “Manual” is selected,
select to change the channel.
1
Set “Select Channel” to
“Manual”.
2
Select “Channel Number”.
3
Enter the desired channel
number and select “OK”.
Channels 1 through 11 can be
selected.
■
Wi-Fi
®
function operating hints
●
If a connected device is taken out
of the Wi-Fi
®
connection area, the
connection will be severed.
●
If the vehicle is driven out of the
cellular communication coverage
area, connecting to the internet
via the Wi-Fi
®
Hotspot will not be
possible.
●
If a Bluetooth
®
device is used
while a device is connected using
the Wi-Fi
®
Hotspot function, the
communication speed may
decrease.
●
If the vehicle is near a radio
antenna, radio station or other
source of strong radio waves and
electrical noise, communication
may be slow or impossible.
The condition of Wi-Fi
®
connec-
tion appears on the right upper
side of the screen. (
Changing the channel
Wi-Fi
®
function operating
hints
WARNING
●
Use Wi-Fi
®
devices only when
safe and legal to do so.
●
Your audio unit is fitted with
Wi-Fi
®
antennas. People with
implantable cardiac pacemak-
ers, cardiac resynchronization
therapy-pacemakers or implant-
able cardioverter defibrillators
should maintain a reasonable
distance between themselves
and the Wi-Fi
®
antennas.
The radio waves may affect the
operation of such devices.
●
Before using Wi-Fi
®
devices,
users of any electrical medical
device other than implantable
cardiac pacemakers, cardiac
resynchronization ther-
apy-pacemakers or implantable
cardioverter defibrillators should
consult the manufacturer of the
device for information about its
operation under the influence of
radio waves.
Radio waves could have unex-
pected effects on the operation
of such medical devices.
Conditions displayed with
Wi-Fi
®
icon
-------------------------------------------------------------------------------------------------------------------------------------------------------------
284
5-3. Connectivity settings
COROLLA HV_U
Communication standards
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (2.4GHz)
Security
WPA™
WPA2™
• WPA™ and WPA2™ are trade-
marks of Wi-Fi Alliance
®
.
*
: This function is not made avail-
able in some countries or areas.
1
Enable Siri on the device to
be connected.
Specifications
Apple CarPlay/
Android Auto
*
Apple CarPlay allows some
applications, such as Map,
Phone, and Music, to be
used on the system.
When an Apple CarPlay
connection is established,
Apple CarPlay compatible
applications will be dis-
played on the system dis-
play.
Compatible devices
Apple iPhone (iOS Ver. 9.3 or
later) that supports Apple Car-
Play.
For details, refer to
https://www.apple.com/ios/car
play/.
*
Android™ devices with Android
OS Ver. 5.0 or higher which sup-
port Android Auto and have the
Android Auto application
installed.
For details, refer to
https://www.android.com/auto/
.
*
*
: Some devices may not operate
with this system.
Establishing an Apple
CarPlay connection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
285
5-3. Connectivity settings
COROLLA HV_U
5
Audio
2
Connect the device to the
USB port. (
3
Select “Always Enable” or
“Enable Once”.
If “Do Not Enable” is selected,
an Apple CarPlay connection
will not be established. In this
case, the device can be oper-
ated as a normal Apple
device, such as an iPod.
Depending on the device con-
nected, it may take approxi-
mately 3 to 6 seconds before
an Apple CarPlay connection
is established.
4
Check that home screen of
Apple CarPlay is displayed.
Select to display the home
screen of Apple CarPlay.
Touch and hold to activate
Siri.
Select to start the application.
User can use any iPhone
application supported by
Apple CarPlay.
Select to display the system
screen.
1
Check that the Android Auto
application is installed to the
device to be connected.
2
Connect the device to the
USB port. (
3
Select “On” to enable the
function.
“Off”: Select to not enable
Android Auto. Android Auto
will remain off until “Android
Auto” of “Projection Settings”
on the general settings screen
is turned on.
Depending on the device con-
nected, it may take approxi-
mately 3 to 6 seconds before
the system returns to previous
screen.
The screen may change to
“step
6
” depending on the
system.
Establishing an Android
Auto connection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
286
5-3. Connectivity settings
COROLLA HV_U
4
Press the “MENU” button.
5
Select “Android Auto”.
6
Check that home screen of
Android Auto is displayed.
●
When an Apple CarPlay/Android
Auto connection is established,
the function of some system but-
tons will change.
●
When an Apple CarPlay/Android
Auto connection is established,
some system functions, such as
the following, will be replaced by
similar Apple CarPlay/Android
Auto functions or will become
unavailable:
• iPod (Audio Playback)
• Hands-free Phone
• USB audio/USB video
• Bluetooth
®
audio
• Bluetooth
®
phone (Apple CarPlay
only)
• Toyota apps
●
When an Apple CarPlay/Android
Auto connection is established,
voice command system (Siri/Goo-
gle Assistant) and map application
voice guidance volume can be
changed by selecting “Voice Vol-
ume” on the voice settings screen.
It cannot be changed by “POWER
VOLUME” knob on Audio control
panel. (
●
Apple CarPlay/Android Auto is an
application developed by Apple
Inc/Google LLC. Its functions and
services may be terminated or
changed without notice depending
on the connected device’s opera-
tion system, hardware and soft-
ware, or due to changes in Apple
CarPlay/Android Auto specifica-
tions.
●
For a list of the apps supported by
Apple CarPlay or Android Auto,
refer to their respective website.
●
While using these functions, vehi-
cle and user information, such as
location and vehicle speed, will be
shared with the respective appli-
cation publisher and the cellular
service provider.
●
By downloading and using each
application, you agree to their
terms of use.
●
Data for these functions is trans-
mitted using the internet and may
incur charges.
For information about data trans-
mission fees, contact your cellular
service provider.
●
Depending on the application, cer-
tain functions, such as music play-
back, may be restricted.
●
As the applications for each func-
tion are provided by a third-party,
they may be subject to change or
discontinuation without notice.
For details, refer to the website of
the function.
●
If the USB cable is disconnected,
operation of Apple Car-
Play/Android Auto will end.
At this time, sound output will stop
and change to the system screen.
●
Use of the Apple CarPlay logo
means that a vehicle user inter-
face meets Apple performance
standards. Apple is not responsi-
ble for the operation of this vehicle
-------------------------------------------------------------------------------------------------------------------------------------------------------------
287
5-3. Connectivity settings
COROLLA HV_U
5
Audio
or its compliance with safety and
regulatory standards. Please note
that the use of this product with
iPhone or iPod may affect wire-
less performance.
●
Apple CarPlay is a trademark of
Apple Inc.
●
Compatible models
Made for
• iPhone X
• iPhone 8
• iPhone 8 Plus
• iPhone 7
• iPhone 7 Plus
• iPhone SE
• iPhone 6s
• iPhone 6s Plus
• iPhone 6
• iPhone 6 Plus
• iPhone 5s
• iPhone 5c
• iPhone 5
●
Android and Android Auto are
trademarks of Google LLC.
If you are experiencing difficulties with Apple CarPlay/Android Auto,
check the following table.
WARNING
Do not connect iPhone or operate
the controls while driving.
NOTICE
●
Do not leave your iPhone in the
vehicle. In particular, high tem-
peratures inside the vehicle
may damage the iPhone.
●
Do not push down on or apply
unnecessary pressure to the
iPhone while it is connected as
this may damage the iPhone or
its terminal.
●
Do not insert foreign objects into
the port as this may damage the
iPhone or its terminal.
Troubleshooting
-------------------------------------------------------------------------------------------------------------------------------------------------------------
288
5-3. Connectivity settings
COROLLA HV_U
Symptom
Solution
An Apple Car-
Play/Android Auto con-
nection cannot be
established.
Check if the device supports Apple Car-
Play/Android Auto.
Check if Apple CarPlay/Android Auto is
enabled on the connected device.
Check if that the Android Auto application is
installed to the device to be connected.
For details, refer to
Apple CarPlay:
https://www.apple.com/ios/carplay/.
Android Auto:
https://www.android.com/auto/.
Check if “Apple CarPlay”/“Android Auto” of
“Projection Settings” on the general settings
screen is set to on. (
Check if the USB cable being used is securely
connected to the device and USB port.
Check that the device is connected directly to
the USB port of the system and not connected
to a USB hub.
For Apple CarPlay: Check if the Lightning cable
being used is certified by Apple. Check if Siri is
enabled.
After checking all of the above, try to establish
an Apple CarPlay/Android Auto connection.
(
When an Apple Car-
Play/Android Auto con-
nection is established and
a video is being played,
the video is not displayed,
but audio is output
through the system.
As the system is not designed to play video
through Apple CarPlay/Android Auto, this is not
a malfunction.
Although an Apple Car-
Play/Android Auto con-
nection is established,
audio is not output
through the system.
The system may muted or the volume may be
low. Increase the system volume.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
289
5-3. Connectivity settings
COROLLA HV_U
5
Audio
The Apple Car-
Play/Android Auto screen
has artifacts and/or audio
from Apple Car-
Play/Android Auto has
noise.
Check if the USB cable being used to connect
the device to the system is damaged.
To check if the USB cable is damaged inter-
nally, connect the device to another system,
such as a PC, and check if the device is recog-
nized by the connected system. (The device
should begin charging when connected.)
After checking all of the above, try to establish
an Apple CarPlay/Android Auto connection.
(
The map display of the
Apple CarPlay Maps app
cannot be enlarged or
contracted with pinch
multi-touch gestures.
As the Apple CarPlay Maps app is not compati-
ble with pinch multi-touch gestures, this is not a
malfunction.
During Apple CarPlay
music application (Apple
Music, Spotify, etc.) play-
back, if the iPhone is
operated to start and play
audio from an application
that is not compatible with
Apple CarPlay* and the
onboard device volume is
changed, the audio of the
incompatible application
stops and the system
resumes playback of the
original music application.
This operation is performed according to the
specification of the onboard device, this is not a
malfunction.
After interrupt audio (such
as navigation route guid-
ance) is played from an
application that is not
compatible with Apple
CarPlay while the onboard
device is playing audio,
the system does not
resume playback of the
original audio.
This operation is performed according to the
specification of the onboard device, this is not a
malfunction.
Manually change the audio source by yourself.
Or, do not use applications that are not compat-
ible with Apple CarPlay.
*
Due to some naviga-
tion applications are compatible from iOS 12,
update to the latest iOS and application ver-
sions.
Symptom
Solution
-------------------------------------------------------------------------------------------------------------------------------------------------------------
290
5-3. Connectivity settings
COROLLA HV_U
*
: Applications not compatible with Apple CarPlay are applications installed
on the iPhone that are not displayed on the Apple CarPlay screen appli-
cation list. (such as visual voicemail)
When using Apple Car-
Play, route guidance
arrows and turn by turn
navigation are not dis-
played on the multi-infor-
mation display and
system display.
When using Android Auto,
turn by turn navigation is
not displayed on the
multi-information display
and system display.
This is not a malfunction as display of these
items is not possible with this function.
When using Android Auto,
hands-free call audio can-
not be heard from the
vehicle’s speakers.
Disconnect the phone from the USB cable and
check if hands-free call audio can be heard
using the hands-free system.
Connect the phone to the system using Android
Auto, turn up the volume on the system and
check if hands-free call audio can be heard.
Check if other sounds can be heard from the
vehicle’s speakers.
Symptom
Solution
-------------------------------------------------------------------------------------------------------------------------------------------------------------
291
5-4. Other settings
COROLLA HV_U
5
Audio
5-4.Other settings
1
Press the “MENU” button.
2
Select “Setup”.
If the general settings screen is not
displayed, select “General”.
3
Select the desired items to
be set.
“Clock”
Select to change the time zone and
select “On” or “Off” for daylight sav-
ing time, automatic adjustment of
the clock, etc. (
“Language”
Select to change the language. The
language setting of Apple Car-
Play/Android Auto can only be
changed on the connected device.
“Customize Home Screen”
Select to change the display infor-
mation/area on the home screen
and the home screen layout.
(
“Theme Setting”
Select to change the screen theme
setting.
“Beep”
Select to turn the beep sound
on/off.
“Units of Measurement”
Select to change the unit of mea-
sure for distance/fuel consumption.
“Keyboard Layout”
Select to change the keyboard lay-
out.
“Delete Keyboard History”
Select to delete the keyboard his-
tory.
“Memorize Keyboard History”
Select to set the memorize key-
board history on/off.
“Animation”
Select to turn the animations on/off.
“Projection Settings”
*1
Select to set automatic Apple Car-
Play/Android Auto connection
establishment on/off. (
“Driver Setting”
Select to change the driver set-
General settings
Settings are available for
clock, operation sounds,
etc.
Displaying the general
settings screen
General settings screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
292
5-4. Other settings
COROLLA HV_U
tings. (
“Delete Personal Data”
Select to delete personal data.
(
“Software Update”
Select to update software versions.
For details, contact your Toyota
dealer.
“Software Update Setting”
*2
Select to set software update set-
ting. (
“Gracenote Database
Update”
Select to update Gracenote
®
data-
base versions. For details, contact
your Toyota dealer.
“Software Information”
Select to display the software infor-
mation. Notices related to third
party software used in this product
are enlisted. (This includes instruc-
tions for obtaining such software,
where applicable.)
“SW Sensitivity Level”
Select to change the capacitive
touch screen button sensitivity to 1
(low), 2 (medium), or 3 (high).
*1
:This function is not made avail-
able in some countries or areas.
*2
:If equipped
1
Display the general settings
screen. (
2
Select “Clock”.
3
Select the desired items to
be set.
Select to change the time
zone. (
Select to set daylight saving
time on/off.
Select to set automatic
adjustment of the clock by
GPS on/off.
When set to off, the clock can
be manually adjusted.
(
Select to set the 24 hour time
format on/off.
When set to off, the clock is
displayed in 12 hour time for-
mat.
1
Select “Time Zone”.
2
Select the desired time zone.
When “Auto Adjust by GPS” is
turned off, the clock can be
manually adjusted.
1
Select “Auto Adjust by GPS”
to set to off.
Clock settings
Setting the time zone
Manual clock setting
-------------------------------------------------------------------------------------------------------------------------------------------------------------
293
5-4. Other settings
COROLLA HV_U
5
Audio
2
Adjust the clock manually.
Select “+” to set the time for-
ward one hour and “-” to set
the time back one hour.
Select “+” to set the time for-
ward one minute and “-” to
set the time back one minute.
Select to round to the nearest
hour.
e.g.
1:00 to 1:29
1:00
1:30 to 1:59
2:00
*
: This function is not made avail-
able in some countries or areas.
1
Display the general settings
screen. (
2
Select “Projection Settings”.
3
Select the desired items to
be set.
Select to turn Apple CarPlay
connection establishment
on/off when a compatible
iPhone is connected to the
system via USB. (
Depending on the system,
this setting cannot be
changed when a device is
connected to the system via
USB. Disconnect the device
before attempting to change
the setting.
Select to turn Android Auto
connection establishment
on/off when a compatible
device is connected to the
system via USB. (
Depending on the system,
this setting cannot be
changed when a device is
connected to the system via
USB. Disconnect the device
before attempting to change
the setting.
The driver settings feature will
allow the system to link some
preferences (such as audio pre-
sets, screen theme, language,
etc.) to a paired Bluetooth
®
phone.
1
Display the general settings
screen. (
2
Select “Driver Setting”.
Projection settings
*
Driver settings
-------------------------------------------------------------------------------------------------------------------------------------------------------------
294
5-4. Other settings
COROLLA HV_U
3
Select “Enable This Feature”.
1
Select “Manually Select
Linked Settings”.
2
Select the desired phone.
After a few seconds, loaded screen
automatically switches to the home
screen.
Registered or changed per-
sonal settings will be deleted or
returned to their default condi-
tions.
1
Display the general settings
screen. (
2
Select “Delete Personal
Data”.
3
Select “Delete”.
4
Select “Yes” when the confir-
mation screen appears.
Examples of settings that can be
returned to their default conditions:
Audio settings
Phone settings
etc.
*
: This function is not made avail-
able in some countries or areas.
When the automatic update
check function is enabled, if a
software update is available
from the Toyota response cen-
ter, a message will be displayed.
1
Display the general settings
screen. (
2
Select “Software Update Set-
ting”.
3
Select “Automatic Update
Check” to enable/disable the
automatic update check func-
tion.
When software update information
is displayed, contact your Toyota
dealer.
Manually select linked set-
tings
Deleting personal data
Software update settings
*
-------------------------------------------------------------------------------------------------------------------------------------------------------------
295
5-4. Other settings
COROLLA HV_U
5
Audio
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Voice”.
4
Select the desired items to
be set.
Select to adjust the volume of
voice guidance.
Select to set the voice recog-
nition prompts.
Select to train voice recogni-
tion.
The voice command system
adapts the user accent.
Select to start the voice rec-
ognition tutorial.
Select to set the voice
prompt interrupt on/off.
Select to reset all setup
items.
Voice settings
Voice volume, etc. can be
set.
Displaying the voice set-
tings screen
Voice settings screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
296
5-4. Other settings
COROLLA HV_U
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Vehicle”.
4
Select the desired items to
be set.
Select to set vehicle customi-
zation. (
Select to set valet mode.
(
The security system can be set
to on by entering a security code
(4-digit number).
When set to on, the system will
become inoperative once the
electrical power source is dis-
connected until the security
code is entered.
1
Display the vehicle settings
screen. (
2
Select “Valet Mode”.
3
Enter the 4-digit personal
code and select “OK”.
4
Enter the same 4-digit per-
sonal code again and select
“OK”.
The system will request that
you input the security code
again to confirm that you
remember it correctly.
When valet mode activates,
the system stops and a secu-
rity code (4-digit number)
standby screen is displayed.
If the 4-digit personal code is forgot-
ten, please contact your Toyota
dealer.
Enter the 4-digit personal code
and select “OK”.
If an incorrect security code (4-digit
number) is entered 6 times, the sys-
tem will not accept another security
Vehicle settings
Settings are available for
vehicle customization, etc.
Displaying the vehicle
settings screen
Vehicle settings screen
Setting the valet mode
If the valet mode has been
activated
-------------------------------------------------------------------------------------------------------------------------------------------------------------
297
5-4. Other settings
COROLLA HV_U
5
Audio
code (4-digit number) for 10 min-
utes.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
298
5-5. Using the audio/visual system
COROLLA HV_U
5-5.Using the audio/visual system
The audio control screen can be reached by the following methods:
From the “AUDIO” button
Press the “AUDIO” button.
From the “MENU” button
Press the “MENU” button, then select “Audio”.
• Using the radio (
• Playing a USB memory (
• Playing an iPod/iPhone (Apple CarPlay
*
) (
• Using the Android Auto
*
(
• Playing a Bluetooth
®
device (
• Using the steering wheel audio switches (
• Audio system settings (
*
: This function is not made available in some countries or areas.
Quick reference
Functional overview
-------------------------------------------------------------------------------------------------------------------------------------------------------------
299
5-5. Using the audio/visual system
COROLLA HV_U
5
Audio
“POWER VOLUME” knob:
Press to turn the audio/visual
system on and off. The system
turns on in the last mode used.
Turn this knob to adjust the vol-
ume.
1
Press the “AUDIO” button.
2
Select “Source” or press
“AUDIO” button again.
3
Select the desired source.
●
Dimmed screen buttons cannot be
operated.
●
When there are two pages, select
or
to change the page.
●
When an Apple CarPlay/Android
Auto connection is established,
some system functions, such as
the following, will be replaced by
similar Apple CarPlay/Android
Auto function or will become
unavailable
*
:
• iPod (Audio Playback)
• USB audio/USB video
• Bluetooth
®
audio
• Toyota apps
*
: This function is not made avail-
able in some countries or areas.
1
Display the audio source
selection screen. (
2
Select “Reorder”.
Some basics
This section describes
some of the basic features
of the audio/visual system.
Some information may not
pertain to your system.
Your audio/visual system
works when the power
switch is in ACC or ON.
NOTICE
To prevent the battery from being
discharged, do not leave the
audio/visual system on longer
than necessary when the hybrid
system is not running.
Turning the system on
and off
Selecting an audio source
Reordering the audio
source
-------------------------------------------------------------------------------------------------------------------------------------------------------------
300
5-5. Using the audio/visual system
COROLLA HV_U
3
Select the desired audio
source then
or
to reor-
der.
4
Select “OK”.
Connect a device.
Turn on the power of the device if it
is not turned on.
●
If a USB hub is plugged-in, two
devices can be connected at a
time.
●
Even if a USB hub is used to con-
nect more than two USB devices,
only the first two connected
devices will be recognized.
●
If a USB hub that has more than
two ports is connected to the USB
port, devices connected to the
USB hub may not charge or be
inoperable, as the supply of cur-
rent may be insufficient.
1
Display the audio control
screen. (
2
Select “Sound”.
3
Select the desired item to be
set.
Select to set the tre-
ble/mid/bass. (
Select to set the fader/bal-
ance. (
Select to set the automatic
sound levelizer. (
■
Treble/Mid/Bass
How good an audio program
sounds is largely determined by
the mix of the treble, mid and
bass levels. In fact, different
kinds of music and vocal pro-
grams usually sound better with
different mixes of treble, mid
and bass.
1
Select “Treble/Mid/Bass”.
2
Select the desired screen
button.
Select “+” or “-” to adjust
high-pitched tones.
USB port
Sound settings
-------------------------------------------------------------------------------------------------------------------------------------------------------------
301
5-5. Using the audio/visual system
COROLLA HV_U
5
Audio
Select “+” or “-” to adjust
mid-pitched tones.
Select “+” or “-” to adjust
low-pitched tones.
■
Fader/Balance
A good balance of the left and
right stereo channels and of the
front and rear sound levels is
also important.
Keep in mind that when listening
to a stereo recording or broad-
cast, changing the right/left bal-
ance will increase the volume of
1 group of sounds while
decreasing the volume of
another.
1
Select “Fader/Balance”.
2
Select the desired screen
button.
Select to adjust the sound
balance between the front
and rear speakers.
Select to adjust the sound
balance between the left and
right speakers.
■
Automatic sound levelizer
(ASL)
The system adjusts to the opti-
mum volume and tone quality
according to vehicle speed to
compensate for increased road
noise, wind noise, or other
noises while driving.
1
Select “Automatic Sound
Levelizer”.
2
Select “High”, “Mid”, “Low” or
“Off”.
■
Screen format settings
The screen format can be
selected for USB video.
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Audio”.
4
Select “Common”.
5
Select “Screen Format”.
6
Select the desired item to be
adjusted.
Select to display a 4 : 3
screen, with either side in
black.
Select to enlarge the image
horizontally and vertically to
full screen.
Select to enlarge the image
by the same ratio horizontally
Audio screen adjustment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
302
5-5. Using the audio/visual system
COROLLA HV_U
and vertically.
■
Contrast and brightness
adjustment
The contrast and brightness of
the screen can be adjusted.
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Audio”.
4
Select “Common”.
5
Select “Display”.
6
Select the desired item to be
adjusted.
“Contrast”
“+”: Select to strengthen the con-
trast of the screen.
“-”: Select to weaken the contrast of
the screen.
“Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Depending on the audio source,
some functions may not be avail-
able.
1
Press this switch to operate
the voice command system.
The voice command system and its
list of commands can be operated.
(
Voice command system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
303
5-6. Radio operation
COROLLA HV_U
5
Audio
5-6.Radio operation
*
: If equipped
The radio operation screen can
be reached by the following
methods:
Select to display the audio
source selection screen.
Select to display the preset
stations screen. (
Select to display a list of
receivable stations. (
Select to display the radio
options screen. (
Select to display the sound
setting screen. (
Select to tune to preset sta-
tions/channels. (
Press to seek for stations in
the relevant program type.
Press and hold for continu-
ous seek.
Turn to step up/down fre-
quencies.
Turn to move up/down the
station. Also, the knob can be
used to enter selections on
the list screens by pressing it.
The radio automatically changes to
stereo reception when a stereo
broadcast is received.
Radio mode has a mix preset
function, which can store up to
36 stations (6 stations per page
x 6 pages) from any of the AM,
FM or SXM bands.
1
Tune in the desired station.
AM radio/FM radio/Siri-
usXM
®
Satellite
Radio(SXM)
*
Overview
Control screen
Control panel
Presetting a station
-------------------------------------------------------------------------------------------------------------------------------------------------------------
304
5-6. Radio operation
COROLLA HV_U
2
Select and hold “(Hold Edit)”.
To change the preset station
to a different one, select and
hold the preset station.
The number of preset radio stations
displayed on the screen can be
changed. (
1
Select “Station List”.
2
Select “AM”, “FM” or “SXM”.
Select the desired program genre
when the genre selection screen is
displayed.
3
Select the desired station.
■
Refreshing the station list
1
Select “Refresh”.
“Cancel Refresh”: Select to can-
cel the refresh.
“Source”: Select to change to
another audio source while
refreshing.
●
The audio/visual system sound is
muted during refresh operation.
●
In some situations, it may take
some time to update the station
list.
1
Select “Options”.
2
Select the desired item to be
set.
When “SXM Tune Start” is
turned on, the current song is
played from the beginning
when you select the channel.
Analog FM only: Select to
display RBDS text mes-
sages.
Select to scan for receivable
stations.
This audio/visual system is
equipped with Radio Broadcast
Data Systems (RBDS). RBDS
mode allows text messages to
be received from radio stations
that utilize RBDS transmitters.
When RBDS is on, the radio can
do the following functions.
• Only selecting stations of a
particular program type
• Displaying messages from
radio stations
• Searching for a stronger sig-
Selecting a station from
the list
Radio options
Radio Broadcast Data
System
-------------------------------------------------------------------------------------------------------------------------------------------------------------
305
5-6. Radio operation
COROLLA HV_U
5
Audio
nal station
RBDS features are available
only when listening to an FM
station that broadcasts RBDS
information and the “FM Info”
function is on. (
All SiriusXM services, including
satellite radio and data services,
plus streaming services, require
a subscription, sold separately
or as a package by Sirius XM
Radio Inc. (or in Canada, Sirius
XM Canada Inc.), after any trial
subscription which may be
included with your vehicle pur-
chase or lease. To subscribe
after your trial subscription, call
1-877-447-0011 (U.S.A.) or
1-877-438-9677 (Canada).
■
Important information
about your subscription
Your SiriusXM services will
automatically stop at the end of
your trial unless you decide to
subscribe. If you decide to con-
tinue service, the paid subscrip-
tion plan you choose will
automatically renew and you will
be charged the rate in effect at
that time and according to your
chosen payment method. Fees
and taxes apply. You may can-
cel at any time by calling
1-866-635-2349. See SiriusXM
Customer Agreement for com-
plete terms at www.siri-
usxm.com (U.S.A.) or
www.siriusxm.ca (Canada). All
fees and programming subject
to change. Traffic information
not available in all markets.
●
About SiriusXM Services
• Most in-car trials today include
SiriusXM’s best package — All
Access. It includes every channel
available on your radio, plus
streaming.
●
SiriusXM All Access Subscription
• Listen everywhere with All
Access. You get every channel
available in your ride, plus you can
listen on the app and online — so
you can enjoy the best SiriusXM
has to offer, anywhere life takes
you. It’s the only package that
gives you all of our premium pro-
gramming, including Howard
Stern, every NFL, MLB
®
and NBA
How to subscribe to Siri-
usXM Radio Services
NOTICE
●
It is prohibited to copy, decom-
pile, disassemble, reverse engi-
neer, hack, manipulate, or
otherwise make available any
technology or software incorpo-
rated in receivers compatible
with the SiriusXM Satellite
Radio System or that support
the SiriusXM website, the
streaming service or any of its
content. Furthermore, the
AMBE
®
voice compression soft-
ware included in this product is
protected by intellectual prop-
erty rights including patent
rights, copyrights, and trade
secrets of Digital Voice Sys-
tems, Inc.
●
Note: this applies to SiriusXM
Satellite Radio receivers only
and not SiriusXM Ready
devices.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
306
5-6. Radio operation
COROLLA HV_U
game, every NASCAR
®
race,
NHL
®
games, 24/7 talk channels
dedicated to the biggest leagues,
and more. You get all kinds of
commercial-free music, including
artist-dedicated channels and
more, plus sports, news, talk and
entertainment.
●
Radio operation
• Look for the Sirius, XM, SiriusXM,
Band, SAT, AUX, Radio or Source
button and you’re in. If you can’t
hear us, it’s easy to get started:
U.S.A.:
Locate your Radio ID by turning to
Channel 0. If you don’t see your
number there, go to siri-
usxm.com/activationhelp to find it.
Visit siriusxm.com/refresh or call
1-855-MYREFRESH (697-3373)
to send a refresh signal to your
radio.
Canada:
Locate your Radio ID by turning to
Channel 0.
Visit siriusxm.ca/refresh to send a
refresh signal to your radio or call
1-888-539-7474 for service.
Each SiriusXM tuner is identified
with a unique radio ID. The radio
ID is required when activating
an SiriusXM service or when
reporting a problem.
If “Ch 000” is selected using
the “TUNE SCROLL” knob,
the ID code, which is 8 alpha-
numeric characters, will be
displayed. If another channel
is selected, the ID code will no
longer be displayed. The
channel (000) alternates
between displaying the radio
ID and the specific radio
code.
When problems occur with the SiriusXM tuner, a message will
appear on the screen. Referring to the table below to identify the
problem, take the suggested corrective action.
Displaying the radio ID
Refer to the table below to identify the problem and take
the suggested corrective action
Message
Explanation
“Check
Antenna”
The SiriusXM antenna is not connected. Check whether the
SiriusXM antenna cable is attached securely. Contact your
Toyota dealer for assistance.
A short circuit occurs in the antenna or the surrounding
antenna cable. Contact your Toyota dealer for assistance.
“No Signal”
The SiriusXM signal is too weak at the current location. Wait
until your vehicle reaches a location with a stronger signal.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
307
5-6. Radio operation
COROLLA HV_U
5
Audio
“Chan
Unavailable”
The channel you selected is not broadcasting any program-
ming. Select another channel.
“Ch Unsub-
scribed”
The channel you selected is no longer available. Wait for
about 2 seconds until the radio returns to the previous chan-
nel or “Ch 001”. If it does not change automatically, select
another channel.
Message
Explanation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
308
5-6. Radio operation
COROLLA HV_U
●
Other applications can be acti-
vated while listening to internet
radio.
●
Some parts of applications can be
adjusted using the switches on the
steering wheel.
●
For additional information, refer to
https://www.toyota.com/
audio-multimedia or call
1-800-331-4331 in the United
States,
https://www.toyota.ca/connected
or call
1-888-869-6828 in Canada, and
http://www.toyotapr.com/
audio-multimedia or call
1-877-855-8377 in Puerto Rico.
1
Display the audio source
selection screen. (
2
Select the desired application
screen button.
The internet radio application
screen is displayed.
Perform operations accord-
ing to the displayed applica-
tion screen.
For the instrument panel
operation method:
If a compatible phone is
already registered, it will be
connected automatically.
Internet radio
One of Toyota apps Connect
features is the ability to lis-
ten to internet radio. In
order to use this service, a
compatible phone and the
system needs to be set up.
For details:
Listening to internet radio
-------------------------------------------------------------------------------------------------------------------------------------------------------------
309
5-7. Media operation
COROLLA HV_U
5
Audio
5-7.Media operation
The USB memory operation
screen can be reached by the
following methods:
Connecting a USB memory
(
When an Apple CarPlay/Android
Auto connection is established,
this function will be unavailable
*
.
*
: This function is not made avail-
able in some countries or areas.
USB audio
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display a song list
screen.
Select to display the play
mode selection screen.
Select to display the sound
setting screen. (
Select to set repeat playback.
(
Select to change the
file/track.
Select and hold to fast
rewind.
Select to play/pause.
Select to change the
file/track.
Select and hold to fast for-
ward.
Select to set random play-
back. (
Select to change the
folder/album.
Displays cover art
USB memory
WARNING
Do not operate the player’s con-
trols or connect the USB memory
while driving.
NOTICE
●
Do not leave your portable
player in the car. In particular,
high temperatures inside the
vehicle may damage the porta-
ble player.
●
Do not push down on or apply
unnecessary pressure to the
portable player while it is con-
nected as this may damage the
portable player or its terminal.
●
Do not insert foreign objects into
the port as this may damage the
portable player or its terminal.
Overview
Control screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
310
5-7. Media operation
COROLLA HV_U
Select to change the artist.
USB video
1
Select “Browse”.
2
Select “Videos”.
3
Select the desired folder and
file.
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display a song list
screen.
Select to display the play
mode selection screen.
Select to display the sound
setting screen. (
Select to change the file.
Select and hold to fast
rewind.
Select to play/pause.
Select to change the file.
Select and hold to fast for-
ward.
Select to display a full screen
image.
Select to change the folder.
Press to change the
file/track.
Press and hold to fast for-
ward/rewind.
Turn to change the file/track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
●
While the vehicle is being driven,
this function can only output
sound.
●
If tag information exists, the
file/folder names will be changed
to track/album names.
The file/track or folder/album
currently being listened to can
be repeated.
Select
.
●
Each time
is selected, the
mode changes as follows:
When random playback is off
File/track repeat
folder/album
repeat
off
When random playback is on
File/track repeat
off
Control panel
Repeating
-------------------------------------------------------------------------------------------------------------------------------------------------------------
311
5-7. Media operation
COROLLA HV_U
5
Audio
Files/tracks or folders/albums
can be automatically and ran-
domly selected.
Select
.
Each time
is selected, the
mode changes as follows:
Random (1 folder/album random)
folder/album random (all
folder/album random)
off
*
: This function is not made avail-
able in some countries or areas.
The iPod/iPhone(Apple Car-
Play) operation screen can be
reached by the following meth-
ods:
Connecting an iPod/iPhone
(
When an Android Auto connec-
tion is established, this function
will be unavailable.
*
*
: This function is not made avail-
able in some countries or areas.
An Apple CarPlay connection
is not established
Random order
iPod/iPhone (Apple
CarPlay
*
)
Overview
Control screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
312
5-7. Media operation
COROLLA HV_U
An Apple CarPlay connection
is established
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display a song list
screen.
Select to display the play
mode selection screen.
Select to display the sound
setting screen. (
Select to set repeat playback.
(
Select to change the track.
Select and hold to fast
rewind.
Select to play/pause.
Select to change the track.
Select and hold to fast for-
ward.
Select to set random play-
back. (
Displays cover art
Select to change the album.
Select to change the artist.
Select to change the playlist.
Select to display the audio
control screen of Apple Car-
Play.
Press to change the track.
Press and hold to fast for-
ward/rewind.
Turn to change the track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
●
Some functions may not be avail-
able depending on the type of
model.
●
When an iPod/iPhone is con-
nected using a genuine
iPod/iPhone cable, the
iPod/iPhone starts charging its
battery.
●
Depending on the iPod/iPhone,
the video sound may not be able
to be heard.
●
Depending on the iPod/iPhone
and the songs in the iPod/iPhone,
a cover art may be displayed. This
function can be changed to “On”
or “Off”. (
P.321) It may take time
to display the cover art, and the
iPod/iPhone may not be operated
while the cover art display is in
process.
●
When an iPod/iPhone is con-
nected and the audio source is
Control panel
-------------------------------------------------------------------------------------------------------------------------------------------------------------
313
5-7. Media operation
COROLLA HV_U
5
Audio
changed to iPod/iPhone mode,
the iPod/iPhone will resume play-
ing from the same point it was last
used.
●
Tracks selected by operating a
connected iPod/iPhone may not
be recognized or displayed prop-
erly.
●
The system may not function
properly if a conversion adapter is
used to connect a device.
The track currently being lis-
tened to can be repeated.
1
Select
.
●
Each time
is selected, the
mode changes as follows:
When shuffle is off (iPhone 5 or
later)
• Track repeat
album repeat
off
When shuffle is off (iPhone 4s or
earlier)
• Track repeat
off
When shuffle is on
• Track repeat
off
Tracks or albums can be auto-
matically and randomly
selected.
1
Select
.
●
Each time
is selected, the
mode changes as follows:
• Shuffle (1 album shuffle)
album
shuffle (all album shuffle)
off
Repeating
Random order
WARNING
Do not operate the player’s con-
trols or connect the iPod/iPhone
while driving.
NOTICE
●
Do not leave your portable
player in the vehicle. In particu-
lar, high temperatures inside the
vehicle may damage the porta-
ble player.
●
Do not push down on or apply
unnecessary pressure to the
portable player while it is con-
nected as this may damage the
portable player or its terminal.
●
Do not insert foreign objects into
the port as this may damage the
portable player or its terminal.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
314
5-7. Media operation
COROLLA HV_U
*
: This function is not made avail-
able in some countries or areas.
The Android Auto operation
screen can be reached by the
following methods:
Connecting an Android device
(
When an Apple CarPlay con-
nection is established, this func-
tion will be unavailable.
*
*
: This function is not made avail-
able in some countries or areas.
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display the sound
setting screen. (
Select to display the audio
control screen of Android
Auto.
Select to change the track.
Select to play/pause.
Select to change the track.
Displays cover art
Press to change the track.
Turn to change the track.
Android Auto
*
Overview
Control screen
Control panel
WARNING
Do not connect smartphone or
operate the controls while driving.
NOTICE
●
Do not leave your smartphone
in the vehicle. In particular, high
temperatures inside the vehicle
may damage the smartphone.
●
Do not push down on or apply
unnecessary pressure to the
smartphone while it is con-
nected as this may damage the
smartphone or its terminal.
●
Do not insert foreign objects into
the port as this may damage the
smartphone or its terminal.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
315
5-7. Media operation
COROLLA HV_U
5
Audio
●
Depending on the Bluetooth
®
device that is connected to the
system, the music may start play-
ing when selecting
while it is
paused. Conversely, the music
may pause when selecting
while it is playing.
●
In the following conditions, the
system may not function:
• The Bluetooth
®
device is turned
off.
• The Bluetooth
®
device is not con-
nected.
• The Bluetooth
®
device has a low
battery.
●
When using the Bluetooth
®
audio
and Wi-Fi
®
Hotspot functions at
the same time, the following prob-
lems may occur:
• It may take longer than normal to
connect to the Bluetooth
®
device.
• The sound may cut out.
●
It may take time to connect the
phone when Bluetooth
®
audio is
being played.
●
For operating the portable player,
see the instruction manual that
comes with it.
●
If the Bluetooth
®
device is discon-
nected due to poor reception from
the Bluetooth
®
network when the
power switch is in ACC or ON, the
system automatically reconnects
the portable player.
●
If the Bluetooth
®
device is discon-
nected on purpose, such as it was
turned off, this does not happen.
Reconnect the portable player
manually.
●
Bluetooth
®
device information is
registered when the Bluetooth
®
device is connected to the Blue-
tooth
®
audio system. When selling
or disposing of the vehicle,
remove the Bluetooth
®
audio
information from the system.
(
●
In some situations, sound output
via the Bluetooth
®
audio system
may be out of sync with the con-
nected device or output intermit-
tently.
Bluetooth
®
audio
The Bluetooth
®
audio sys-
tem enables users to enjoy
listening to music that is
played on a portable player
on the vehicle speakers via
wireless communication.
This audio/visual system
supports Bluetooth
®
, a wire-
less data system capable of
playing portable audio
music without cables. If
your device does not sup-
port Bluetooth
®
, the Blue-
tooth
®
audio system will not
function.
WARNING
●
Do not operate the player’s con-
trols or connect to the Blue-
tooth
®
audio system while
driving.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
316
5-7. Media operation
COROLLA HV_U
The Bluetooth
®
audio operation
screen can be reached by the
following methods:
Connecting a Bluetooth
®
audio
device (
Depending on the type of porta-
ble player connected, some
functions may not be available
and/or the screen may look dif-
ferently than shown in this man-
ual.
When an Apple CarPlay/Android
Auto connection is established,
Bluetooth
®
audio will be sus-
pended and become unavail-
able
*
.
*
: This function is not made avail-
able in some countries or areas.
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display a song list
screen.
Select to display the play
mode selection screen.
Select to display the portable
device connection screen.
(
Select to display the sound
setting screen. (
Select to set repeat playback.
(
Select to change the track.
Select and hold to fast
WARNING
●
Your audio unit is fitted with
Bluetooth
®
antennas. People
with implantable cardiac pace-
makers, cardiac resynchroniza-
tion therapy-pacemakers or
implantable cardioverter defibril-
lators should maintain a reason-
able distance between
themselves and the Bluetooth
®
antennas. The radio waves may
affect the operation of such
devices.
●
Before using Bluetooth
®
devices, users of any electrical
medical device other than
implantable cardiac pacemak-
ers, cardiac resynchronization
therapy-pacemakers or implant-
able cardioverter defibrillators
should consult the manufacturer
of the device for information
about its operation under the
influence of radio waves. Radio
waves could have unexpected
effects on the operation of such
medical devices.
NOTICE
Do not leave your portable player
in the vehicle. In particular, high
temperatures inside the vehicle
may damage the portable player.
Overview
Control screen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
317
5-7. Media operation
COROLLA HV_U
5
Audio
rewind.
Select to play/pause.
Select to change the track.
Select and hold to fast for-
ward.
Select to set random play-
back. (
Select to change the album.
Displays cover art
Press to change the track.
Press and hold to fast for-
ward/rewind.
Turn to change the track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
The track or album currently
being listened to can be
repeated.
Select
.
●
Each time
is selected, the
mode changes as follows:
When random playback is off
Track repeat
album repeat
off
When random playback is on
Track repeat
off
Tracks or albums can be auto-
matically and randomly
selected.
Select
.
Each time
is selected, the
mode changes as follows:
Random (1 album random)
album random (all album random)
off
To use the Bluetooth
®
audio
system, it is necessary to regis-
ter a Bluetooth
®
device with the
system.
Registering an additional
device
1
Display the Bluetooth
®
audio
control screen. (
2
Select “Connect”.
3
Select “Add Device”.
When another Bluetooth
®
device is
connected, a confirmation screen
will be displayed. To disconnect the
Bluetooth
®
device, select “Yes”.
4
Follow the steps in “Register-
ing a Bluetooth
®
phone for
Control panel
Repeating
Random order
Registering/Connecting a
Bluetooth
®
device
-------------------------------------------------------------------------------------------------------------------------------------------------------------
318
5-7. Media operation
COROLLA HV_U
the first time” from step
5
.
(
Selecting a registered device
1
Display the Bluetooth
®
audio
control screen. (
2
Select “Connect”.
3
Select the desired device to
be connected.
4
Check that a confirmation
screen is displayed when the
connection is complete.
If an error message is displayed,
follow the guidance on the screen
to try again.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
319
5-8. Audio/visual remote controls
COROLLA HV_U
5
Audio
5-8.Audio/visual remote controls
Some parts of the audio/visual
system can be adjusted using
the switches on the steering
wheel.
Volume control switch
“MODE” switch
*1
:If equipped
*2
:If cached radio is enabled, press-
ing and holding the “MODE”
switch pauses the broadcast.
(Press and hold again to play
back the cached radio program.)
*3
:When an Apple CarPlay is estab-
lished, this function will be
unavailable.
*4
:When an Android Auto is estab-
lished, this function will be
unavailable.
switch
Steering switches
Steering switch operation
Mode
Operation/function
All
Press: Volume
up/down
Press and hold
(0.8 sec. or more):
Volume up/down
continuously
Mode
Operation/function
AM/FM/
SXM
*1
Press: Change
audio modes
Press and hold
(0.8 sec. or more):
Mute
*2
(Press and
hold again to
resume the
sound.)
USB
*3, 4
,
iPod/iPhone
*4
,
Android
Auto
*3
, Blue-
tooth
®
audio
*3,
4
, APPS
*3, 4
Press: Change
audio modes
Press and hold
(0.8 sec. or more):
Pause (Press and
hold again to
resume the play
mode.)
Mode
Operation/function
AM/FM
Press: Preset
channel up/down
Press and hold
(0.8 sec. or more):
Seek up/down
Press and hold
(1.5 sec. or more):
Seek up/down con-
tinuously while the
switch is being
pressed
Mode
Operation/function
-------------------------------------------------------------------------------------------------------------------------------------------------------------
320
5-8. Audio/visual remote controls
COROLLA HV_U
*1
:If equipped
*2
:When an Apple CarPlay is estab-
lished, this function will be
unavailable.
*3
:When an Android Auto is estab-
lished, this function will be
unavailable.
In the APPS mode, some operation
may be done on the screen depend
on the selected APPS.
SXM
*1
Press: Preset
channel up/down
Press and hold
(0.8 sec. or more):
Seek for stations in
the relevant pro-
gram type/channel
category
Press and hold
(1.5 sec. or more):
Fast channel
up/down
USB
*2, 3
,
iPod/iPhone
*3
,
Bluetooth
®
audio
*2, 3
Press: Track/file
up/down
Press and hold
(0.8 sec. or more):
Fast for-
ward/rewind
Android Auto
*2
Press: Track
up/down
Mode
Operation/function
-------------------------------------------------------------------------------------------------------------------------------------------------------------
321
5-9. Audio settings
COROLLA HV_U
5
Audio
5-9.Audio settings
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Audio”.
4
Select the desired items to
be set.
Select to set the common
settings. (
Select to set the radio set-
tings. (
1
Display the audio settings
screen. (
2
Select “Common”.
3
Select the desired items to
be set.
Select to set the cover art
display on/off.
Select to prioritize the display
of information from the Gra-
cenote database.
Select to change the screen
size.
*
(
Select to display the image
quality adjustment screen.
*
(
*
: Only in USB video mode
1
Display the audio settings
screen. (
2
Select “Radio”.
3
Select the desired number of
preset radio stations dis-
played on the screen.
Setup
Detailed audio settings can
be programmed.
Displaying the audio set-
tings screen
Audio settings screen
Common settings
Radio settings
-------------------------------------------------------------------------------------------------------------------------------------------------------------
322
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5-10.Tips for operating the audio/visual system
The use of a cellular phone inside or
near the vehicle may cause a noise
from the speakers of the
audio/visual system which you are
listening to. However, this does not
indicate a malfunction.
Usually, a problem with radio
reception does not mean there
is a problem with the radio
it
is just the normal result of condi-
tions outside the vehicle.
For example, nearby buildings
and terrain can interfere with FM
reception. Power lines or phone
wires can interfere with AM sig-
nals. And of course, radio sig-
nals have a limited range. The
farther the vehicle is from a sta-
tion, the weaker its signal will
be. In addition, reception condi-
tions change constantly as the
vehicle moves.
Here are some common recep-
tion problems that may not indi-
cate a problem with the radio as
described.
■
FM
Fading and drifting stations:
Generally, the effective range of
FM is about 25 miles (40 km).
Once outside this range, you
may notice fading and drifting,
which increase with the distance
from the radio transmitter. They
are often accompanied by dis-
tortion.
Multi-path: FM signals are
reflective, making it possible for
2 signals to reach the vehicle’s
antenna at the same time. If this
happens, the signals will cancel
each other out, causing a
momentary flutter or loss of
reception.
Static and fluttering: These
occur when signals are blocked
by buildings, trees or other large
objects. Increasing the bass
level may reduce static and flut-
tering.
Station swapping: If the FM sig-
nal being listened to is inter-
rupted or weakened, and there
is another strong station nearby
on the FM band, the radio may
tune in the second station until
the original signal can be picked
up again.
■
AM
Fading: AM broadcasts are
reflected by the upper atmo-
sphere
especially at night.
These reflected signals can
interfere with those received
directly from the radio station,
causing the radio station to
sound alternately strong and
weak.
Operating information
NOTICE
To avoid damage to the
audio/visual system:
Be careful not to spill beverages
over the audio/visual system.
Radio
-------------------------------------------------------------------------------------------------------------------------------------------------------------
323
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5
Audio
Station interference: When a
reflected signal and a signal
received directly from a radio
station are very nearly the same
frequency, they can interfere
with each other, making it diffi-
cult to hear the broadcast.
Static: AM is easily affected by
external sources of electrical
noise, such as high tension
power lines, lightening or electri-
cal motors. This results in static.
■
SiriusXM
Cargo loaded on the roof lug-
gage carrier, especially metal
objects, may adversely affect
the reception of SiriusXM Sat-
ellite Radio.
Alternation or modifications
carried out without appropri-
ate authorization may invali-
date the user’s right to
operate the equipment.
■
Certification
Use of the Made for Apple
badge means that an acces-
sory has been designed to
connect specifically to the
Apple product(s) identified in
the badge, and has been cer-
tified by the developer to meet
Apple performance stan-
dards. Apple is not responsi-
ble for the operation of this
device or its compliance with
safety and regulatory stan-
dards. Please note that the
use of this accessory with an
Apple product may affect
wireless performance.
iPhone
®
, iPod
®
, iPod clas-
sic
®
, iPod nano
®
, iPod
touch
®
, and Lightning
®
are
trademarks of Apple Inc., reg-
istered in the U.S. and other
countries.
■
Compatible models
Made for
• iPhone X
• iPhone 8
• iPhone 8 Plus
• iPhone 7
• iPhone 7 Plus
• iPhone SE
• iPhone 6s
• iPhone 6s Plus
iPod
-------------------------------------------------------------------------------------------------------------------------------------------------------------
324
5-10. Tips for operating the audio/visual system
COROLLA HV_U
• iPhone 6
• iPhone 6 Plus
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th generation)
• iPod touch (5th generation)
●
This system only supports audio
playback.
●
Depending on difference between
models or software versions etc.,
some models might be incompati-
ble with this system.
This device supports high-reso-
lution sound sources.
The definition of high-resolution
is based on the standards of
groups such as the CTA (Con-
sumer Technology Association).
Supported formats and play-
able media are as follows.
■
Supported formats
WAV, FLAC, ALAC, OGG Vorbis
■
Playable media
USB memory
*
: USB video only
High-resolution sound
source
File information
Compatible USB devices
USB communi-
cation formats
USB 2.0 HS (480
Mbps)
File formats
FAT 16/32
Correspon-
dence class
Mass storage
class
Compatible audio format
Compatible compressed files
Item
USB
Compatible file
format
MP3/WMA/AAC
WAV(LPCM)/FL
AC/ALAC/OGG
Vorbis
MP4/AVI/WMV
Compatible file
format (video)
*
MP4/AVI/WMV
Folders in the
device
Maximum
3000
Files in the
device
Maximum
9999
Files per folder
Maximum
255
Corresponding sampling fre-
quency
File type
Frequency (kHz)
MP3 files:
MPEG 1 LAYER
3
32/44.1/48
MP3 files:
MPEG 2 LSF
LAYER 3
16/22.05/24
-------------------------------------------------------------------------------------------------------------------------------------------------------------
325
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5
Audio
*1
:Only compatible with Windows
Media Audio Standard
*2
:Sound source of 48kHz or more
is down-converted to
48kHz/24bit.
*1
:Variable Bit Rate (VBR) compati-
ble
*2
:Only compatible with Windows
Media Audio Standard
MP3 (MPEG Audio Layer 3),
WMA (Windows Media Audio)
WMA files:
Ver. 7, 8, 9
*1
(9.1/9.2)
32/44.1/48
AAC files:
MPEG4/AAC-LC
11.025/12/16/
22.05/24/32/
44.1/48
WAV (LPCM)
files
*2
8/11.025/12/16/
22.05/24/32/
44.1/48/88.2/
96/176.4/192
FLAC
*2
8/11.025/12/16/
22.05/24/32/
44.1/48/88.2/
96/176.4/192
ALAC
*2
8/11.025/12/16/
22.05/24/32/
44.1/48/64/
88.2/96
OGG Vorbis
*2
8/11.025/16/
22.05/32/44.1/
48
Corresponding bit rates
*1
File type
Bit rate (kbps)
MP3 files:
MPEG 1 LAYER
3
32 - 320
MP3 files:
MPEG 2 LSF
LAYER 3
8 - 160
File type
Frequency (kHz)
WMA files: Ver.
7, 8
CBR 48 - 192
WMA files:
Ver. 9
*2
(9.1/9.2)
CBR 48 - 320
AAC files:
MPEG4/AAC-LC
8 - 320
OGG Vorbis
32-500
File type
Quantization bit
rate (bit)
WAV (LPCM)
files
16/24
FLAC
ALAC
Compatible channel modes
File type
Channel mode
MP3 files
Stereo, joint ste-
reo, dual chan-
nel and
monaural
WMA files
2ch
AAC files
1ch, 2ch (Dual
channel is not
supported)
WAV (LPCM)/
FLAC/ALAC/
OGG Vorbis
2ch
File type
Bit rate (kbps)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
326
5-10. Tips for operating the audio/visual system
COROLLA HV_U
and AAC (Advanced Audio
Coding) are audio compres-
sion standards.
This system can play
MP3/WMA/AAC files on USB
memory.
MP4, WMV and AVI files can
use the following resolutions:
128x96, 160x120, 176x144
(QCIF), 320x240 (QVGA),
352x240 (SIF), 352x288
(CIF), 640x480 (VGA),
720x480 (NTSC), 720x576
(PAL)
When naming an
MP3/WMA/AAC file, add an
appropriate file extension
(.mp3/.wma/.m4a).
This system plays back files
with .mp3/.wma/.m4a file
extensions as
MP3/WMA/AAC files respec-
tively. To prevent noise and
playback errors, use the
appropriate file extension.
MP3 files are compatible with
the ID3 Tag Ver. 1.0, Ver. 1.1,
Ver. 2.2 and Ver. 2.3 formats.
This system cannot display
disc title, track title and artist
name in other formats.
WMA/AAC files can contain a
WMA/AAC tag that is used in
the same way as an ID3 tag.
WMA/AAC tags carry infor-
mation such as track title and
artist name.
The emphasis function is
available only when playing
MP3 files.
This system can play back
AAC files encoded by iTunes.
The sound quality of
MP3/WMA files generally
improves with higher bit rates.
m3u playlists are not compati-
ble with the audio player.
MP3i (MP3 interactive) and
MP3PRO formats are not
compatible with the audio
player.
The player is compatible with
VBR (Variable Bit Rate).
When playing back files
recorded as VBR (Variable Bit
Rate) files, the play time will
not be correctly displayed if
the fast forward or reverse
operations are used.
It is not possible to check fold-
ers that do not include
MP3/WMA/AAC files.
MP3/WMA/AAC files in fold-
ers up to 8 levels deep can be
played. However, the start of
playback may be delayed
when using USB memory
containing numerous levels of
folders. For this reason, we
recommend creating USB
memory with no more than 2
levels of folders.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
327
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5
Audio
The play order of the USB
memory with the structure
shown above is as follows:
The order changes depending
on the personal computer and
MP3/WMA/AAC encoding
software you use.
Compatible video format
Format
Codec
MPEG-4
Video codec:
H.264/MPEG-4
AVC
MPEG4
Audio codec:
AAC
MP3
Corresponding
screen size:
MAX
1920
1080
Corresponding
frame rate:
MAX 60i/30p
-------------------------------------------------------------------------------------------------------------------------------------------------------------
328
5-10. Tips for operating the audio/visual system
COROLLA HV_U
■
ID3 tag
This is a method of embedding
track-related information in an
MP3 file. This embedded infor-
mation can include the track
number, track title, the artist’s
name, the album title, the music
genre, the year of production,
comments, cover art and other
data. The contents can be freely
edited using software with ID3
tag editing functions. Although
the tags are restricted to a num-
ber of characters, the informa-
tion can be viewed when the
track is played back.
■
WMA tag
WMA files can contain a WMA
tag that is used in the same way
as an ID3 tag. WMA tags carry
information such as track title
and artist name.
■
MP3
MP3 is an audio compression
standard determined by a work-
ing group (MPEG) of the ISO
(International Standard Organi-
zation). MP3 compresses audio
data to about 1/10 the size of
that on conventional discs.
■
WMA
WMA (Windows Media Audio)
is an audio compression for-
mat developed by Microsoft
®
.
It compresses files into a size
smaller than that of MP3 files.
The decoding formats for
WMA files are Ver. 7, 8 and 9.
This product includes technol-
ogy owned by Microsoft Cor-
AVI Container
Video codec:
H.264/MPEG-4
AVC
MPEG4
WMV9
WMV9
Advanced pro-
file
Audio codec:
AAC
MP3
WMA9.2
(7,8,9.1,9.2)
Corresponding
screen size:
MAX
1920
1080
Corresponding
frame rate:
MAX 60i/30p
Windows Media
Video
Video codec:
WMV9
WMV9
Advanced pro-
file
Audio codec:
WMA9.2
(7,8,9.1,9.2)
Corresponding
screen size:
MAX
1920
1080
Corresponding
frame rate:
MAX 60i/30p
Terms
Format
Codec
-------------------------------------------------------------------------------------------------------------------------------------------------------------
329
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5
Audio
poration and cannot be used
or distributed without a
license from Microsoft Licens-
ing, Inc.
■
AAC
AAC is short for Advanced
Audio Coding and refers to an
audio compression technology
standard used with MPEG2 and
MPEG4.
■
USB
■
iPod
■
Bluetooth
®
audio
If the malfunction is not rectified:
Take your vehicle to your Toyota
dealer.
Error messages
Message
Explanation
“USB Error”
This indicates a
problem in the
USB memory or
its connection.
“No music files
found.”
This indicates
that no
MP3/WMA/AAC
files are included
in the USB mem-
ory.
“No video files
found.”
This indicates
that no video
files are included
in the USB mem-
ory.
Message
Explanation
“iPod Error”
This indicates a
problem in the
iPod or its con-
nection.
“No music files
found.”
This indicates
that there is no
music data in the
iPod.
“Please check
the iPod firm-
ware version.”
This indicates
that the software
version is not
compatible. Per-
form the iPod
firmware
updates and try
again.
“Unable to
authorize the
iPod.”
This indicates
that it failed to
authorize the
iPod.
Please check
your iPod.
Message
Explanation
“Music tracks not
supported.
Please check
your portable
player.”
This indicates a
problem in the
Bluetooth
®
device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
330
5-10. Tips for operating the audio/visual system
COROLLA HV_U
■
Except for vehicles sold in Canada
Certification
-------------------------------------------------------------------------------------------------------------------------------------------------------------
331
5-10. Tips for operating the audio/visual system
COROLLA HV_U
5
Audio
■
For vehicles sold in Canada
-------------------------------------------------------------------------------------------------------------------------------------------------------------
332
5-10. Tips for operating the audio/visual system
COROLLA HV_U
■
Gracenote
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст