Volvo V90 Cross Country (2019 year). Instruction — part 4
DISPLAYS AND VOICE CONTROL
* Option/accessory.
82
Instruments and controls in left-
hand drive vehicles
The overviews show the location of the vehicle's
displays and controls.
Steering wheel and dashboard
Parking lights, daytime running lights, low
beams, high beams, turn signals, front fog
lights/cornering illumination*, rear fog light,
trip computer reset
Steering wheel paddles for manual shifting*
Head-up display*
Instrument panel
Wipers and washers, rain sensor*
Right-side steering wheel keypad
Steering wheel adjustment
Horn
Left-side steering wheel keypad
Hood open
Display lighting, tailgate unlock/open*/
close*, halogen headlight height adjustment
Ceiling console
Front reading lights and courtesy lighting
Panoramic roof*
Ceiling console display ON CALL button
HomeLink
®
*
Center and tunnel console
Center display
Hazard warning flashers, defrosting, media
Gear selector
Start knob
Drive modes*
Parking brake
Auto-hold brakes
Driver's door
DISPLAYS AND VOICE CONTROL
* Option/accessory.
83
Memory for power front seat settings*, door
mirrors and head-up display*
Central locking
Power windows, door mirrors, electric child
safety locks*
Controls for front seat
Related information
•
•
Adjusting the power* front seats (p. 189)
•
Adjusting the steering wheel (p. 201)
•
Lighting panel and controls (p. 154)
•
•
•
Center display overview (p. 111)
•
DISPLAYS AND VOICE CONTROL
* Option/accessory.
84
Instrument panel
The instrument panel displays information rela-
ted to the vehicle and driving.
The instrument panel contains gauges, indicators
and monitoring and warning symbols. What is
shown in the instrument panel varies depending
on the equipment, settings and functions cur-
rently active.
The instrument panel is activated as soon as a
door is opened, i.e. in ignition mode 0. The panel
will power down after a short period of time if it is
not used. To reactivate it, do one of the following:
•
Depress the brake pedal.
•
Activate ignition mode I.
•
Open one of the doors.
The instrument panel is available in two versions:
12"* and 8".
WARNING
If the instrument panel turns off, does not
activate when the ignition is switched on, or
part/all of the panel cannot be read, do not
drive the vehicle. Consult a workshop immedi-
ately. Volvo recommends an authorized Volvo
workshop.
WARNING
If the instrument panel is not functioning
properly, information about brakes, airbags or
other safety-related systems may not be dis-
played. The driver will then not be able to
check the status of the vehicle systems or
receive relevant warnings and information.
Instrument panel 12"*
Location in the instrument panel:
Left side
In the center
Right side
Speedometer
Indicator and warning symbols
Tachometer/ECO gauge
A
Trip odometer
Ambient temperature sensor
Gear indicator
Odometer
B
Clock
Drive Mode
Cruise control/speed limiter information
Message (also graphics in some cases)
Fuel gauge
Road sign information*
Door and seat belt status
Start/Stop function's status
–
Media player
Distance to empty tank
DISPLAYS AND VOICE CONTROL
}}
* Option/accessory.
85
Left side
In the center
Right side
–
Navigation system map
Current fuel consumption
–
Phone
App menu (activated using steering wheel keypad)
–
Voice Control
–
–
Compass
A
–
A
Depends on selected drive mode.
B
Total distance.
Instrument panel 8"
Location in the instrument panel:
Left side
In the center
Right side
Fuel gauge
Speedometer
Media player
Drive Mode
Road sign information*
Phone
||
DISPLAYS AND VOICE CONTROL
86
Left side
In the center
Right side
Gear indicator
Cruise control/speed limiter information
Navigation information
Tachometer/ECO gauge
A
Door and seat belt status
Clock
Distance to empty tank
Start/Stopp function's status
App menu (activated using steering wheel keypad)
Ambient temperature sensor
–
Current fuel consumption
Indicator and warning symbols
–
Odometer
B
–
–
Trip odometer
–
–
Indicator and warning symbols
–
–
Voice Control
–
–
Engine temperature gauge
–
–
Message (also graphics in some cases)
–
–
Compass
A
A
Depends on selected drive mode.
B
Total distance.
Dynamic symbol
Dynamic symbol in basic mode.
In the center of the instrument panel is a dynamic
symbol that changes appearance according to
the type of message displayed. The severity of
the control or warning symbol is indicated by an
amber or red marking around the symbol. An ani-
mation may be used to change the symbol into a
larger image in order to graphically depict the
location of a problem or to clarify information.
DISPLAYS AND VOICE CONTROL
87
Example with indicator symbol.
Related information
•
Instrument panel settings (p. 88)
•
Warning symbols in the instrument panel
(p. 97)
•
Indicator symbols in the instrument panel
(p. 95)
•
•
Messages in the instrument panel (p. 106)
•
DISPLAYS AND VOICE CONTROL
* Option/accessory.
88
Instrument panel settings
Display settings for the instrument panel can be
set via the instrument panel's app menu and via
the center display's Settings menu.
Settings via instrument panel's app
menu
The illustration is generic – layout may vary.
The app menu will open and can be controlled
using the right-side steering wheel keypad.
The app menu can be used to set what informa-
tion will be displayed in the instrument panel:
•
trip computer
•
media player
•
phone
•
navigation system.
Settings via center display
Selecting type of information
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Displays
Driver Display
Information
.
3. Select a background:
•
Show no information in the
background
•
Show information for current playing
media
•
Show navigation even if no route is
set
1
.
Select theme
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Displays
Display
Themes
3. Select a theme (appearance) for the instru-
ment panel:
•
Glass
•
Minimalistic
•
Performance
•
Chrome Rings
.
Select language
1. Tap
Settings
in the center display's Top
view.
2. Tap
System
System Languages and
Units
System Language
to select lan-
guage.
> A change made here will affect the lan-
guage in all displays.
The settings are personal and saved automati-
cally in the active driver profile.
Related information
•
•
Handling the App menu in the instrument
panel (p. 105)
•
Changing settings in the center display's Top
view (p. 134)
1
The map is only shown with the 12" instrument panel*. With the 8" instrument panel, only guidance is shown.
DISPLAYS AND VOICE CONTROL
}}
89
Fuel gauge
The fuel gauge in the instrument panel shows
the fuel level in the tank.
Fuel gauge in 12" instrument panel:
The beige area in the fuel gauge indicates the
amount of fuel left in the tank.
When the fuel level is low and it is time to refuel,
the fuel pump symbol will illuminate with an
amber-colored light. The trip computer also indi-
cates the approximate distance driven on the fuel
remaining in the tank.
Fuel gauge in 8" instrument panel:
The bars in the fuel gauge indicate the amount of
fuel left in the tank.
When the fuel level is low and it is time to refuel,
the fuel pump symbol will illuminate with an
amber-colored light. The trip computer also indi-
cates the approximate distance driven on the fuel
remaining in the tank. When the fuel level is criti-
cally low, only an amber bar will be displayed.
Refuel as soon as possible.
Related information
•
•
•
Trip computer
The vehicle's trip computer registers data while
driving such as mileage, fuel consumption and
average speed.
To help promote fuel-efficient driving, data is
recorded on both current and average fuel con-
sumption. Data from the trip computer can be
displayed in the instrument panel.
||
DISPLAYS AND VOICE CONTROL
* Option/accessory.
90
12" instrument panel*.
8-inch instrument panel.
The trip computer includes the following gauges:
•
Trip odometer
•
Odometer
•
Current fuel consumption
•
Distance to empty tank
•
Tourist - alternative speedometer
Unit standards for distance, speed, etc. can be
changed via system settings in the center display.
Trip odometer
There are two trip odometers: TM and TA.
TM can be reset manually and TA is reset auto-
matically if the vehicle is not used for four hours.
During a drive, the trip odometer registers data
on:
•
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
The readings since the trip odometer's last reset
are displayed.
Odometer
The odometer records the vehicle's total mileage.
This reading cannot be reset.
Current fuel consumption
This gauge shows the vehicle's fuel consumption
at that moment. The reading is updated about
once a second.
Distance to empty tank
The trip computer calculates the distance that
can be driven on the fuel remaining in the tank.
This calculation is based on average fuel con-
sumption during the last 30 km (20 miles) and
the amount of fuel remaining in the tank.
When the gauge displays "----", there is not
enough fuel remaining to calculate the remaining
mileage. Refuel as soon as possible.
This may vary if your driving style changes.
An economical driving style will generally
increase how far you can drive on a certain
amount of fuel.
Tourist - alternative speedometer
The alternative digital speedometer makes it eas-
ier to drive in countries where speed limit signs
are shown in a different measurement unit than
the one shown in the vehicle's gauges.
When used, the digital speed is displayed in the
opposite unit to that shown in the analog speed-
ometer. If mph is used in the analog speedome-
ter, the equivalent speed in km/h will be shown
in the digital speedometer.
Related information
•
Displaying trip data in the instrument panel
(p. 91)
•
Resetting the trip odometer (p. 92)
•
DISPLAYS AND VOICE CONTROL
}}
91
•
•
Changing system units of measurement
(p. 134)
Displaying trip data in the
instrument panel
Data recorded and calculated by the trip com-
puter can be displayed on the instrument panel.
This data is stored in a trip computer app. You
can choose which information the instrument
panel will display in the app menu.
Open and navigate in the app menu
2
using the right-
hand steering wheel keypad.
App menu
Left/right
Up/down
Confirm
1. Open the app menu in the instrument panel
by pressing (1).
(The App menu cannot be opened while
there is an unacknowledged message in the
instrument panel. The message must be con-
firmed before the App menu can be opened.)
2. Navigate to the trip computer app by moving
left or right using (2).
> The top four menu rows show measured
values for trip odometer TM. The next four
menu rows show measured values for trip
odometer TA. Scroll up or down in the list
using (3).
3. Scroll down to the option buttons to choose
which information to show in the instrument
panel:
•
Distance to empty tank
•
Odometer
•
Mileage for trip odometer TM, TA or no
display of mileage
•
Current fuel consumption, average fuel
consumption for TM or TA, or no display
of fuel consumption
•
Tourist (alternative speedometer).
Select or clear a selection using the O but-
ton (4). The change will apply immediately.
2
The illustration is generic - details may vary according to vehicle model.
||
DISPLAYS AND VOICE CONTROL
92
Related information
•
•
Resetting the trip odometer (p. 92)
Resetting the trip odometer
Resetting the trip odometer using the left-side
steering wheel lever.
–
Reset all information in trip odometer TM (i.e.
mileage, average fuel consumption, average
speed and driving time) by pressing and
holding the RESET button on the left-hand
steering wheel lever.
Tapping the RESET button only resets the
distance driven.
The TA trip odometer can not be manually reset.
It resets automatically if the vehicle is not used
for four hours or more.
Related information
•
Displaying trip statistics in the
center display
Trip computer statistics can be displayed graphi-
cally in the center display, providing an overview
that facilitates more fuel-efficient driving.
Open the
Driver performance
app in the App view to display
trip statistics.
Each bar in the graph repre-
sents a driving distance of 1
kilometers, 10 kilometers or
100 kilometers (or miles). The bars are added
from the right as you drive. The bar at the far right
shows the data for the current trip.
Average fuel consumption and total driving time
are calculated from the most recent reset of the
trip statistics.
DISPLAYS AND VOICE CONTROL
93
Trip computer statistics
3
.
Related information
•
Trip statistics settings (p. 93)
•
Trip statistics settings
Trip statistics settings can be reset or adjusted.
1. Open the
Driver performance
app in the
App view to display trip statistics.
2. Tap
Preferences
to
•
change the graph scale. Select 1, 10 or
100 km/miles for the bar.
•
reset data after each trip. Performed when
the vehicle remains stationary for more
than 4 hours.
•
reset data for current trip.
Trip statistics, calculated average consump-
tion, and total driving time are always reset
simultaneously.
Unit standards for distance, speed, etc. can be
changed via system settings in the center display.
Related information
•
Displaying trip statistics in the center display
(p. 92)
•
•
Resetting the trip odometer (p. 92)
3
The illustration is generic - details may vary according to vehicle model.
DISPLAYS AND VOICE CONTROL
94
Date and time
The clock is displayed in both the instrument
panel and the center display.
Location of clock
Location of clock in 12" and 8" instrument panels.
In the center display, the clock is located at the
top right of the status bar.
Certain messages and other information may
obscure the clock in the instrument panel.
Time and date settings
–
Select
Settings
System
Date and
Time
in the center display's Top view to
change settings for time and date format.
Adjust the time and date by tapping the up or
down arrows on the touchscreen.
Automatic time for vehicles with GPS
When the vehicle is equipped with a navigation
system,
Auto Time
is also available. The time
zone will then be automatically set to the vehi-
cle's location. In some navigation systems, the
current location must also be set to determine
the correct time zone. If
Auto Time
is not
selected, the time and date can be adjusted
using the up and down arrows on the
touchscreen.
Daylight savings time
In some countries, an automatic change to day-
light savings time can be selected by activating
Auto
. For other countries, daylight savings time
can be changed by selecting
On
or
Off
.
Related information
•
•
Changing settings in the center display's Top
view (p. 134)
Ambient temperature sensor
The ambient temperature is shown in the instru-
ment panel.
The sensor detects the temperature outside the
vehicle.
Location of the ambient temperature sensor in 12" and
8" instrument panels.
If the vehicle has been stationary, the sensor
reading may be higher than the actual tempera-
ture.
When the ambient temperature is
between –5 °C and +2 °C (23
°F and
36
°F), a snowflake symbol will be dis-
played in the instrument panel as a
warning for possible slippery conditions.
The snowflake symbol is also temporarily lit in the
head-up display if the vehicle is equipped with
one.
DISPLAYS AND VOICE CONTROL
}}
95
Change the measurement standard for the tem-
perature sensor etc. via system settings in the
center display's Top view.
Related information
•
•
Changing system units of measurement
(p. 134)
Indicator symbols in the instrument
panel
The indicator symbols alert the driver that a func-
tion has been activated, that a system is running,
or that a fault or error may have occurred.
Symbol
Meaning
Information, see the message in
the display
The information symbol illuminates
and a message is displayed in the
instrument panel if one of the vehi-
cle's systems requires the driver's
attention. The information symbol
may also illuminate in combination
with other symbols.
A
B
Fault in brake system
This symbol illuminates if there is a
problem with the parking brake.
Symbol
Meaning
A
B
Fault in ABS system
If this symbol is illuminated, the
ABS system is malfunctioning. The
vehicle's regular brakes will still
work, but without the ABS function.
A
B
Auto-brake on
This symbol illuminates when the
function is activated and the brakes
or parking brakes are being used.
The brakes hold the vehicle at a
standstill after it has stopped.
||
DISPLAYS AND VOICE CONTROL
96
Symbol
Meaning
Tire pressure system
This symbol illuminates to indicate
low tire pressure. If there is a fault
in the tire pressure system, the
symbol will first flash for approxi-
mately 1 minute and then glow
steadily. This may occur if the sys-
tem cannot detect or alert the
driver of low tire pressure as
intended.
Emission control system
If this symbol illuminates after star-
ting the engine, it could indicate a
fault in the vehicle's emission con-
trol system. Have the vehicle
checked by a workshop. Volvo rec-
ommends contacting an authorized
Volvo workshop.
Left/right turn signals
The symbol will flash when the turn
signals are in use.
Symbol
Meaning
Parking lights
This symbol illuminates when the
parking lights are on.
Fault in headlight system
This symbol illuminates if a fault
has been detected in the ABL
(Active Bending Lights) function or
another fault in the headlight sys-
tem.
Active high beams on
This symbol lights up in blue when
the active high beams are on.
Active high beams off
This symbol lights up in white when
the active high beams are off.
High beams on
This symbol illuminates when the
high beams are on or flashed.
Active high beams on
This symbol lights up in blue when
the active high beams are on. Park-
ing lights are on.
Symbol
Meaning
Active high beams off
This symbol lights up in white when
the active high beams are off.
Parking lights are on.
High beams on
This symbol illuminates when the
high beams and parking lights are
on.
Front fog lights on
This symbol illuminates when the
front fog lights are on.
Rear fog light on
This symbol illuminates when the
rear fog light is on.
Rain sensor on
This symbol illuminates when the
rain sensor is on.
Preconditioning on
This symbol illuminates when the
engine block/passenger compart-
ment heater or air conditioning are
preconditioning the vehicle.
DISPLAYS AND VOICE CONTROL
}}
97
Symbol
Meaning
Stability system
This symbol flashes when the sta-
bility system is actively working to
stabilize the vehicle. If the symbol
glows steadily, there is a fault in
the system.
Stability system, Sport mode
This symbol illuminates when Sport
mode is activated. Sport mode
offers a more active driving experi-
ence. If the system detects that
accelerator pedal, steering wheel
and cornering movements are
more active than in normal driving,
it allows a certain level of con-
trolled lateral movement of the rear
wheels before intervening and sta-
bilizing the vehicle.
Symbol
Meaning
Lane Keeping Aid
White symbol: Lane Keeping Aid is
on and lane marker lines are
detected.
Gray symbol: Lane Keeping Aid is
on but no lane marker lines are
detected.
Amber symbol: Lane Keeping Aid
is alerting/intervening.
Lane Keeping Aid and rain sen-
sor
White symbol: Lane Keeping Aid is
on and lane marker lines are
detected. The rain sensor is on.
Gray symbol: Lane Keeping Aid is
on but no lane marker lines are
detected. The rain sensor is on.
A
Canadian models.
B
US models.
Related information
•
•
Warning symbols in the instrument panel
(p. 97)
Warning symbols in the instrument
panel
The warning symbols alert the driver that an
important function is activated or that a serious
fault or error has occurred.
Symbol
Meaning
WARNING
The red warning symbol illuminates
to indicate that a fault has been
detected that could affect safety
and/or driveability. An explanatory
message will be simultaneously
displayed in the instrument panel.
The warning symbol may also illu-
minate in combination with other
symbols.
Seat belt reminder
This symbol will glow steadily or
flash if the driver or front seat pas-
senger has not fastened their seat
belt or if anyone in the rear seat
has removed their seat belt.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст