Volvo S90 Recharge Plug-in Hybrid (2021 year). Manual in english — page 17
||
DRIVER SUPPORT
* Option/accessory.
298
Some speed limits only apply
after a certain distance or at a
certain time of day. The driv-
er's attention is drawn to this
fact by means of a symbol for
an additional sign below the
speed symbol. The additional
symbol in the driver display will show either
“DIST” or “TIME”.
Sign for "School" and "Children at
play"
If a warning sign for "School"
or "Children at play" is
included in the satellite navi-
gator's map data
19
, the driver
display shows a sign of this
type.
Related information
•
•
Limitations of Road Sign Information
Road Sign Information and Sensus
Navigation
*
If the car is equipped with Sensus Navigation
*
,
speed information is read from the navigation
unit in the following cases:
•
On detection of signs that indirectly indi-
cate a speed limit, such as motorway, dual
carriageway and city limit signs.
•
If a previously detected speed sign is
assumed not to apply any longer, but no
new sign has been detected.
In certain markets, the Road Sign Informa-
tion function
*
is only available in combina-
tion with Sensus Navigation
*
.
If a downloaded third-party app is used for
navigation then there is no support for
speed-related information.
Related information
•
Warning for speed limitation and
speed camera from road sign
information
*
Road sign information (RSI
20
) includes sub-
functions that can warn the driver if a speed
limit has been exceeded or in connection with
speed cameras.
Examples of information on speed camera and speed
limit in the driver display
Warning for speed limit
The speed warning is given
by the driver display symbol
21
showing the applicable maxi-
mum permitted speed tem-
porarily flashing when this
speed is exceeded.
19
Only in cars with Sensus Navigation
*
.
20
Road Sign Information
21
Road signs are customised for each market – the one shown here is just an example.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
299
A speed warning is always given if the speed
limit is exceeded in connection with speed
camera information.
Speed Limit Warning
warns the driver when
the applicable speed limit or stored maximum
speed is exceeded – this warning is repeated
once after approx. 1 minute within the same
speed limit area unless the driver reduces the
speed.
A new warning for exceeding the speed limit,
including a reminder, will be given only when
the car reaches a new/different speed limit
area.
To get an acoustic warning if you exceed
the required speed, the
Speed Limit
Warning
function must be activated and
the
Road Sign Audio Warning
subfunc-
tion must be set to
On
. An acoustic warn-
ing is then given if the car's speed exceeds
the speed indicated by the Road Sign
Information function in the driver display.
Warning for speed camera
A car equipped with road
sign information and Sensus
Navigation can provide infor-
mation on an upcoming
speed camera in the driver
display
22
.
If the car exceeds a detected speed limit with
the
Speed Limit Warning
function activated,
a speed warning is given when the car
approaches a speed camera, provided that the
navigation map for the area in question con-
tains information on speed cameras.
An option is available to receive an acous-
tic warning for speed cameras independ-
ently of the car's speed and exceeded
speed limit, even if the
Road Sign Audio
Warning
function is deactivated.
Related information
•
•
Activating or deactivating warnings from
road sign information
•
Limitations of Road Sign Information
Activating or deactivating
warnings from road sign
information
*
The subfunction
Speed Limit Warning
for
Road Sign Information (RSI
23
) is optional –
the driver can choose to activate or deacti-
vate this subfunction.
Activating speed warning
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the centre
display's top view.
2. Select
Speed Limit Warning
.
> The function is activated and a speed
limit selector appears.
Adjust the limit for Speed Warning
The driver can select to receive a warning at a
higher speed than the signed speed.
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the centre
display's top view.
2. Select
Speed Limit Warning
.
> The function is activated and a speed
limit selector appears.
22
Information on speed cameras on the navigation map is not available for all markets/areas.
23
Road Sign Information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
300
3. Adjust the limit for Speed Warning by
pressing the up/down arrows on the
screen.
Note that the function does
not give any consideration to
selected limit adjustment
when the driver display
shows the speed camera
symbol.
Activating acoustic warning in
connection with speed warning
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the centre
display's top view.
2. Select/deselect
Road Sign Audio
Warning
to activate/switch off the acous-
tic warning.
With the
Road Sign Audio Warning
function
activated, the driver is also warned when driv-
ing towards one-way traffic/no-entry entrance.
Activate speed camera warning
If the car is fitted with Sensus Navigation
*
and
map data contains information on speed cam-
eras, the driver can opt to receive an audible
warning when approaching a speed camera.
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the centre
display's top view.
2. Select/deselect
Speed Camera Audio
Warning
to activate/switch off the audi-
ble speed camera warning.
Related information
•
•
Warning for speed limitation and speed
camera from road sign information
•
Limitations of Road Sign Information
Limitations of Road Sign
Information
*
The Road Sign Information (RSI
24
) function
may have limitations in certain situations.
Examples of what can reduce the function are
as follows:
•
Faded signs
•
Signs positioned on bends
•
Rotated or damaged signs
•
Signs positioned high above the roadway
•
Fully/partially obscured or poorly posi-
tioned signs
•
Signs completely or partly covered with
frost, snow and/or dirt
•
Digital road maps
25
are out-of-date, inac-
curate or have no speed information
26
In certain markets, the Road Sign Informa-
tion function
*
is only available in combina-
tion with Sensus Navigation
*
.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
301
The RSI function may interpret some types
of bicycle rack, connected to the electrical
socket for trailers, as a connected trailer. In
such cases, the driver display may show
incorrect speed information.
This function uses the car's camera and
radar units, which have certain general lim-
itations.
Related information
•
•
Limitations for camera and radar unit
(p. 415)
Speed limiter
A speed limiter (SL
27
) can be likened to a
reverse cruise control - the driver regulates
the speed using the accelerator pedal but is
prevented from accidentally exceeding a pre-
selected/set maximum speed by the speed
limiter.
Buttons and symbols for the function.
: Activates the speed limiter from
standby mode and resumes stored maxi-
mum speed
: Increases the stored maximum
speed
:
From standby mode
– activates the
speed limiter and stores current speed
:
From active mode
– deactivates/
changes the speed limiter to standby
mode
: Reduces stored maximum speed
Marker for stored max speed
The car's current speed
Stored maximum speed
24
Road Sign Information
25
In cars equipped with Sensus Navigation
*
.
26
Map data with speed information does not exist for all areas.
27
Speed Limiter
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
302
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Related information
•
Driving support systems (p. 286)
•
Limitations for speed limiter (p. 304)
•
Selecting and activating speed limiter
(p. 302)
•
Deactivating the speed limiter (p. 303)
•
Temporary deactivation of speed limiter
(p. 304)
•
Set the stored speed for driver support
(p. 338)
•
Automatic speed limiter (p. 304)
Selecting and activating speed
limiter
The speed limiter function (SL
28
) must first
be selected and activated in order to be able
to regulate the speed.
The speed limiter cannot be activated until
after the engine has been started. The lowest
maximum speed that can be stored is
30 km/h (20 mph).
1. Press
◀
(1) or
▶
(3) to scroll to the symbol
for the speed limiter
(4).
> The symbol is grey – the speed limiter
is in standby mode.
2. When speed limiter is selected – press the
steering wheel button
(2) to activate.
> The symbol is white – the speed limiter
is started and the current speed is
stored as maximum speed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
303
Related information
•
•
Deactivating the speed limiter (p. 303)
•
Temporary deactivation of speed limiter
(p. 304)
Deactivating the speed limiter
The speed limiter (SL
29
) can be deactivated
and switched off.
1. Press the steering wheel button
(2).
> The symbol and indicators turn grey –
the speed limiter is set in standby mode
and the driver can exceed the set speed
limit.
2. Press the steering wheel button
◀
(1) or
▶
(3) to change to another function.
> The driver display's symbol and indica-
tor for speed limiter (4) are switched off
– which deletes the stored maximum
speed.
Related information
•
•
Selecting and activating speed limiter
(p. 302)
•
Temporary deactivation of speed limiter
(p. 304)
28
Speed Limiter
29
Speed Limiter
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
304
Temporary deactivation of speed
limiter
The speed limiter (SL
30
) can be temporarily
deactivated and set in standby mode.
The speed limiter can also be temporarily
deactivated and overridden with the accelera-
tor pedal without the speed limiter first having
to be set in standby mode - e.g. to be able to
quickly accelerate the car out of a situation.
In which case, proceed as follows:
1. Fully depress the accelerator pedal and
release it to interrupt acceleration when
the desired speed has been reached.
> In this mode, the speed limiter is still
activated and the driver display's sym-
bol is therefore WHITE.
2. Fully release the accelerator pedal when
the temporary acceleration is finished.
> The car is then engine-braked automat-
ically to below the last stored maximum
speed.
Related information
•
•
Selecting and activating speed limiter
(p. 302)
•
Deactivating the speed limiter (p. 303)
Limitations for speed limiter
Speed limiter (SL
31
) has certain general limi-
tations.
On steep downhill gradients the speed limit-
er’s braking effect may be inadequate and
hence the stored maximum speed may be
exceeded. In this case, the driver is alerted by
the message
Speed limit exceeded
in the
driver display.
A text message that the maximum speed is
exceeded will be activated if the speed has
been exceeded by at least 3 km/h
(approx. 2 mph).
Related information
•
Automatic speed limiter
The Automatic Speed Limiter (ASL
32
) func-
tion helps the driver to adapt the car's maxi-
mum speed to the speed shown on the road
signs.
The Speed Limiter function (SL
33
) can be
changed to Automatic Speed Limiter (ASL).
The automatic speed limiter uses speed infor-
mation from the Road Sign Information
*
(RSI
34
) function to automatically adapt the
car's maximum speed.
WARNING
Even if the driver clearly sees the speed-
related road sign, the speed information
from the Road Sign Information
*
(RSI)
function to ASL may be incorrect – in such
cases the driver must intervene him/herself
and accelerate or brake to a suitable speed.
30
Speed Limiter
31
Speed Limiter
32
Automatic Speed Limiter
33
Speed Limiter
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
305
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Symbol for automatic speed limiter
The sign symbol (displayed along-
side the stored speed, "70", in the
centre of the speedometer) can be
shown in three colours with the fol-
lowing meanings:
Colour of
sign symbol
Meaning
Greenish yel-
low
The automatic speed limiter
is active.
Grey
The automatic speed limiter
is set in standby mode.
Orange
Automatic speed limiter is
in temporary standby mode
- e.g. due to a road sign not
being read.
Symbol for which speed limiter
function is active
The symbol display in the driver display
changes depending on whether it is cruise
control or automatic cruise control that is
active.
Symbol
SL ASL
WHITE symbol: Function active,
GREY symbol: Standby mode.
✓
✓
Sign symbol after "70" = Automatic
Speed Limiter is activated.
✓
Related information
•
Driving support systems (p. 286)
•
Activating or deactivating the automatic
speed limiter (p. 306)
•
Changing the tolerance for the automatic
speed limiter (p. 307)
•
Limitations for automatic speed limiter
(p. 307)
•
•
34
Road Sign Information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
306
Activating or deactivating the
automatic speed limiter
The automatic speed limiter function (ASL
35
)
can be activated and deactivated as a supple-
ment to the speed limiter (SL
36
).
Activate or deactivate the
function using this button in
the centre display's function
view.
•
GREEN button indication – the function is
activated. Press the steering wheel button
to start the automatic speed limiter
with the current speed.
•
GREY button indication – the function is
deactivated. Normal speed limiter is acti-
vated instead.
•
If the automatic speed limiter function
is activated, road sign information
(RSI
37
) is shown in the driver display
even if the Road Sign Information is
not activated.
•
To remove road sign information from
the driver display, you must deactivate
both
the automatic speed limiter and
Road Sign Information.
•
When the automatic speed limiter
function is activated but Road Sign
Information is deactivated, no warn-
ings are given from Road Sign Infor-
mation. Road Sign Information must
also be activated in order to receive
warnings.
Deactivating the automatic speed
limiter
To deactivate the automatic speed limiter:
–
Tap on the button in the function view.
> GREY button indication – ASL is
switched off and SL is activated
instead.
WARNING
After switching from ASL to SL the car will
no longer follow the signed speed limit but
only the stored maximum speed.
Related information
•
•
Automatic speed limiter (p. 304)
•
Limitations for automatic speed limiter
(p. 307)
•
35
Automatic Speed Limiter
36
Speed Limiter
37
Road Sign Information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
307
Changing the tolerance for the
automatic speed limiter
The Automatic Speed Limiter function
(ASL
38
) can be set for different tolerance lev-
els. The tolerance is adjusted in the same way
as the speed setting is in the speed limiter.
If, for example, the car follows a signed speed
limit of 70km/h (43 mph) the driver can
instead choose to allow the car to maintain
75 km/h (47 mph).
Buttons and symbols for the function
–
Press the steering wheel button
(1)
until 70 km/h (43 mph) in the centre of
the speedometer (2) changes to 75 km/h
(47 mph).
> After which, the car uses the selected
tolerance 5 km/h (4 mph) as long as
signs passed are showing 70 km/h
(43 mph).
The tolerance is followed until a road sign with
a lower or higher speed is passed - then the
car follows the new signed speed limit instead
and the tolerance is deleted from the memory.
The maximum selectable tolerance is
+/- 10 km/h (5 mph).
Related information
•
Automatic speed limiter (p. 304)
•
Limitations for automatic speed limiter
(p. 307)
•
Limitations for automatic speed
limiter
Automatic speed limitation (ASL
39
) takes
place using speed information from the Road
Sign Information function
*
(RSI
40
) – not from
the speed limit road signs that the car
passes.
If road sign information cannot interpret and
provide speed information to the driver sup-
port systems, the automatic speed limiter is
set in standby mode and changes to normal
speed limiter. In such cases the driver must
intervene and brake to a suitable speed.
The automatic speed limiter will be reactivated
when road sign information can once again
interpret and provide speed information.
Related information
•
•
Automatic speed limiter (p. 304)
•
38
Automatic Speed Limiter
39
Automatic Speed Limiter
40
Road Sign Information – RSI
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
308
Cruise control
The cruise control (CC
41
) helps the driver
maintain an even speed, which can result in
more relaxed driving on motorways and long,
straight roads in regular traffic flows.
Buttons and symbols for the function
: Activates cruise control from standby
mode and resumes stored speed
: Increases the stored speed
:
From standby mode
– activates
cruise control and stores current speed
:
From active mode
– deactivates/
changes cruise control to standby mode
: Reduces stored speed
Marker for stored speed
The car's current speed
Stored speed
In cars equipped with adaptive cruise con-
trol
*
(ACC
42
), it is possible to switch
between cruise control and adaptive cruise
control.
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Using engine braking instead of the
foot brake
With Cruise Control, speed is regulated with
less frequent application of the foot brake. On
a downhill gradient it may sometimes be
desirable to start moving a little faster and
41
Cruise Control
42
Adaptive Cruise Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
309
limit the acceleration by engine braking. In this
case the driver can temporarily disable foot
brake application by Cruise Control.
To do so, proceed as follows:
–
Depress the accelerator pedal about half-
way down and release.
> Cruise Control will disengage its auto-
matic foot braking and then uses
engine braking only.
Related information
•
Driving support systems (p. 286)
•
Selecting and activating cruise control
(p. 309)
•
Deactivating cruise control (p. 310)
•
Standby mode for cruise control (p. 310)
•
Set the stored speed for driver support
(p. 338)
•
Change between cruise control and adap-
tive cruise control
Selecting and activating cruise
control
The cruise control function (CC
43
) must first
be selected and activated in order to be able
to regulate the speed.
In order to start the cruise control from the
standby mode, the car's current speed must
be 30 km/h (20 mph) or higher.
1. Press
◀
(1) or
▶
(3) to scroll to the symbol
for cruise control
(4).
> The symbol is grey – cruise control is in
standby mode.
2. When cruise control is selected – press
the steering wheel button
(2) to acti-
vate.
> The symbol is white – cruise control is
started and the current speed is stored
as maximum speed. The lowest speed
that can be stored is 30 km/h
(20 mph).
Reactivating cruise control to the last
stored speed
–
When cruise control is selected – press
the steering wheel button
to activate.
> The cruise control markings and sym-
bols in the driver display change colour
from GREY to WHITE — the car will
now follow the most recently stored
speed again.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
•
•
Deactivating cruise control (p. 310)
•
Standby mode for cruise control (p. 310)
43
Cruise Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
310
Deactivating cruise control
Cruise control (CC
44
) can be deactivated and
switched off.
1. Press the steering wheel button
(2).
> The symbol and indicators turn grey –
cruise control is set in standby mode.
2. Press the steering wheel button
◀
(1) or
▶
(3) to change to another function.
> The driver display's symbol and indica-
tor for cruise control (4) are switched
off – which deletes the stored maxi-
mum speed.
Related information
•
•
Change between cruise control and adap-
tive cruise control
•
Selecting and activating cruise control
(p. 309)
•
Standby mode for cruise control (p. 310)
Standby mode for cruise control
Cruise control (CC
45
) can be deactivated and
set in standby mode. This can take place due
to driver intervention or automatically.
Standby mode means that the function is
selected in the driver display but not activated.
In this case, cruise control does not regulate
speed.
Standby mode on driver intervention
Cruise control is deactivated and set to
standby mode if any of the following occur:
•
The foot brake is used.
•
The gear selector is moved to
N
position.
•
The clutch pedal is held depressed for
longer than 1 minute.
•
The driver maintains a speed higher than
the stored speed for longer than 1 minute.
The driver must then control the speed him-
self/herself.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
44
Cruise Control
45
Cruise Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
311
Automatic standby mode
Activation of automatic standby mode can be
due to one of the following:
•
The wheels are losing traction.
•
The engine speed is too low/high.
•
Brake temperature is too high.
•
Speed falls below 30 km/h (20 mph).
The driver must then control the speed him-
self/herself.
Related information
•
•
Selecting and activating cruise control
(p. 309)
•
Deactivating cruise control (p. 310)
Adaptive cruise control
*
46
The adaptive cruise control (ACC
47
) can help
the driver to maintain a constant speed, com-
bined with a preset time interval to the vehi-
cle ahead.
The camera and radar unit measures the distance to
the vehicle ahead.
An adaptive cruise control can provide a more
relaxing driving experience on long journeys on
motorways and long straight main roads in
smooth traffic flows.
The driver selects the desired speed and a
time interval to the vehicle ahead. If the cam-
era and radar unit detects a slower vehicle in
front of the car, the speed is adapted automat-
ically via the preset time interval to the vehicle.
When the road is clear again the car returns to
the selected speed.
If the cornering support
*
function is activated,
this may also affect the speed of the car.
The adaptive cruise control aims to:
•
regulate the speed smoothly. In situations
that demand sudden braking the driver
must brake himself/herself. This applies in
cases of large speed differences or if the
vehicle in front brakes suddenly. Due to
the limitations of the radar unit, braking
may come unexpectedly or not at all.
•
follow the vehicle ahead in the same lane
at a time interval set by the driver. If the
radar unit cannot see any vehicle in front
then the car will instead maintain the
speed set and stored by the driver. This
also takes place if the speed of the vehicle
ahead increases and exceeds the stored
speed.
46
This function can come as either standard or an option depending on the market.
47
Adaptive Cruise Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
312
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Maintenance of driver support components
must only be performed at a workshop –
an authorised Volvo workshop is recom-
mended.
Related information
•
Driving support systems (p. 286)
•
Controls for adaptive cruise control
•
Display mode for adaptive cruise control
•
Selecting and activating adaptive cruise
control
•
Limitations for adaptive cruise control
•
Symbols and messages for adaptive
cruise control
•
Warning from driver support in the event
of a collision risk (p. 336)
•
Set time interval to vehicle ahead (p. 339)
•
Set the stored speed for driver support
(p. 338)
•
Automatic braking with driver support
(p. 340)
•
Change of target with driver support
(p. 337)
•
Controls for adaptive cruise
control
*
48
A summary of how adaptive cruise control
(ACC
49
) is controlled using the left-hand key-
pad on the steering wheel and how the func-
tion is shown in the display.
:
From standby mode
- activates and
stores the current speed
:
From active mode
- deactivates/
changes to standby mode
: Activates the function from standby
mode and resumes stored speed
: Increases the stored speed
: Reduces stored speed
48
This function can be either standard or optional, depending on market.
49
Adaptive Cruise Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
313
Increases the time interval to vehicles
ahead
Reduces the time interval to vehicles
ahead
Target vehicle indicator: The function has
detected and is following a target vehicle
at the preset time interval
Symbol for time interval to vehicles ahead
Related information
•
•
Limitations for adaptive cruise control
Display mode for adaptive cruise
control
*
50
The following image example shows how
Adaptive cruise control (ACC
51
) can be shown
in the display in the different context.
Speed
Indication of speeds
Stored speed
Speed of vehicle ahead
Current speed of your car
Time interval
The time interval is only
adjusted to the vehicle ahead
by the Adaptive cruise control
when the distance symbol
shows two vehicles. At the
same time a speed range is
marked.
When driving
In the following illustrative example, the road
sign information
*
(RSI
52
) function informs the
driver that the maximum permitted speed is
130 km/h (80 mph).
50
This function can be either standard or optional, depending on market.
51
Adaptive Cruise Control
52
Road Sign Information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст