Volvo S60 Twin Engine (2020 year). Manual in english — page 11
SEATS AND STEERING WHEEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
182
Manual front seat
The car's front seats have a range of setting
options in order to enhance comfort.
Raise/lower the front edge of the seat
cushion
*
by pumping up/down.
1
Change the length
*
of the seat cushion by
pulling the lever up and moving the seat
cushion forward/backward by hand.
Adjust the seat forward/backward by lift-
ing the handle and adjusting the distance
to the steering wheel and pedals. Check
that the seat is locked after the position
has been adjusted.
Change the lumbar support
*
by pressing
the button upward/downward/forward/
back
2
.
Raise/lower the seat by means of adjust-
ing the control up/down.
Change the backrest inclination by turning
the control knob.
WARNING
Adjust the position of the driver's seat
before setting off, never while driving.
Make sure that the seat is in locked posi-
tion in order to avoid personal injury in the
event of heavy braking or an accident.
Related information
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
1
Only applies to the driver's seat.
2
Applicable to four-way lumbar support
*
. Two-way lumbar support
*
is adjusted forwards/backwards.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
}}
* Option/accessory.
183
Power
*
front seat
The car's front seats have a range of setting
options in order to enhance comfort. The
power seat can be moved forwards/back-
wards and upwards/downwards. The front
edge of the seat cushion can be raised/
lowered as well as adjusted in length
*
and the
backrest inclination can be changed. The
lumbar support
*
can be adjusted upward/
downward/forward/backward.
3
Seat setup can take place when the engine is
running and within a certain time after unlock-
ing the door without the engine running.
Adjustment can also be performed within a
certain time after the engine has been
switched off.
The power seats have overload protection
that is triggered if any seat is blocked by an
object. If this happens, remove the object
and then move the seat again.
Related information
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
Adjusting the power
*
front seat
Set the preferred seat position using the con-
trol on the front seat's seating section. To set
the various comfort functions, turn the multi-
function control
4
up/down.
The illustration shows the controls from a car with
four-way lumbar support
*
. Cars with two-way lumbar
support
*
do not have the rotatable multifunction con-
trol.
In cars with four-way lumbar support
*
,
turn the multifunction control
4
up/down to
set the different comfort functions. In cars
with two-way lumbar support
*
, use the
round button to adjust the lumbar support
forward/backward.
Raise/lower the seat cushion front edge
by adjusting the control up/down.
3
Applicable to four-way lumbar support
*
. Two-way lumbar support
*
is adjusted forwards/backwards.
4
Not available in cars with two-way lumbar support
*
.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
SEATS AND STEERING WHEEL
* Option/accessory.
184
Raise/lower the seat by means of adjust-
ing the control up/down.
Move the seat forward/backward by
adjusting the control forward/backward.
Change the backrest inclination by adjust-
ing the control forward/backward.
Only one movement (forward/back/up/down)
can be made at a time.
The backrests of the front seats cannot be
lowered fully forward.
Related information
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
Storing position for seat, door
mirrors and head-up display
*
You can store the position for power
*
seat,
door mirrors and head-up display
*
in the
memory buttons.
Store two different positions for the power
*
seat, the door mirrors and the head-up dis-
play
*
using the memory buttons. The buttons
are located on the inside of one of the front
doors or both
*
.
Button
M
for storing settings.
Memory button.
Memory button.
Storing a position
1. Adjust seat, door mirrors and head-up dis-
play to the desired position.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
}}
* Option/accessory.
185
2. Press and hold the
M
button depressed.
The light indicator in the button illumi-
nates.
3. Within three seconds, press and hold the
1
or
2
button.
> When the position has been stored in
the selected memory button, an acous-
tic signal can be heard and the light
indicator in the
M
button extinguishes.
If none of the memory buttons is depressed
within three seconds then the
M
button extin-
guishes and no storing takes place.
The seat, the door mirrors or the head-up-dis-
play must be readjusted before a new memory
can be set.
Related information
•
•
•
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
•
Angling the door mirrors (p. 171)
•
Using a stored position for seat,
door mirrors and head-up display
*
If the positions for the power
*
seat, the door
mirrors and the head-up display
*
have been
stored, they can be activated by using the
memory buttons.
Using a stored setting
A stored setting can be used with the front
door either open or closed:
Open front door
–
Depress one of the memory buttons
1
(
)
or
2
(
) with a short press. Power seat,
door mirrors and head-up display move
and then stop at the positions stored in
the selected memory button.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
SEATS AND STEERING WHEEL
* Option/accessory.
186
Closed front door
–
Hold one of the memory buttons
1
(
) or
2
(
) depressed until seat, door mirrors
and head-up display stop in the positions
that are stored in the selected memory
button.
If the memory button is released, the move-
ment of the seat, door mirrors and head-up
display will be stopped.
WARNING
•
Because the driver's seat can be
adjusted with the ignition off, children
should never be left unattended in the
vehicle.
•
Movement of the seat can be STOP-
PED at any time by pressing any but-
ton on the power seat control panel.
•
Do not adjust the seat while driving.
•
Make sure there is nothing under the
seats when they are being adjusted.
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
•
Angling the door mirrors (p. 171)
•
Massage settings
*
in the front seat
Both the multi-function control on the side of
the seat and the centre display can be used in
order to change the settings. The range of
settings is shown in the centre display.
Multi-function control, located on the side of the
seat's seating section.
Settings for massage
The following setting options are available for
massage:
•
On
/
Off
: Select
On
/
Off
in order to switch
on/off the massage function.
•
Programs 1-5
: There are 5 preset mas-
sage programs. Select between
Swell
,
Tread
,
Advanced
,
Lumbar
and
Shoulder
.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
}}
* Option/accessory.
187
•
Intensity
: Select between
Low
,
Normal
and
High
.
•
Speed
: Select between
Slow
,
Normal
and
Fast
.
Restarting massage
The massage function is deactivated automat-
ically after 20 minutes. Reactivation of the
function is performed manually.
–
Tap on
Restart
, which is shown in the
centre display, to restart the selected mas-
sage program.
> The massage program restarts. If no
action is taken, the message remains
shown in the top view.
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
Adjusting the passenger seat from the
driver's seat
Adjusting massage settings
*
in the
front seat
Both the multi-function control on the seat
and the centre display can be used in order to
change the settings. The range of settings is
shown in the centre display.
Adjusting massage settings in the
front seat
The front seat has massage in the backrest.
The massage is performed by air cushions that
can massage with different settings.
The massage function can only be activated
when the car's engine is running.
1. Activate the multi-function control by turn-
ing the control
upwards/downwards.
The seat settings view will be shown in
the centre display.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
SEATS AND STEERING WHEEL
* Option/accessory.
188
2. Select
Massage
in the seat settings view.
3. To choose between the different massage
functions, select either directly in the cen-
tre display or by moving the cursor up/
down using the multi-function control's
upper
/lower
button. Change the
setting in the selected function directly in
the centre display, by pressing the arrows,
or by using the multi-function control's
front
/rear
button.
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
the length of the seat cushion
•
•
•
•
Adjusting the passenger seat from the
driver's seat
Adjusting
*
the length of the seat
cushion in the front seat
Depending on equipment level selected, seat
cushion length is adjusted either using the
multifunction control
*
on the side of the
seat's seat cushion, or manually using a con-
trol on the front of the seat cushion.
Adjusting the length of the seat
cushion using the multifunction
control
Multifunction control, located on the side of the seat
cushion.
1. Activate the multi-function control by turn-
ing the control
upwards/downwards.
The seat settings view will be shown in
the centre display.
2. Select
Cushion extension
in the seat set-
tings view.
•
Press the front section of the four-way
button
to extend the seat cushion.
•
Press the rear section of the four-way
button
to retract the seat cushion.
Adjusting the length of the seat
cushion manually
Control for seat cushion adjustment.
1. Grip the handle
on the front of the seat
and pull upwards.
2. Adjust the length of the seat cushion.
3. Release the handle and make sure that the
seat cushion has reached the correct posi-
tion.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
189
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
•
•
•
Adjusting the passenger seat from the
driver's seat
Adjusting the side support
*
in the
front seat
Increase comfort in the front seat by adjust-
ing the sides of the backrest.
Multi-function control, located on the side of the
seat's seating section.
The sides of the backrest can be adjusted to
provide side support. Both the multi-function
control on the seat and the centre display can
be used in order to change the settings. The
range of settings is shown in the centre dis-
play.
To adjust the side support:
1. Activate the multi-function control by turn-
ing the it up/down
. The seat settings
view will be shown in the centre display.
2. Select
Side bolsters
in the seat settings
view.
•
Press the front section of the four-way
button to increase side support
.
•
Press the rear section of the four-way
button to decrease side support
.
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
190
Adjusting the lumbar support
*
in
the front seat
The lumbar support is adjusted using a con-
trol on the side of the seat cushion.
Multifunction control in cars with four-way lumbar
support
*
.
Control in cars with two-way lumbar support
*
.
The lumbar support is adjusted using the mul-
tifunction control in cars with four-way lumbar
support
*
, or using the round button in cars
with two-way lumbar support
*
. The control is
located on the side of the seat's seating sec-
tion. Depending on the equipment level
selected, the lumbar support can be adjusted
forward/back and up/down (four-way lumbar
support) or forward/back (two-way lumbar
support).
Adjust the lumbar support in the car
using the four-way lumbar support
1. Activate the multi-function control by turn-
ing the control
upwards/downwards.
The seat settings view will be shown in
the centre display.
2. Select
Lumbar
in the seat settings view.
•
Press the round button up
/down
to move the lumbar support upwards/
downwards.
•
Press the front section
of the button
to increase lumbar support.
•
Press the rear section
of the button
to decrease lumbar support.
Adjust the lumbar support in the car
using the two-way lumbar support
1. Press the front section
of the round
button to increase lumbar support.
2. Press the rear section
of the round but-
ton to decrease lumbar support.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
}}
* Option/accessory.
191
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
•
the length of the seat cushion
•
•
•
Adjusting the passenger seat from the
driver's seat
Adjusting the passenger seat from
the driver's seat
*
The front passenger seat can be adjusted
from the driver's seat.
Activating the function
The function is activated via the function view
in the centre display:
Press the
Adjust Passenger
Seat
button to activate.
Adjust passenger seat
From activation of the function, the driver
must adjust the passenger seat within 10 sec-
onds. If no adjustment is made within this
time the function is deactivated.
The driver adjusts the passenger seat using
the controls on the driver's seat:
Move the passenger seat forward/back-
ward by adjusting the control forward/
backward.
Change the passenger seat's backrest
inclination by adjusting the control for-
ward/backward.
Related information
•
•
•
•
Storing position for seat, door mirrors and
head-up display
•
Using a stored position for seat, door mir-
rors and head-up display
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
192
•
the length of the seat cushion
•
•
•
Lowering the backrests in the rear
seat
*
The rear seat's backrest is divided into two
parts. The two parts can be folded forward
individually.
WARNING
•
Adjust the seat and fix it before driving
away. Take care when adjusting the
seat. Uncontrolled or careless adjust-
ment can lead to trapping injuries.
•
When loading long objects, they must
always be strapped in securely to avoid
injury and damage during sudden brak-
ing.
•
Always switch off the engine and apply
the parking brake when loading and
unloading the car.
•
For cars with automatic gearbox, set
the gear selector in
P
to prevent it from
being moved by mistake.
There must be no objects on the rear seat
when the backrest is to be folded down.
The seat belts must not be connected
either. Otherwise there is a risk of damag-
ing the rear seat upholstery.
The armrest
*
for the centre seat must be
raised before lowering the seat.
The through-load hatch
*
in the rear seat
must be closed before lowering.
When private locking is activated, the rear
seat must be in upright position for locking
to work. With the rear seat in lowered
position, locking will not work.
The front seats may need to be pushed for-
wards, and/or the backrests adjusted
upwards, in order that the rear backrests
can be fully folded forward.
Lowering the backrest
To facilitate folding of the rear seat, the car
must be stationary and at least one rear door
open.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
}}
* Option/accessory.
193
Buttons for seat folding, located on the upper section
of the rear seat.
1. Ensure that there are no occupants or
objects in the rear seat.
2. Lower the centre seat's head restraint
manually.
3. Press and hold one of the buttons located
in the parcel shelf on the left-hand side of
the car.
4. The seat is released from the lock but
remains in the same position. The head
restraints are lowered automatically.
5. Lower the backrest manually to the hori-
zontal position.
Raising the backrest
Raising the backrest to upright position is car-
ried out manually:
1. Move the backrest up/back.
2. Press the backrest until the lock engages.
3. Raise the head restraints manually.
4. If necessary, raise the centre seat's head
restraint.
WARNING
Check that the backrests and head
restraints in the rear seat are locked prop-
erly after being folded up.
The head restraints of the outer seats must
always be raised when there are passen-
gers on any of the rear seats.
Related information
•
Adjusting the head restraints in the rear
seat (p. 193)
•
•
Activating and deactivating private locking
(p. 268)
Adjusting the head restraints in the
rear seat
Adjust the centre seat head restraint accord-
ing to the height of the passenger. Fold down
the outer seat head restraints
*
to improve
rearward visibility.
Adjust the head restraint for the
centre seat
The centre seat's head restraint must be
adjusted according to the passenger's height
so that, if possible, the whole of the back of
the head is covered. Slide it up manually as
required.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
SEATS AND STEERING WHEEL
* Option/accessory.
194
To lower the head restraint, the button (see
illustration) must be depressed while the
restraint is carefully moved down.
WARNING
The centre seat head restraint must be in
its lowest position when the centre seat is
not used. When the centre seat is used, the
head restraint must be correctly adjusted
to the height of the passenger so that it
covers the whole of the back of the head if
possible.
Fold down the rear seat's outer head
restraints via the centre display
*
The outer head restraints can be retracted via
the centre display's function view. You can
lower the head restraints in ignition position
0
.
Press the
Headrest Fold
button to activate/deactivate
lowering.
Move the head restraint back manually until a
click is heard.
WARNING
Do not lower the outer head restraints if
there are passengers in any of the outer
rear seats.
WARNING
The head restraint must be in locked posi-
tion after being folded up.
Related information
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
195
Steering wheel controls and horn
The steering wheel houses the horn and con-
trols for e.g. the driver support systems and
voice recognition.
Keypads and paddles
*
in the steering wheel.
Controls for driver support systems
5
.
Paddle shifter
*
for manual gear changing
in an automatic gearbox.
Controls for voice recognition and menu,
message and phone handling.
Horn
The horn is located in the centre of the steering
wheel.
Related information
•
•
Adjusting the steering wheel (p. 196)
Steering lock
The steering wheel lock makes it difficult to
steer the car if it is stolen, for example. A
mechanical noise can be perceived when the
steering lock is locked or unlocked.
Activating the steering lock
The steering lock is activated when the car is
locked from the outside and the engine is
switched off. If the car is left unlocked then
the steering lock will be activated automati-
cally after a while.
Deactivating the steering lock
The steering lock is deactivated when the car
is unlocked from outside. If the car is not
locked, the steering wheel lock will be deacti-
vated as long as the remote control key is in
the passenger compartment and the car is
started.
Related information
•
Steering wheel controls and horn (p. 195)
•
Adjusting the steering wheel (p. 196)
5
Speed Limiter, Cruise Control, Adaptive Cruise Control
*
, Distance Warning
*
and Pilot Assist.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SEATS AND STEERING WHEEL
* Option/accessory.
196
Adjusting the steering wheel
The steering wheel can be adjusted in differ-
ent positions.
The steering wheel can be adjusted for height and for
depth.
The steering wheel is adjusted in different
ways depending on whether or not the car is
equipped with knee airbag
6
.
WARNING
Adjust the steering wheel and fix it before
driving away. The steering wheel must
never be adjusted while driving.
With speed related power steering the level of
steering force can be adjusted. Steering force
is regulated according to the car's speed in
order to give the driver enhanced road respon-
siveness.
Adjusting the steering wheel in a car with a
knee airbag
Lever for steering wheel adjustment.
1. Push the lever forwards to release the
steering wheel.
2. Adjust the steering wheel to the position
that suits you.
3. Pull the lever back to fix the steering
wheel in place. If the lever is stiff, press
the steering wheel lightly at the same time
as you move the lever back.
Adjusting the steering wheel in a car
without a knee airbag
Lever for steering wheel adjustment.
1. Pull the lever backwards to release the
steering wheel.
2. Adjust the steering wheel to the position
that suits you.
3. Push the lever forwards to secure the
steering wheel. If the lever is stiff, press
the steering wheel lightly at the same time
as you move the lever back.
Related information
•
•
Steering wheel controls and horn (p. 195)
•
6
The car is only equipped with knee airbag in certain markets.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст