Volvo S60 Twin Engine (2020 year). Manual in english — page 33

SOUND, MEDIA AND INTERNET

}}

* Option/accessory.

533

Remove Wi-Fi network

Removing a network that is not to be used.

1. Press

Settings

in the top view.

2. Continue to

Communication

Wi-Fi

Saved networks

.

3. Tap on

Forget

alongside the network to

be removed.

4. Confirm the selection.

> The car will no longer connect to the

network in future.

Remove all networks

All networks can be removed simultaneously
by restoring factory settings. Please note that
all user data and system settings are reset to
original factory settings.

Related information

•

Internet-connected car

*

(p. 527)

•

No or poor Internet connection (p. 532)

•

Resetting settings in the centre display
(p. 132)

•

Connect the car to the Internet via a
phone (Wi-Fi) (p. 529)

Wi-Fi technologies and security

Possible network types to connect to.

It is only possible to connect to the following
types of network:

•

Frequency — 2.4 or 5 GHz

15

.

•

Standards — 802.11 a/b/g/n.

•

Security type — WPA2-AES-CCMP.

The car’s Wi-Fi system is designed to handle
Wi-Fi devices inside the car.

If several devices operate on the frequency at
the same time then it may result in reduced
performance.

Related information

•

Internet-connected car

*

(p. 527)

User terms and conditions and

data sharing

The first time certain services and apps are
started, a pop-up window with the headings

Terms and conditions

and

Data sharing

may be shown.

The purpose is to inform about Volvo's user
terms and conditions and policy for data shar-
ing. By accepting data sharing, the user
accepts that certain information is sent from
the car. This is required so that certain servi-
ces and apps can have full functionality.

The data sharing function for online services
and apps is deactivated as default

16

. Data

sharing needs to be activated so that certain
online services and apps in the car can be
used. Data sharing can be set from the centre
display's settings menu or in connection with
the services or apps being started in the cen-
tre display.

Privacy and data sharing

With the software update made available
November 2017, privacy and data sharing set-
tings were introduced for online services and
downloaded apps. The settings can be found
under

Privacy and data

in the settings menu

in the car's centre display.

15

Selection of frequency is not available on all markets.

16

Does not apply to Volvo On Call

*

.

||

SOUND, MEDIA AND INTERNET

534

There you can select the online services which
are allowed to share data. Data sharing for
downloaded apps can also be deactivated
there. Note that services and apps cannot be
used as intended if data sharing is deacti-
vated.

After a factory reset or e.g. a workshop visit or
software update, the data sharing settings
may have been reset to their default settings.
In which case, reactivate data sharing for
online services and for downloaded apps.

NOTE

Privacy and data sharing settings are
unique for every driver profile.

Related information

•

Activating and deactivating data sharing
(p. 534)

Activating and deactivating data

sharing

Data sharing for services and apps required
can be set in the centre display's settings
menu.

1. Press

Settings

in the top view in the cen-

tre display.

2. Press

System

Privacy and data

.

3. Select activation or deactivation of data

sharing for individual services and all apps.

If data sharing has not been activated for an
online service or downloaded apps, this can be
done when they are started in the centre dis-
play. If this is the first time a service is started,
or e.g. after a factory reset or certain software
updates, Volvo's terms and conditions for
online services need to be approved. Note that
data sharing will then also be activated for
other services or apps for which sharing has
already been approved.

NOTE

After a visit to a Volvo workshop, you may
need to reactivate data sharing so that the
online services and apps shall work again.

Related information

•

User terms and conditions and data shar-
ing (p. 533)

Data sharing for services

If you have not activated data sharing for an
online service or for downloaded apps, you
can do this in connection with starting them
in your centre display. If this is the first time
you are starting a service, or e.g. after a fac-
tory reset or certain software updates, you
also need to approve Volvo's terms and con-
ditions for online services.

SOUND, MEDIA AND INTERNET

535

Activate data sharing when you start a
service

1. Select the function or service to be acti-

vated.
> If this is the first time you are using the

service, or e.g. after a factory reset or
certain software updates, you first need
to approve Volvo's terms and condi-
tions for online services in order to con-
tinue.

2. Select to approve data sharing for the

service or to cancel.

If you select to approve, data sharing is acti-
vated and you can start to use the service.

Activate data sharing when you start
an app

To approve data sharing for an app that needs
the function, start the app and tap on

Allow

in

the pop-up window.

You can deactivate data sharing for services
and apps in the settings menu under

System

Privacy and data

Data Sharing

.

Storage space on hard disk

It is possible to view how much free space
there is on the car's hard disk.

Storage information for the car's hard disk,
including total capacity, available capacity and
how much space is used for installed apps can
be shown. The information is available under

Settings

System

System Information

Storage

.

Related information

•

Apps (p. 494)

SOUND, MEDIA AND INTERNET

536

License agreement for audio and

media

A license is an agreement for the right to
operate a certain activity or the right to use
someone else's entitlement according to the
terms and conditions in the agreement. The
following texts are Volvo's agreements with
manufacturers/developers.

Bowers & Wilkins

Bowers & Wilkins and B&W are trademarks
of the B&W Group Ltd. Nautilus is a trade-
mark of B&W Group Ltd. Kevlar is a registered
trademark of DuPont.

Dirac Unison

®

Dirac Unison co-optimises the loudspeakers in
frequency, time and space for the best possi-
ble bass integration and clarity. It enables a
faithful reproduction of the acoustic characte-
ristics of specific performance venues. Using
advanced algorithms, Dirac Unison controls all
loudspeakers digitally based on acoustic high-
precision measurements. Like a conductor of
an orchestra, it guarantees that the loudspeak-
ers perform in perfect unison.

DivX

®

DivX

®

, DivX Certified

®

and associated logo-

types are trademarks belonging to DivX, LLC
and are used under licence.

This DivX Certified

®

device can play back

DivX

®

Home Theater video files up to 576p

(including .avi, .divx). Download free software
on www.divx.com to create, play back and
stream digital video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified

®

device must be registered in order

to play back purchased DivX Video-on-
Demand (VOD) films. Get the registration
code by locating the DivX VOD section in the
device's settings menu. Go to vod.divx.com
for more information on how to complete the
registration.

Patent numbers

Protected by one or more of the following US
patents. 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.

Gracenote

®

SOUND, MEDIA AND INTERNET

}}

537

Parts of the content are copyright

of

Gracenote or its suppliers.

Gracenote,Gracenote logo and logotype,
"Powered by Gracenote" and Gracenote
MusicID are either registered trademarks or
trademarks of Gracenote, Inc. in the USA
and/or other countries.

Gracenote

®

End User License Agreement

This program or device contains software from
Gracenote, Inc. of Emeryville, California, USA
("Gracenote"). The software from Gracenote
("Gracenote software") activates this program
to perform disc and/or file identification and
obtain music-related information, including
name, artist, track and title ("Gracenote data")
from online servers or embedded databases
(together called "Gracenote servers") and in
order to perform other actions. You may only
use Gracenote data in accordance with the
intended end-user functions for this program
or this device.

You agree to only use Gracenote data, Grace-
note software and Gracenote servers for your
own personal non-commercial use. You agree
not to assign, copy, transfer or transmit this
Gracenote software or any Gracenote data to
any third party. YOU AGREE NOT TO USE OR
EXPLOIT GRACENOTE DATA, GRACENOTE
SOFTWARE OR GRACENOTE SERVERS,
EXCEPT AS EXPRESSLY PERMITTED IN
THIS AGREEMENT.

You agree that your non-exclusive right to use
Gracenote data, Gracenote software and
Gracenote servers will be terminated if you
violate these restrictions. If your license is ter-
minated you agree to cease all use of Grace-
note data, Gracenote software and Gracenote
servers. Gracenote holds exclusive rights to all
Gracenote data, all Gracenote software and all
Gracenote servers, including all ownership
rights. Gracenote will under no circumstances
have any obligation to pay you for any informa-
tion you provide. You agree that Gracenote,
Inc. may enforce the company's rights under
this agreement against you directly in its own
name.

The Gracenote service uses a unique identifier
to track enquiries for statistical purposes. The
purpose of a randomly assigned numeric iden-
tifier is to enable the Gracenote service to
count enquiries without knowing anything
about who you are. Additional information is
available on the web page for Gracenote's pri-
vacy policy for the Gracenote service.

The Gracenote software and everything
included in Gracenote data are licensed to you
"as is". Gracenote provides no undertakings or
warranties, express or implied, as to the accu-
racy of the Gracenote data contained in the
Gracenote servers. Gracenote reserves the
right to delete data from the Gracenote serv-
ers or to change data categories for any rea-
son that Gracenote deems sufficient. No war-

ranty is provided that the Gracenote software
or Gracenote servers are fault-free or that the
Gracenote software or Gracenote servers will
operate without interruption. Gracenote has
no obligation to provide you with new,
improved or additional data types or catego-
ries that Gracenote may provide in the future,
and the company reserves the right to discon-
tinue its services at any time.

GRACENOTE DISCLAIMS ALL WARRAN-
TIES, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTA-
BILITY, FITNESS FOR A PARTICULAR PUR-
POSE, TITLE AND NON-INFRINGEMENT OF
INTELLECTUAL PROPERTY RIGHTS.
GRACENOTE DOES NOT GUARANTEE THE
RESULTS OBTAINED THROUGH YOUR USE
OF THE GRACENOTE SOFTWARE OR A
GRACENOTE SERVER. GRACENOTE WILL
IN NO EVENT BE LIABLE FOR ANY CONSE-
QUENTIAL DAMAGE OR FOR ANY LOST
PROFITS OR REVENUES.

Gracenote, Inc. 2009

Sensus software

This software uses parts of sources from clib2
and Prex Embedded Real-time OS - Source
(Copyright (c) 1982, 1986, 1991, 1993, 1994),
and Quercus Robusta (Copyright (c) 1990,
1993), The Regents of the University of
California. All or some portions are derived

||

SOUND, MEDIA AND INTERNET

538

from material licensed to the University of
California by American Telephone and
Telegraph Co. or Unix System Laboratories,
Inc. and are reproduced herein with the
permission of UNIX System Laboratories, Inc.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met: Redistributions of source
code must retain the above copyright notice,
this list of conditions and the following
disclaimer. Redistributions in binary form must
reproduce the above copyright notice, this list
of conditions and the following disclaimer in
the documentation and/or other materials
provided with the distribution. Neither the
name of the <ORGANIZATION> nor the
names of its contributors may be used to
endorse or promote products derived from
this software without specific prior written
permission. THIS SOFTWARE IS PROVIDED
BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

This software is based in part on the work of
the Independent JPEG Group.

This software uses parts of sources from
"libtess". The Original Code is: OpenGL
Sample Implementation, Version 1.2.1,
released January 26, 2000, developed by
Silicon Graphics, Inc. The Original Code is
Copyright (c) 1991-2000 Silicon Graphics,
Inc. Copyright in any portions created by third
parties is as indicated elsewhere herein. All
Rights Reserved. Copyright (C) [1991-2000]
Silicon Graphics, Inc. All Rights Reserved.
Permission is hereby granted, free of charge,
to any person obtaining a copy of this
software and associated documentation files
(the "Software"), to deal in the Software
without restriction, including without
limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit
persons to whom the Software is furnished to

do so, subject to the following conditions: The
above copyright notice including the dates of
first publication and either this permission
notice or a reference to http://oss.sgi.com/
projects/FreeB/ shall be included in all copies
or substantial portions of the Software. THE
SOFTWARE IS PROVIDED "AS IS",
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
SILICON GRAPHICS, INC. BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE
SOFTWARE. Except as contained in this
notice, the name of Silicon Graphics, Inc. shall
not be used in advertising or otherwise to
promote the sale, use or other dealings in this
Software without prior written authorization
from Silicon Graphics, Inc.

This software is based in parts on the work of
the FreeType Team.

This software uses parts of SSLeay Library:
Copyright (C) 1995-1998 Eric Young
(eay@cryptsoft.com). All rights reserved

SOUND, MEDIA AND INTERNET

}}

539

Linux software

This product contains software licensed under
GNU General Public License (GPL) or GNU
Lesser General Public License (LGPL), etc.

You have the right of acquisition, modification,
and distribution of the source code of the
GPL/LGPL software.

You may download Source Code from the
following website at no charge: http://
www.embedded-carmultimedia.jp/linux/oss/
download/TVM_8351_013

The website provides the Source Code "As Is"
and without warranty of any kind.

By downloading Source Code, you expressly
assume all risk and liability associated with
downloading and using the Source Code and
complying with the user agreements that
accompany each Source Code.

Please note that we cannot respond to any
inquiries regarding the source code.

camellia:1.2.0

Copyright (c) 2006, 2007

NTT (Nippon Telegraph and Telephone
Corporation). All rights reserved.

Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:

1. Redistributions of source code must retain

the above copyright notice, this list of
conditions and the following disclaimer as
the first lines of this file unmodified.

2. Redistributions in binary form must

reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.

THIS SOFTWARE IS PROVIDED BY NTT ``AS
IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL NTT BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

Unicode: 5.1.0

COPYRIGHT AND PERMISSION NOTICE

Copyright c 1991-2013 Unicode, Inc. All rights
reserved. Distributed under the Terms of Use
in http://www.unicode.org/copyright.html.

Permission is hereby granted, free of charge,
to any person obtaining a copy of the Unicode
data files and any associated documentation
(the "Data Files") or Unicode software and any
associated documentation (the "Software") to
deal in the Data Files or Software without
restriction, including without limitation the
rights to use, copy, modify, merge, publish,
distribute, and/or sell copies of the Data Files
or Software, and to permit persons to whom
the Data Files or Software are furnished to do
so, provided that (a) the above copyright
notice(s) and this permission notice appear
with all copies of the Data Files or Software,
(b) both the above copyright notice(s) and this
permission notice appear in associated
documentation, and (c) there is clear notice in
each modified Data File or in the Software as
well as in the documentation associated with
the Data File(s) or Software that the data or
software has been modified.

THE DATA FILES AND SOFTWARE ARE
PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY,

||

SOUND, MEDIA AND INTERNET

540

FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT OF THIRD PARTY
RIGHTS. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR
PERFORMANCE OF THE DATA FILES OR
SOFTWARE.

Except as contained in this notice, the name of
a copyright holder shall not be used in

advertising or otherwise to promote the sale,
use or other dealings in these Data Files or
Software without prior written authorization of
the copyright holder.

Declaration of Conformity

SOUND, MEDIA AND INTERNET

}}

541

Country/
Area

Brazil:

Este equipamento opera em caráter secundário isto e, náo tem direito a protecão contra interferéncia prejudicial, mesmo tipo, e não
pode causar interferéncia a sistemas operando em caráter primário.

Para consultas, visite: www.anatel.gov.br

EU:

Manufacturer: Mitsubishi Electric Corporation Sanda Works 2-3-33, Miwa, Sanda-city. Hyogo, 669-1513, Japan

Mitsubishi Electric Corporation hereby declares that this type of radio equipment [Audio Navigation Unit] conforms with directive
2014/53/EU.

For more information, search support information at www.volvocars.com.

The Uni-
ted Arab
Emirates:

||

SOUND, MEDIA AND INTERNET

542

Country/
Area

Kazakh-
stan:

Model name: NR 0V

Manufacturer: Mitsubishi Electric Corporation

Exporting country: Japan

SOUND, MEDIA AND INTERNET

}}

543

Country/
Area

China:

1.

■ 使用频率

2.4 - 2.4835 GHz

■ 等效全向辐射

率(EIRP)

天线增益

10dBi 时

≤100 mW 或≤20 dBm ①

■ 最大

率谱密度

天线增益

10dBi 时

≤20 dBm / MHz(EIRP) ①

■ 载频容限

20 ppm

■ 帯外发射

率(在 2.4-2.4835GHz 頻段以外) ≤-80 dBm / Hz (EIRP)

■ 杂散发射(辐射)

率(对应载波±2.5 倍信道带宽以外)

•

≤-36 dBm / 100 kHz (30 - 1000 MHz)

•

≤-33 dBm / 100 kHz (2.4 - 2.4835 GHz)

•

≤-40 dBm / 1 MHz (3.4 - 3.53 GHz)

•

≤-40 dBm / 1 MHz (5.725 - 5.85 GHz)

•

≤-30 dBm / 1 MHz (其它 1 - 12.75 GHz)

2.不得擅自更改发射频率

大发射

率(包括额外

装射频

率放大器)，不得擅自外接天线或改用其它发射天线

3.使用时不得对各种合法的无线电通信业

产生有害干扰

一旦发现有干扰现象时，应立即停止使用，并采

措施消除干扰后方可继续

使用

4.使用微

率无线电设备，必须忍

各种无线电业

的干扰或工业

科学及医疗应用设备的辐射干扰

5.不得在飞机和机场附近使用

||

SOUND, MEDIA AND INTERNET

544

Country/
Area

Korea:

B

급

기기

(

가정용

방송통신기자재

)

이

기기는

가정용

(B

급

)

전자파적합기기로서

주로

가정에서

사용하는

것을

적으로

하며

,

든

지역에서

사용할

수

있습니다

.

해당

무선설비는

전파혼신

가능성이

있으므로

인명안전과

관련된

서비스는

할

수

습니다

.

Malaysia

This device has been certified under the Communications & Multimedia Act of 1998, Communications and Multimedia (Technical
Standards) Regulations 2000. To retrieve your device’s serial number, please visit (support.volvocars.com) and search for “SIRIM
Label Verification”.

Device category: Navigation equipment for vehicle (Bluetooth)

Model: NR-0V

Type Approval No.:

RBAY/18A/1015S(15-4067)

SOUND, MEDIA AND INTERNET

* Option/accessory.

545

Country/
Area

Mexico:

Taiwan:

低 率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司 商號或使用者均不得擅自

變更頻率 加大功率或變更原設計之特性及功能

第十四條

低 率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應
立停用，改善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線
電通信 低 率射頻電機須忍受合法通信或工業 科學及醫療用電波輻射性電機設備

之干擾

Related information

•

Sound, media and Internet (p. 492)

•

Internet-connected car

*

(p. 527)

•

Media player (p. 503)

•

Gracenote

®

(p. 507)

•

Sensus - online connectivity and entertain-
ment (p. 34)

VOLVO ON CALL

VOLVO ON CALL

* Option/accessory.

548

Plan and schedule the charging of

your car using the Volvo On Call

*

app

You can use the Volvo On Call app to plan
and schedule the charging of your car.

You can schedule charging for the charging
stations you have saved in your app, which
may be practical if, for example, you need to
plan charging points along a travel itinerary or
when you are planning charging intervals for
your car at home or in your neighbourhood.

1. Via the

Home

tab, select

Fuel range

or

Battery charging

.

> In the view that appears you can see

saved charging stations under

Saved

locations

. If you have not saved a

charging station yet or want to add
new locations, e.g. charging stations
along a travel itinerary or in your neigh-
bourhood, you can select the option for

Add location

(you can save up to eight

charging stations).

2. Select the location for which you want to

schedule charging.
> A view opens for the saved location.

3. Select a start time for the charging.

4. Select an end time for the charging.

5. Go back to the view for fuel.

> A charging icon appears by the saved

location for which you have scheduled
the charging. When the icon disappears
again the scheduling has been saved
and programmed.