Volvo V70 (2016 year). Instruction — part 4
||
03 Instruments and controls
03
70
*
Option/accessory, for more information, see Introduction.
Available engine power
Engine power utilised
Available engine power
The smaller, upper pointer shows the availa-
ble engine power
9
. The higher the reading on
the scale, the more power is available in the
current gear.
Engine power utilised
The larger, lower pointer shows the engine
power utilised
9
. The higher the reading on the
scale, the more power is being taken from the
engine.
A large gap between the two pointers indi-
cates a large power reserve.
Combined instrument panel -
meaning of indicator symbols
The indicator symbols alert the driver that a
function is activated, that the system is oper-
ating, or that an error or failure has occurred.
Indicator symbols
Symbol Specification
ABL fault
Emissions system
ABS fault
Rear fog lamp on
Stability system, see Electronic
stability control (ESC) - general
Stability system, sport mode,
see Electronic stability control
Engine preheater (diesel)
Low level in fuel tank
Symbol Specification
Information, read display text
Main beam On
Left-hand direction indicator
Right-hand direction indicator
Start/Stop, the engine auto-
function and operation (p. 282)
Tyre pressure system , see
ABL fault
The symbol illuminates if a fault has arisen in
the ABL function (Active Bending Lights).
Emissions system
If the symbol illuminates after the engine has
been started then it may be due to a fault in
the car's emissions system. Drive to a work-
shop for checking. Volvo recommends that
you seek assistance from an authorised Volvo
workshop.
9
Power is dependent on engine speed.
03 Instruments and controls
03
}}
71
ABS fault
If this symbol illuminates then the system is
not working. The car's regular brake system
continues to work, but without the ABS func-
tion.
1. Stop the car in a safe place and turn off
the engine.
2. Restart the engine.
3. If the symbol remains illuminated, drive to
a workshop to have the ABS system
checked. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Rear fog lamp on
This symbol illuminates when the rear fog
lamp is switched on.
Stability system
A flashing symbol indicates that the stability
system is operating. If the symbol illuminates
with constant glow then there is a fault in the
system.
Stability system, sport mode
Sport mode allows for a more active driving
experience. The system then detects whether
the accelerator pedal, steering wheel move-
ments and cornering are more active than in
normal driving and then allows controlled
skidding of the rear section up to a certain
level before it intervenes and stabilises the
car. The symbol illuminates when the sport
mode is activated.
Engine preheater (diesel)
This symbol illuminates during engine pre-
heating. Preheating takes place mostly due to
low temperature.
Low level in fuel tank
When the symbol illuminates the level in the
fuel tank is low, refuel as soon as possible.
Information, read display text
When one of the car's systems does not
behave as intended, this information symbol
illuminates and a text appears on the informa-
tion display. The message text is cleared with
the OK button, see Menu navigation - com-
bined instrument panel (p. 113), or it disap-
pears automatically after a time (time
depending on which function is indicated).
The information symbol can also illuminate in
conjunction with other symbols.
When a service message is shown, the
symbol and message are cleared using the
OK button, or disappear automatically
after a time.
Main beam On
The symbol illuminates when main beam is on
and with main beam flash.
Left/right-hand direction indicator
Both direction indicator symbols flash when
the hazard warning flashers are used.
Eco function on
This symbol illuminates when the Eco func-
tion is activated.
Start/Stop
The symbol shines when the engine is auto-
stopped.
Tyre pressure system
The symbol illuminates in the event of low
tyre pressure, or if a fault arises in the tyre
pressure system.
||
03 Instruments and controls
03
72
*
Option/accessory, for more information, see Introduction.
Reminder – doors not closed
If one of the doors is not closed properly then
the information or warning symbol illuminates
together with an explanatory image in the
information display. Stop the car in a safe
place as soon as possible and close the door
that is open.
If the car is driven at a speed lower
than approx. 7 km/h then the informa-
tion symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
If the bonnet
10
is not closed properly then the
warning symbol illuminates together with an
explanatory image in the information display.
Stop the car in a safe place as soon as possi-
ble and close the bonnet.
If the tailgate is not closed properly then the
information symbol illuminates together with
an explanatory image in the information dis-
play. Stop the car in a safe place as soon as
possible and close the tailgate.
Related information
•
Combined instrument panel (p. 65)
•
Combined instrument cluster - meaning
•
Digital combined instrument panel - over-
Combined instrument cluster -
meaning of warning symbols
The warning symbols alert the driver that an
important function is activated, or that a seri-
ous error or a serious failure has occurred.
Warning symbols
Symbol Specification
Low oil pressure
A
Parking brake applied, digital
instrument panel
Parking brake applied, ana-
logue instrument panel
Airbags – SRS
Seatbelt reminder
Alternator not charging
Fault in brake system
Warning
A
Certain engine variants do not have systems to warn of oil
pressure loss. In cars with these variants the symbol for
low oil pressure is not used. Warning for low oil level is via
display text. For more information, see Engine oil - general
Low oil pressure
If this symbol illuminates during driving then
the engine's oil pressure is too low. Stop the
engine immediately and check the engine oil
level, top up if necessary. If the symbol illumi-
nates and the oil level is normal, contact a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo work-
shop.
Parking brake applied
This symbol illuminates with a constant glow
when the parking brake is applied. The sym-
bol flashes during application, and then
changes over to a constant glow.
A flashing symbol in any other situation
means that a fault has arisen. Read the mes-
sage on the information display.
For more information, see Parking brake
Airbags – SRS
If this symbol remains illuminated or illumi-
nates while driving, it means a fault has been
detected in the seatbelt buckle, SRS, SIPS, or
IC systems. Drive immediately to a workshop
to have the system checked. Volvo recom-
mends that you seek assistance from an
authorised Volvo workshop.
Seatbelt reminder
This symbol flashes if someone in a front seat
has not put on their seatbelt or if someone in
a rear seat has taken off their seatbelt.
10
Only cars with alarm*.
03 Instruments and controls
03
}}
*
Option/accessory, for more information, see Introduction.
73
Alternator not charging
This symbol illuminates during driving if a
fault has occurred in the electrical system.
Visit a workshop. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Fault in brake system
If this symbol illuminates, the brake fluid level
may be too low. Stop the car in a safe place
and check the level in the brake fluid reser-
voir; see Brake and clutch fluid - level
(p. 367).
If the brake and ABS symbols illuminate at
the same time, there may be a fault in the
brake force distribution system.
1. Stop the car in a safe place and turn off
the engine.
2. Restart the engine.
•
If both symbols extinguish, continue
driving.
•
If the symbols remain illuminated,
check the level in the brake fluid reser-
voir; see Brake and clutch fluid - level
(p. 367). If the brake fluid level is nor-
mal but the symbols are still illumi-
nated, the car can be driven, with great
care, to a workshop to have the brake
system checked. Volvo recommends
that you seek assistance from an
authorised Volvo workshop.
WARNING
If the brake fluid is under the MIN level in
the brake fluid reservoir, do not drive fur-
ther before topping up the brake fluid.
The loss of brake fluid must be investiga-
ted by a workshop. Volvo recommends
that you contact an authorised Volvo
workshop.
WARNING
If the BRAKE and ABS symbols are lit at
the same time, there is a risk that the rear
end will skid during heavy braking.
Warning
The red warning symbol illuminates when a
fault has been indicated which could affect
the safety and/or driveability of the car. An
explanatory text is shown on the information
display at the same time. The symbol remains
visible until the fault has been rectified but the
text message can be cleared with the OK
button; see Menu navigation - combined
instrument panel (p. 113). The warning sym-
bol can also illuminate in conjunction with
other symbols.
Action:
1. Stop in a safe place. Do not drive the car
further.
2. Read the information on the information
display. Implement the action in accord-
ance with the message in the display.
Clear the message using the OK button.
Reminder – doors not closed
If one of the doors is not closed properly then
the information or warning symbol illuminates
together with an explanatory image in the
information display. Stop the car in a safe
place as soon as possible and close the door
that is open.
If the car is driven at a speed lower
than approx. 7 km/h then the informa-
tion symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
If the bonnet
11
is not closed properly then the
warning symbol illuminates together with an
explanatory image in the information display.
Stop the car in a safe place as soon as possi-
ble and close the bonnet.
If the tailgate is not closed properly then the
information symbol illuminates together with
an explanatory image in the information dis-
play. Stop the car in a safe place as soon as
possible and close the tailgate.
11
Only cars with alarm*.
||
03 Instruments and controls
03
74
Related information
•
Combined instrument panel (p. 65)
•
Combined instrument panel - meaning of
•
Digital combined instrument panel - over-
Outside temperature gauge
The display for the outside temperature gauge
appears in the combined instrument panel.
Display for outside temperature gauge,
digital instrument panel
Display for outside temperature gauge,
analogue instrument panel
When the temperature lies between +2 °C to
-5 °C a snowflake symbol illuminates in the
display. This warns of icy roads. If the car has
been stationary, the gauge may display a
reading that is too high.
Related information
•
Combined instrument panel (p. 65)
Trip meter
The trip meter display appears in the com-
bined instrument panel.
Trip meter, digital instrument panel.
Display for trip meter
12
Both trip meters
T1
and
T2
are used to meas-
ure short distances. The distance is shown in
the display.
Turn the left-hand stalk switch's thumbwheel
to show the required meter.
A long press (until the change occurs) on the
left-hand stalk switch RESET button resets
the trip meter shown. For more information,
see Trip computer - supplementary informa-
Related information
•
Combined instrument panel (p. 65)
12
Display appearance may differ depending on instrument variant.
03 Instruments and controls
03
*
Option/accessory, for more information, see Introduction.
75
Clock
The clock display appears in the combined
instrument panel.
Clock, digital instrument panel.
Display for showing the time
13
Setting the clock
The clock can be adjusted in the menu sys-
tem MY CAR, see MY CAR (p. 116).
Related information
•
Combined instrument panel (p. 65)
Fuel gauge for vehicle gas*
14
The Bi-Fuel model variant has a separate fuel
gauge for vehicle gas.
Markings above the switch show the current
fuel level.
Number of
LEDs
Colour of
LEDs
Fuel
level (%)
5
Green
100
4
Green
80
3
Green
60
2
Green
40
Number of
LEDs
Colour of
LEDs
Fuel
level (%)
1
Green
20
1
Orange
10
When the vehicle gas tank is empty the
switch sounds 3 times. The level gauge extin-
guishes and the system automatically
changes over to petrol.
Ensure that the petrol tank never runs dry
because the car always starts on petrol.
13
The time is shown in the centre of an analogue instrument panel.
14
Applies to Bi-Fuel model variant.
03 Instruments and controls
03
76
Combined instrument panel - license
agreement
A license is an agreement for the right to
operate a certain activity or the right to use
someone else's entitlement according to the
terms and conditions in the agreement. The
following text is Volvo's agreement with the
manufacturer/developer.
Combined Instrument Panel Software
Open Source Software Notice
This product uses certain free / open source
and other software originating from third
parties, that is subject to the GNU Lesser
General Public License version 2 (LGPLv2),
The FreeType Project License ("FreeType
License") and other different and/or additional
copy right licenses, disclaimers and notices.
The links to access the exact terms of
LGPLv2, and the other open source software
licenses, disclaimers, acknowledgements and
notices are provided to you below. Please
refer to the exact terms of the relevant
License, regarding your rights under said
licenses. Volvo Car Corporation (VCC) offers
to provide the source code of said free/open
source software to you for a charge covering
the cost of performing such distribution, such
as the cost of media, shipping and handling,
upon written request. Please contact your
nearest Volvo Dealer.
The offer is valid for a period of at least three
(3) years from the date of the distribution of
this product by VCC / or for as long as VCC
offers spare parts or customer support.
Portions of this product uses software
copyrighted
© 2007 The FreeType Project
(www.freetype.org). All rights reserved.
Portions of this product uses software with
Copyright
© 1994–2013 Lua.org, PUC-Rio
This product includes software under
following licenses:
LGPL v2.1: http://www.gnu.org/licenses/old-
•
GNU FriBidi
•
DevIL
The FreeType Project License: http://
git.savannah.gnu.org/cgit/freetype/
freetype2.git/tree/docs/FTL.TXT
•
FreeType 2
MIT License: http://opensource.org/licenses/
•
Lua
Symbols in the display
There are a variety of different symbols in the
display in the car. The symbols are divided
into warning, indicator and information sym-
bols.
Shown below are the most common symbols
with their meanings and a reference to where
in the manual further information can be
found.
- Red warning symbol, illuminates
when a fault has been indicated which could
affect the safety and/or driveability of the car.
An explanatory text is shown in the informa-
tion display in the combined instrument panel
at the same time.
- Information symbol, illuminates in
combination with text in the information dis-
play in the combined instrument panel, when
a deviation in any of the car's systems has
occurred. The information symbol can also
illuminate in conjunction with other symbols.
Warning symbols in the combined
instrument panel
Symbol Specification
See
Low oil pressure
Parking brake
applied
03 Instruments and controls
03
}}
*
Option/accessory, for more information, see Introduction.
77
Symbol Specification
See
Parking brake
applied, alterna-
tive symbol
Airbags – SRS
Seatbelt
reminder
Alternator not
charging
Fault in brake
system
Warning, safety
mode
Control symbols in the combined
instrument panel
Symbol Specification
See
ABL fault*
Emissions sys-
tem
ABS fault
Symbol Specification
See
Rear fog lamp on
Stability system,
ESC (Electronic
Stability Control),
Hill descent con-
trol
Stability system,
sport mode
Engine preheater
(diesel)
Low level in fuel
tank
Information, read
display text
Main beam On
Left-hand direc-
tion indicators
Right-hand
direction indica-
tors
Start/Stop*,
engine auto-
stopped
Symbol Specification
See
ECO function* on
Tyre pressure
system*
Information symbols in the combined
instrument panel
Symbol Specification
See
Cruise control*
Adaptive cruise
control*
Adaptive cruise
control*, time
interval
Adaptive cruise
control*, Distance
Warning* (Dis-
tance Alert)
Radar sensor*
-
-
-
||
03 Instruments and controls
03
78
*
Option/accessory, for more information, see Introduction.
Symbol Specification
See
Windscreen sen-
sor*, Camera sen-
sor*, Laser sen-
sor*
Auto Brake*, Dis-
tance Warning*
(Distance Alert),
City Safety
TM
,
Collision warning
system*
ABL system*
Driver Alert Sys-
tem*, Time for a
break
Driver Alert Sys-
tem*, Time for a
break
Parking brake
Rain sensor*
Active high beam,
AHB (Active High
Beam)*
Symbol Specification
See
Start/Stop*
Start/Stop*
Driver Alert Sys-
tem*, Lane Depar-
ture Warning
(LDW)
Driver Alert Sys-
tem*, Lane Depar-
ture Warning*
Driver Alert Sys-
tem*, Lane Depar-
ture Warning*
Recorded speed
information*
Engine block and
passenger com-
partment heater*
Symbol Specification
See
Engine block
heater and pas-
senger compart-
ment heater*
Service required
Activated timer*
Activated timer*
Low battery
Fuel filler flap,
right-hand side
Gear shift indica-
tor
Gear positions
Measuring the oil
level
-
-
-
03 Instruments and controls
03
}}
*
Option/accessory, for more information, see Introduction.
79
Information symbols in the roof console
display
Symbol Specification
See
Seatbelt reminder
Airbag, passenger
seat, activated
Airbag, passenger
seat, deactivated
Related information
•
Combined instrument panel - meaning of
•
Combined instrument cluster - meaning
•
Volvo Sensus
Volvo Sensus is the heart of the personal
Volvo experience and connects you with the
car and outside world. Sensus provides infor-
mation, entertainment and assistance when it
is needed. Sensus consists of intuitive func-
tions that both enhance the car journey and
simplifies ownership of the car.
An intuitive navigation structure makes it pos-
sible to receive relevant support, information
and entertainment when it is necessary, with-
out distracting the driver.
Sensus covers all the car's solutions that
enable connection* to the outside world and
provides you with intuitive control over all the
car's capabilities.
Volvo Sensus combines and presents many
functions in several of the car's systems on
the centre console's display screen. With
Volvo Sensus the car can be personalised by
means of an intuitive user interface. Settings
can be made in Car settings, Audio and
media, Climate control, etc.
With the centre console buttons and controls
or the steering wheel's right-hand keypad*
functions can be activated or deactivated and
many different settings can be made.
With a press on MY CAR all settings related
to the driving and control of the car are pre-
sented, such as City Safety, locks and alarm,
automatic fan speed, setting the clock, etc.
With a press on the respective function
RADIO, MEDIA, TEL, *, NAV* and CAM*
other sources, systems and functions can be
activated, e.g. AM, FM, CD, DVD*, TV*,
Bluetooth
®
*, navigation* and park assist cam-
era*.
For more information about all functions/
systems, see the relevant section in the
owner's manual or its supplement.
||
03 Instruments and controls
03
80
*
Option/accessory, for more information, see Introduction.
Overview
Control panel in centre console. The figure is
schematic - the number of functions and layout
of the buttons both vary, depending on the
equipment selected and the market.
Navigation* - NAV, see separate supple-
ment (Sensus Navigation).
Audio and media - RADIO, MEDIA, TEL*,
see separate supplement (Sensus Info-
tainment).
Function settings - MY CAR, see MY
CAR (p. 116).
Internet-connected car -
*, see sepa-
rate supplement (Sensus Infotainment).
Climate control system (p. 130).
Park assist camera* (p. 251) – CAM*.
Key positions
The remote control key can be used to set the
vehicle's electrical system in different modes/
levels so that different functions are available;
see Key positions - functions at different lev-
Ignition switch with remote control key extrac-
ted/inserted.
For cars with the Keyless* function the
remote control key does not need to be
inserted into the ignition switch but can be
stored in e.g. a pocket. For more informa-
tion on Keyless functions, see Keyless
Insert the remote control key
1. Hold the end of the remote control key
with the detachable key blade and insert
the remote control key in the ignition
switch.
2. Then press the remote control key in the
lock up to its end position.
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key
incorrectly turned - hold the end with the
detachable key blade, see Detachable key
blade - detaching/attaching (p. 174).
Remove the remote control key
Push the remote control key, allow it to eject,
then pull it out from the ignition switch.
03 Instruments and controls
03
}}
81
Key positions - functions at different
levels
To enable the use of a limited number of
functions with the engine switched off, the
car's electrical system can be set in 3 differ-
ent levels - 0, I and II - with the remote con-
trol key. This owner's manual describes these
levels throughout using the denomination
"key positions".
The following table shows the functions avail-
able in each key position/level.
Level Functions
0
•
Odometer, clock and tem-
perature gauge are illumi-
nated.
•
Electrically operated seats
can be adjusted.
•
The audio system can be
used for a limited time - see
the Sensus Infotainment sup-
plement.
I
•
Sunroof, power windows, 12
V socket in the passenger
compartment, navigation,
phone, ventilation fan and
windscreen wipers can be
used.
Level Functions
II
•
The headlamps come on.
•
Warning/indicator lamps illu-
minate for 5 seconds.
•
Several other systems are
activated. However, electric
heating in seat cushions and
the rear window can only be
activated after starting the
engine.
This key position consumes a
lot of current from the starter
battery and should therefore be
avoided!
Selecting key position/level
•
Key position 0 - Unlock the car - This
means that the car's electrical system is
at level 0.
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to
be selected.
||
03 Instruments and controls
03
82
*
Option/accessory, for more information, see Introduction.
•
Key position I - With the remote control
key fully inserted into the ignition switch
15
- Briefly press START/STOP ENGINE.
•
Key position II - With the remote control
key fully inserted into the ignition switch
15
- Give a long
16
press on START/STOP
ENGINE.
•
Back to key position 0 - To return to key
position 0 from position II and I - Briefly
press on START/STOP ENGINE.
Audio system
For information on audio system functions
with remote control key removed, see the
Sensus Infotainment supplement.
Starting and stopping the engine
For information about starting/stopping the
engine, see Starting the engine (p. 265).
Towing
For important information about the remote
control key during towing, see Towing
Related information
•
Seats, front
The car's front seats have different setting
options for optimum seating comfort.
Raise/lower the seat, pump up/down.
Forward/backward: lift the handle to
adjust the distance to the steering wheel
and pedals. Check that the seat is locked
after changing position.
Raise/lower* front edge of seat cushion,
pump up/down.
Adjust backrest rake, turn the wheel.
Change the lumbar support*, press the
button.
Control panel for power seat*, see Seats,
front - electrically operated* (p. 83).
WARNING
Adjust the position of the driver's seat
before setting off, never while driving.
Make sure that the seat is in locked posi-
tion in order to avoid personal injury in the
event of heavy braking or an accident.
Lowering the passenger seat backrest*
The passenger seat's backrest can be folded
forward to make room for long loads.
Move the seat as far back/down as possi-
ble.
Adjust the backrest to an upright position.
Lift the catches on the rear of the back-
rest and fold it forward.
15
Not required for cars with the Keyless* function.
16
Approx. 2 seconds.
03 Instruments and controls
03
}}
*
Option/accessory, for more information, see Introduction.
83
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
Raising takes place in reverse order.
WARNING
Grasp the backrest and make sure that it
is properly locked after being folded up in
order to avoid personal injury in the event
of sudden braking or an accident.
Related information
•
Seats, front - electrically operated*
•
Seats, front - electrically operated*
The car's front seats have different setting
options for optimum seating comfort. The
power seat can be moved forward/backward
and up/down. The front edge of the seat
cushion can be raised/lowered. The backrest
angle and lumbar support* can be changed.
Power seat
Front edge of seat cushion up/down
Raise/lower seat
Seat, forward/backward
Backrest rake
Lumbar support* is adjusted inward and
outward
The power seats have overload protection
which is tripped if a seat is blocked by an
object. If this should happen, set the car's
electrical system in key position I or 0 and
wait a short time before adjusting the seat
again.
Only one movement (forward/back/up/down/
inward/outward) can be made at a time.
Preparations
The seat can be adjusted for a certain time
after unlocking the door with the remote con-
trol key without the key in the ignition switch.
Seat adjustment is normally made in key
position I and can always be made when the
engine is running.
Seat with memory function*
The memory function stores settings for the
seat and the door mirrors.
||
03 Instruments and controls
03
84
*
Option/accessory, for more information, see Introduction.
Store setting
Memory button
Memory button
Memory button
Button for storing settings
1. Adjust the seat and the door mirrors.
2. Press and hold button M while pressing
button 1, 2 or 3 simultaneously. Hold the
buttons depressed until the acoustic sig-
nal is heard and text is shown in the com-
bined instrument panel.
The seat must be adjusted again before a
new memory can be set.
The setting for lumbar support is not stored.
Using a stored setting
Press one of the memory buttons 1-3 until the
seat and the door mirrors stop. If the button
is released, the movement of the seat and
door mirrors will be interrupted.
Key memory* in remote control key
All remote control keys can be used by differ-
ent drivers to store the settings for the driv-
er's seat and door mirrors
17
control key - personalisation* (p. 168).
Emergency stop
If the seat accidentally begins to move, press
one of the setting buttons for the seat or
memory buttons in order to stop the seat.
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
WARNING
Risk of crushing! Make sure that children
do not play with the controls. Check that
there are no objects in front of, behind or
under the seat during adjustment. Make
sure that none of the passengers in the
rear seat is in danger of becoming trap-
ped.
Heated/ventilated seats*
For heated seats/ventilated, see Heated front
seats* (p. 137) and Heated rear seat*
Related information
•
•
Seats, rear
The rear seat backrest and the outer seat
head restraints can be folded. The centre seat
head restraint can be adjusted to suit the
height of the passenger.
Head restraint, centre seat, rear
Adjust the head restraint according to pas-
senger height so that the whole of the back of
the head is covered if possible. Slide it up as
required.
To lower the head restraint again, the button
(located in the centre between the backrest
and head restraint, see illustration) must be
pressed in while the head restraint is pressed
down carefully.
17
Only if the car is equipped with power seat with memory and retractable power rearview and door mirrors. The setting for lumbar support is not stored.
03 Instruments and controls
03
}}
85
WARNING
The centre seat head restraint must be in
its lowest position when the centre seat is
not used. When the centre seat is used,
the head restraint must be correctly
adjusted to the height of the passenger so
that it covers the whole of the back of the
head if possible.
Manual lowering of the outer head
restraints, rear seat
Pull the locking handle closest to the head
restraint to fold the head restraint forward.
The head restraint is moved back manually
until a "click" can be heard.
WARNING
The head restraints must be in locked
position after being raised.
Lowering the rear seat backrest
There must be no objects on the rear seat
when the backrest is to be folded down.
The seat belts must not be connected
either. Otherwise there is a risk of damag-
ing the rear seat upholstery.
The triple-section backrest can be folded in
different ways.
The front seats may need to be pushed
forwards, and/or the backrests adjusted
upwards, in order that the rear backrests
can be fully folded forward.
•
The left-hand section can be folded sepa-
rately.
•
The centre section can be folded sepa-
rately.
•
The right-hand section can only be folded
together with the centre section.
•
If the entire backrest is to be folded then
the different sections should be folded
separately.
If the centre backrest is being lowered -
release and adjust the head restraint for
the centre backrest, see the earlier sec-
tion "Head restraint, centre seat, rear".
The outer head restraints are lowered
automatically when the outer backrests
are lowered. Pull up the backrest's lock-
ing handle
while folding the backrest
forward at the same time. A red indicator
on the lock catch
shows that the
backrest is no longer locked in place.
Raising takes place in reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст