Volvo S90 (2021 year). Manual in english — page 37
MAINTENANCE AND SERVICE
}}
* Option/accessory.
631
On the inside of the cover there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
The
fuse box in the engine compartment
also provides space for several spare fuses.
Positions
On the inside of the cover is a label that shows
the location of the fuses.
Function
Ampere
Type
Intermediate voltage module
A
10
Micro
–
–
MCase
B
–
–
Micro
Movement detector
*
5
Micro
–
–
Micro
Driver display
5
Micro
Keypad in centre console
5
Micro
Sun sensor
5
Micro
–
–
Micro
–
–
Micro
Steering wheel module
5
Micro
Module for start knob and for parking brake control
5
Micro
Steering wheel module for heated steering wheel
*
15
Micro
–
–
Micro
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
* Option/accessory.
632
Function
Ampere
Type
–
–
Micro
–
–
Micro
Rear lamp housing control unit
15
Micro
Control module for climate control system
10
Micro
Steering lock
7,5
Micro
Diagnostic socket OBDII
10
Micro
Centre display
5
Micro
Fan module for climate control system, front
40
MCase
B
USB HUB
5
Micro
Controls lighting; Interior lighting; Dimming of interior rearview mirror
*
; Rain and light sensor
*
; Keypad in tunnel con-
sole, by legroom for rear seat
*
; Power front seats
*
; Control panels in rear doors; Fan module for climate control left/right
7,5
Micro
Control module for driver support functions
5
Micro
Sunroof
*
20
Micro
Head-up display
*
5
Micro
Passenger compartment lighting
5
Micro
Wireless charging plate
5
Micro
Display in roof console (Seatbelt reminder/Indicator for airbag on the front passenger seat)
5
Micro
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
* Option/accessory.
633
Function
Ampere
Type
–
–
Micro
–
–
Micro
–
–
Micro
Fuses in cargo area
10
Micro
Control module for online car; Control module for Volvo On Call
5
Micro
Door module in left-hand rear door
20
Micro
Audio control device (amplifier)
40
MCase
B
–
–
MCase
B
Module for multi-band antenna
5
Micro
Modules for seat comfort (massage) front
*
5
Micro
Alcohol lock
*
5
Micro
–
–
Micro
Control module for fuel pump
15
Micro
Relay coil for transmission oil pump
Converter medium voltage; Integrated starter motor
5
Micro
Opening the boot lid/tailgate with foot motion
*
5
Micro
Seat heating, driver's side front
15
Micro
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
* Option/accessory.
634
Function
Ampere
Type
Seat heating, passenger side front
15
Micro
Coolant pump
7,5
Micro
–
–
Micro
Door module in left-hand front door
20
Micro
Control module for suspension (active chassis)
*
20
Micro
–
–
Micro
Sensus control module
10
Micro
–
–
MCase
B
–
–
Micro
Door module in right-hand front door
20
Micro
–
–
Micro
TV
*
(certain markets)
5
Micro
Primary fuse for fuses 52, 53, 57 and 58
15
Micro
A
Only applies to cars with 48 V support battery.
B
This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended.
Related information
•
Fuses and central electrical units (p. 623)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
* Option/accessory.
635
Fuses in cargo area
Fuses in the cargo area protect, amongst
other things, power seats
*
, airbags and seat-
belt tensioners.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
636
The central electrical unit is located on the right-hand side.
On the inside of the cover there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
The
fuse box in the engine compartment
also provides space for several spare fuses.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
* Option/accessory.
637
Positions
On the inside of the cover is a label that shows
the location of the fuses.
Function
Ampere
Type
Rear window defroster
30
MCase
A
Central electronic module
40
MCase
A
Compressor for air suspension
*
40
MCase
A
Lock motor for backrest on rear right-hand side
15
MCase
A
–
–
MCase
A
Lock motor for backrest on rear left-hand side
15
MCase
A
Door module right-hand side rear
B
20
MCase
A
Control module for reduction of nitrous oxides (diesel)
30
MCase
A
Power operated boot lid
*
25
MCase
A
Electrically operated front passenger seat
*
Door module right-hand side front
20
MCase
A
Towbar control module
*
40
MCase
A
Seatbelt pretensioner module, right-hand side
40
MCase
A
Internal relay coils
5
Micro
Control module for reduction of nitrous oxides (diesel)
15
Micro
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
* Option/accessory.
638
Function
Ampere
Type
Door module left-hand side rear
20
Micro
Alcohol lock
*
, USB hub/accessory port
5
Micro
–
–
Micro
Towbar control module
*
25
MCase
A
Accessory module
40
Power driver seat
*
Door module left-hand side front
20
MCase
A
Seatbelt pretensioner module, left-hand side
40
MCase
A
Parking camera
*
5
Micro
Rear light module back-up power supply
10
Micro
–
–
Micro
–
–
Micro
–
–
Micro
–
–
Micro
–
–
Micro
Seat heating left-hand side rear
*
15
Micro
–
–
Micro
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
* Option/accessory.
639
Function
Ampere
Type
Blind Spot Information (BLIS)
*
: control module, exterior reversing sound
5
Micro
–
–
Micro
Seatbelt pretensioner modules, left-hand side
5
Micro
Actuator for exhaust gases (petrol, certain engine variants)
5
Micro
–
–
Micro
All Wheel Drive (AWD) control module
*
15
Micro
Seat heating right-hand side rear
*
15
Micro
–
–
MCase
A
A
This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended.
B
Applicable only to cars with hybrid motors or a 48V support battery.
Related information
•
Fuses and central electrical units (p. 623)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
640
Bulb replacement
Lamp types vary depending on model and
equipment level. If a bulb
15
breaks, it can be
Contact a workshop
16
if faults occur in lamps
other than bulbs.
If a fault occurs in LED
17
lamps, the entire
lamp unit usually must be replaced.
WARNING
The car's electrical system must be in igni-
tion position
0
when replacing bulbs.
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
If an error message remains after the bro-
ken bulb has been replaced then we rec-
ommend visiting an authorised Volvo
workshop.
Outside lighting such as headlamps and
rear lamps may temporarily have conden-
sation on the inside of the lens. This is nor-
mal, all exterior lighting is designed to
withstand this. Condensation is normally
vented out of the lamp housing when the
lamp has been switched on for a time.
Related information
•
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
replacement (p. 640)
•
Replacing the dipped beam bulb (p. 642)
•
Replacing the main beam lamp (p. 643)
•
Replacing daytime running light bulb/posi-
tion lamp bulb, front (p. 643)
•
Replacing the front direction indicator
bulb (p. 644)
•
Removing the plastic cover for
bulb replacement
The bulb in the halogen headlamp can be
replaced without the help of a workshop, but
the plastic cover over the headlamp must be
removed before a bulb can be replaced.
–
Press down the pins into the plastic cov-
er's four clips using a screwdriver or simi-
lar and lift away the cover.
15
Some cars have no bulbs.
16
An authorised Volvo workshop is recommended.
17
LED (Light Emitting Diode)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
* Option/accessory.
641
Points to remember when the cover is
refitted:
•
The pin in the clip needs to be pressed
back fully before the clip is refitted in
the cover.
•
When the cover is refitted, the pin
must be pressed in until the end sur-
face is level with the surface of the clip.
Related information
•
•
Replacing the dipped beam bulb (p. 642)
•
Replacing the main beam lamp (p. 643)
•
Replacing daytime running light bulb/posi-
tion lamp bulb, front (p. 643)
•
Replacing the front direction indicator
bulb (p. 644)
•
Exterior lamp positions
The exterior lighting of the car uses a number
of different lamps. An LED
18
type lamp must
be replaced by a workshop. An authorised
Volvo workshop is recommended.
Lamps, front (car with halogen
headlamps)
Dipped beam
Main beam
Daytime running lights/position lamps
Indicator
Front fog lamps/cornering lights
*
(LED)
Lamps, rear
Fog lamp (LED)
Position lamps (LED)
Direction indicator (LED)
Position lamps (LED)
Reversing lamps (LED)
Position lamps (LED)
Brake light (LED)
Brake light - central, high-level (LED)
18
LED (Light Emmitting Diode)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
642
Related information
•
•
•
Replacing the dipped beam bulb
The dipped beam bulb in the halogen head-
lamp can be replaced without assistance
from a workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the dipped beam bulb.
2. Unplug the connector from the bulb.
3. Detach the bulb by pushing it gently
upwards and pulling it straight out.
4. Fit a new bulb in the socket. The bulb's
guide pin must be aimed straight
upwards.
5. Press in the connector.
6. Refit the headlamp's rubber cover.
Related information
•
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
replacement (p. 640)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
643
Replacing the main beam lamp
The main beam bulb in the halogen headlamp
can be replaced without assistance from a
workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the main beam bulb.
2. Detach the bulb by turning the bulb holder
upward and then pulling straight out.
3. Carefully prize the plastic cover at the con-
nector's lock lug so that the lock lug relea-
ses.
4. Unplug the connector from the bulb.
5. Replace the bulb.
6. Fit the bulb in the socket and screw in.
7. Refit the headlamp's rubber cover.
Related information
•
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
replacement (p. 640)
•
Replacing daytime running light
bulb/position lamp bulb, front
The daytime running light bulb/position lamp
bulb in the halogen headlamp can be
replaced without assistance from a work-
shop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
The bulb for the daytime running light/
position lamp is easier to access if the
main beam bulb is detached. The main
beam bulb is fitted diagonally above the
daytime running light bulb/position lamp
bulb. Detach the main beam bulb by rotat-
ing its bulb holder upwards and then pull-
ing straight out.
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
644
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the daytime running light bulb/position
lamp bulb.
2. Pull the bulb holder for the daytime run-
ning light bulb/position lamp bulb straight
out.
3. Detach the bulb by pulling it straight out.
4. Replace the bulb.
5. Fit the bulb holder into the socket and
press it into place.
6. If the main beam bulb's bulb holder has
been removed, fit it into the socket and
screw in.
7. Refit the headlamp's rubber cover.
Related information
•
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
replacement (p. 640)
•
•
Replacing the main beam lamp (p. 643)
Replacing the front direction
indicator bulb
The direction indicator bulb in the halogen
headlamp can be replaced without assistance
from a workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the indicator bulb.
2. Press the catches together and pull the
bulb holder straight out.
3. Replace with a new bulb holder with bulb.
4. Fit the bulb holder into the socket and
press it into place.
5. Refit the headlamp's rubber cover.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE AND SERVICE
}}
645
Related information
•
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
replacement (p. 640)
•
Bulb specifications
Specifications for replaceable bulbs.
Contact a workshop
19
if faults occur in lamps
other than bulbs. If a fault occurs in LED
20
lamps, the entire lamp unit usually must be
replaced.
Function
W
A
Type
Dipped beam
55
H7
Main beam
65
H9
Front direction indica-
tors
24
PY24W
PWY24W
daytime running lights/
position lamps, front
21/5
W21/5W
A
Watt
Related information
•
Exterior lamp positions (p. 641)
•
Cleaning the interior
Use cleaning agents and car care products
recommended by Volvo. Clean regularly, and
deal with stains straight away. Vacuuming is
important prior to using cleaning agents.
•
Certain items of coloured clothing (e.g.
dark jeans and suede garments) may
stain the upholstery. If this occurs, it is
important to clean and treat these
parts of the upholstery as soon as pos-
sible.
•
Never use strong solvents such as
washer fluid, pure petrol or white spirit
or concentrated alcohol to clean the
interior, since this may damage the
upholstery as well as other interior
materials.
•
Never spray the cleaning agent directly
onto components that have electrical
buttons and controls. Wipe them
instead using a moistened cloth con-
taining the cleaning agent.
•
Sharp objects and Velcro may damage
the fabric upholstery.
•
Only use cleaning agents on the type
of material for which they were
intended.
19
An authorised Volvo workshop is recommended.
20
LED (Light Emitting Diode)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
MAINTENANCE AND SERVICE
* Option/accessory.
646
Related information
•
Cleaning the centre display (p. 646)
•
Cleaning fabric upholstery and headlining
(p. 647)
•
Cleaning the seatbelts (p. 648)
•
Cleaning textile floor and entrance mats
(p. 649)
•
•
Cleaning the leather steering wheel
(p. 650)
•
Cleaning interior plastic, metal and wood
parts (p. 650)
Cleaning the centre display
Dirt, stains and grease from fingers can affect
the centre display's performance and reada-
bility. Clean the screen frequently with a
microfibre cloth.
1. Turn off the centre display with a long
press on the home button.
2. Wipe the screen with the microfibre cloth
supplied or use another microfibre cloth of
equivalent quality. Wipe the screen with a
clean and dry microfibre cloth using small
circular movements. If necessary, lightly
moisten the microfibre cloth with clean
water.
3. Activate the display with a short press on
the home button.
The microfibre cloth used to clean the cen-
tre display must be free from sand and dirt.
When cleaning the centre display, only use
gentle pressure on the screen. Heavy pres-
sure can damage the screen.
Do not spray any liquid or caustic chemi-
cals directly on the centre display. Do not
use window cleaning agent, other cleaning
agents, aerosol spray, solvents, alcohol,
ammonia or cleaning agent containing
abrasive.
Never use abrasive cloths, paper towels or
tissue paper, since they may scratch the
centre display.
Related information
•
Cleaning the interior (p. 645)
•
Cleaning fabric upholstery and headlining
(p. 647)
•
Cleaning the seatbelts (p. 648)
•
Cleaning textile floor and entrance mats
(p. 649)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст