Volvo S90 (2021 year). Manual in english — page 9
LIGHTING
* Option/accessory.
162
Using home safe lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
To activate the function:
1. Switch off the car.
2. Move the left-hand stalk switch forward
toward the instrument panel and release.
3. Get out of the car and lock the door.
> A symbol in the driver display is illumi-
nated to indicate that the function is
activated and outer lighting is switched
on: Position lamps, headlamp beams,
number plate lighting and lighting in
outer handles
*
.
The length of time that home safe lighting
remains on can be set via the centre display.
Related information
•
Adjusting light functions via the centre
display (p. 152)
•
Approach light duration (p. 162)
Approach light duration
Approach lighting is switched on when the
car is unlocked and is used to switch on the
car's lighting at a distance.
The function is activated when the remote
control key is used for unlocking. In daylight,
position lamps, interior roof lamps, floor lights
and cargo area lighting are activated. In weak
daylight or darkness, number plate lighting
and lighting in the outer handles are also acti-
vated
*
with their light source aimed towards
the ground.
The lighting stays on for approx. 2 minutes if
no doors are opened. If a door is opened
within the activation time, the time for the
interior lighting and lighting in the outer han-
dles
*
will be extended.
The function can be activated and deactivated
via the centre display.
Related information
•
Adjusting light functions via the centre
display (p. 152)
•
Using home safe lighting (p. 162)
•
Interior lighting
The passenger compartment is equipped
with several types of lighting, e.g. general
interior lighting, adjustable decor illumination
and reading lighting.
All lighting in the passenger compartment can
be switched on and off manually at least
5 minutes from when:
•
the car has been switched off and its elec-
trical system is in ignition position
0
•
the car has been unlocked but it has not
yet been started.
Front roof lighting
Controls in roof console for the front reading lamps
and passenger compartment lighting.
Reading lamp, left-hand side
Passenger compartment lighting
-------------------------------------------------------------------------------------------------------------------------------------------------------------
LIGHTING
}}
* Option/accessory.
163
Auto function for passenger compartment
lighting
Reading lamp, right-hand side
Reading lighting
The reading lamps on the right and left-hand
sides can be turned on and off by briefly press-
ing the buttons in the roof console. Brightness
is adjusted by holding the button pressed in.
Passenger compartment lighting
The floor lighting and interior roof lighting are
switched on or off with a short press on the
button in the roof console.
Auto function for passenger compartment
lighting
The automatic function is activated by a short
press on the
AUTO
button in the roof console.
With the automatic system activated, the light
indicator in the button illuminates and the pas-
senger compartment lighting is switched on
and off according to the following.
The passenger compartment lighting comes
on when:
•
The car is unlocked
•
The car is switched off
•
A side door is opened.
The passenger compartment lighting goes off
when:
•
The car is locked
•
The car is started
•
A side door is closed
•
A side door has remained open for approx.
2 minutes.
Rear roof lighting
The rear area of the car has reading lighting,
which is also used as passenger compartment
lighting.
Reading lamps above the rear seat.
The reading lamps are switched on or off by
briefly pressing the button on the lamp.
Brightness is adjusted by holding the button
pressed in.
Glovebox lighting
Glovebox lighting is switched on and off
respectively when the lid is opened or closed.
Sun visor mirror lighting
*
The lighting for the mirror in the sun visor is
switched on and off respectively when the
cover is opened or closed.
Ground lighting
*
The ground lighting is switched on or off when
the corresponding door is opened or closed.
Door sill lighting
The door sill lighting is switched on or off
when a door is opened or closed.
Lighting in cargo area
The lighting in the cargo area is switched on or
off when the boot lid is opened or closed.
Decor lighting
The ambient light is switched on when you
open the doors and is switched off when the
car is locked. The intensity of the decor light-
ing can be adapted in the centre display and
also precisely adjusted using the thumbwheel
in the instrument panel.
Ambience lights
*
The car is equipped with LEDs that make it
possible to change the colour of the light.
These lights are switched on when the car is
running. The ambience light can be adapted in
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
LIGHTING
* Option/accessory.
164
the centre display and also precisely adjusted
using the thumbwheel in the instrument panel.
Lighting in storage compartments in
doors
The lighting in the storage compartments in
the doors is switched on when you open the
doors and is switched off when the car is
locked. The brightness can be precisely
adjusted using the thumbwheel in the instru-
ment panel.
Lighting in the tunnel console's front
cup holder
The lighting in the front cup holders is
switched on when the car is unlocked and is
switched off when the car is locked. The
brightness can be precisely adjusted using the
thumbwheel in the instrument panel.
Related information
•
Adjusting interior lighting (p. 164)
•
•
•
Passenger compartment interior (p. 590)
Adjusting interior lighting
The lamps inside the car come on differently
depending on the ignition position used. The
interior lighting can be adjusted with a
thumbwheel in the instrument panel, and cer-
tain light functions can also be adjusted via
the centre display.
The thumbwheel on the
instrument panel, to the left
of the steering wheel, is used
to adjust the brightness of
the display lighting, controls
lighting, ambient decor illumi-
nation and ambience light
*
.
Adjusting ambient decor illumination
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Lights and Lighting
Interior Lighting
.
3. Choose between the following settings:
•
Under
Ambient Light Intensity
, select
from
Off
,
Low
and
High
.
•
Under
Ambient Light Level
, select
from
Reduced
and
Full
.
Adjusting ambience light
*
The car is equipped with a number of LEDs
that make it possible to change the colour of
the light. These lights are switched on when
the car is running.
Changing the brightness of the lights
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Lights and Lighting
Interior Lighting
Interior Mood
Lighting
.
3. Under
Interior Mood Light Intensity
,
select from
Off
,
Low
and
High
.
Changing the colour of the light
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Lights and Lighting
Interior Lighting
Interior Mood
Lighting
.
3. Choose between
By Temperature
and
By Colour
in order to change the colour of
the light.
With the
By Temperature
option, the
light changes according to the set passen-
ger compartment temperature.
With the
By Colour
option, the
Theme
Colours
subcategory can be used to
adjust further.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
168
Windows, glass and mirrors
The car contains several different windows,
glass panes and mirrors. Some of the win-
dows in the car are laminated.
The windscreen has laminated glass, and lami-
nated glass is available as an option for certain
other glass areas. Laminated glass is rein-
forced, which provides better protection
against break-ins and improved sound insula-
tion in the passenger compartment.
The symbol is shown on the windows where the
glass is laminated.
1
Related information
•
Pinch protection for windows and sun
blinds (p. 168)
•
•
•
Rearview and door mirrors (p. 173)
•
•
•
Using windscreen wipers (p. 179)
•
Using windscreen and headlamp washers
(p. 182)
•
Activating and deactivating the heated
windscreen
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Pinch protection for windows and
sun blinds
All power windows and sun blinds
*
have
pinch protection which is deployed if they are
blocked by any object while opening or clos-
ing.
In the event of blocking, the movement stops
and then reverses automatically to approx.
50 mm (approx. 2 inches) from the blocked
position (or to full ventilation position).
It is possible to force pinch protection when
closing has been cancelled, e.g. when ice is
formed, by continuing to press the control in
one and the same direction.
If any fault arises with the pinch protection, a
reset sequence can be tested.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function
must be reset to work properly. A reset
must take place for pinch protection to
work.
Related information
•
Reset sequence for pinch protection
(p. 169)
•
Operating power windows (p. 170)
1
Does not apply to the windscreen, which is always laminated and thus does not have this symbol.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
169
•
•
Reset sequence for pinch
protection
If a problem occurs with the electrical func-
tions for the electric windows, a reset
sequence can be tested.
Electrically-operated sun blinds
*
have a reset
sequence that can be tested if necessary.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function
must be reset to work properly. A reset
must take place for pinch protection to
work.
In the event of problems with the sunroof,
contact a workshop.
2
Reset the power window
1. Start with the window in closed position.
2. Then operate the controls in the manual
position 3 times upwards to closed posi-
tion.
> The system is initialised automatically.
If problems persist, contact a workshop.
Reset sun blind
*
1. Start with the sun blind retracted.
2. Press the control against retracting mode
for approx. 15 seconds.
> The system is initialised automatically.
Related information
•
Pinch protection for windows and sun
blinds (p. 168)
•
Operating power windows (p. 170)
•
2
An authorised Volvo workshop is recommended.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
170
Power windows
Each door has a control panel for the electri-
cally-driven power windows. The driver's
door has controls for operating all windows
and also to activate the child safety locks.
Driver's door control panel.
Electric child safety locks
*
that deactivate
the controls in the rear doors to prevent
doors or windows from being opened
from the inside.
Controls for rear windows.
Controls for front windows.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
Related information
•
Operating power windows (p. 170)
•
Pinch protection for windows and sun
blinds (p. 168)
•
Reset sequence for pinch protection
(p. 169)
Operating power windows
Using the driver's door control panel, all
power windows can be operated - using the
control panels in the other doors operates the
power window in the individual door.
The power windows are equipped with pinch
protection. If any fault arises with the pinch
protection, a reset sequence can be tested.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
171
Operating the power windows.
Operating without auto. Move one of the
controls gently up or down. The power
windows move up or down as long as the
control is held in position.
Operating with auto. Move one of the con-
trols up or down to the end position and
release it. The window runs automatically
to its end position.
In order for the power windows to be used,
the ignition position must be
I
or
II
. The power
windows can be operated for a few minutes
after the car has been switched off and after
the ignition has been switched off - although
not after a door has been opened. It is only
possible to operate one control at a time.
It can also be operated using a remote control
key or keyless opening
*
with the door handle.
WARNING
Check that children or other passengers
are not at risk of crushing when all the win-
dows are closed with a remote control key
or keyless opening
*
with a door handle.
One way to reduce the pulsating wind
noise when the rear windows are open is
to also open the front windows slightly.
The windows cannot be opened at speeds
above approx. 180 km/h (approx.
112 mph), but they can be closed.
The driver always bears responsibility for
following traffic regulations in force.
It may not be possible to operate windows
at low temperatures.
Related information
•
•
Pinch protection for windows and sun
blinds (p. 168)
•
Reset sequence for pinch protection
(p. 169)
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
172
Using the sun blind
*
The sun blinds are built into each of the rear
doors, and there is a sun blind built into the
rear parcel shelf.
Rear door – manually operated
The figure is schematic - the version may vary.
Hook with associated catch
–
Pull up the sun blind and attach it to the
hook in the upper door frame.
The window can still be opened and closed
with the sun blind up.
Rear window parcel shelf
There is an electrically operated sun blind built
on the rear window shelf.
In order that the sun blind can be operated,
the car's electrical system must be in ignition
position
II
.
It may not be possible to operate the sun
blind in low temperatures.
Operating via the centre display
Give a short tap on the
Rear
Sun Curtain
button in the
function view in the centre
display - the sun blind is
operated automatically to its
end position, up or down.
Related information
•
Pinch protection for windows and sun
blinds (p. 168)
•
Reset sequence for pinch protection
(p. 169)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
173
Rearview and door mirrors
The rearview mirrors and door mirrors can be
used to give the driver better visibility to the
rear.
Interior rearview mirror
The interior rearview mirror is equipped with
HomeLink
*
, automatic dimming
*
and com-
pass
*
.
The interior rearview mirror is adjusted by
angling it manually.
Door mirrors
WARNING
Both mirrors are bent to provide optimal
vision. Objects may appear to be further
away than they actually are.
The door mirror positions are adjusted with
the joystick in the driver's door control panel.
There are also a number of automatic settings
that can be linked to the memory function but-
tons for the power seat
*
.
Related information
•
•
•
Adjusting rearview mirror dimming
(p. 173)
•
Angling adjustment of the door mirrors
(p. 174)
•
Storing position for seat, door mirrors and
head-up display
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Adjusting rearview mirror dimming
Bright light from behind could be reflected in
the rearview mirrors and dazzle the driver.
Use dimming when disturbed by light from
behind.
Manual dimming
The interior rearview mirror can be dimmed
with a control in the mirror's lower edge.
Control for manual dimming.
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal mode by moving the
control towards the windscreen.
The control for manual dimming is not availa-
ble on mirrors with automatic dimming.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
174
Automatic dimming
*
If bright light comes from behind, the rearview
mirrors automatically dim when it is dark out-
side or when the light is limited, for example
when driving in tunnels. Automatic dimming is
always active while driving, apart from when
gearbox reverse position is selected.
When sensitivity is changed there is no
immediately noticeable change in dim-
ming, but the change takes place gradu-
ally.
Dimming sensitivity will affect both the interior
rearview mirror and the door mirrors.
To change dimming sensitivity:
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Mirrors and
Convenience
.
3. Under
Rearview Mirror Auto Dimming
,
select
Normal
,
Dark
or
Light
.
The interior rearview mirror contains two sen-
sors - one forward facing and one rearward
facing - that work together to identify and
eliminate dazzling light. The forward facing
sensor detects ambient light, while the rear-
ward facing sensor detects the light from vehi-
cle headlights behind.
For the door mirrors to be equipped with auto-
matic dimming, the interior rearview mirror
must also be equipped with automatic dim-
ming.
If the sensors are obscured by e.g. parking
permits, transponders, sun visors or
objects in the seats or on the parcel shelf in
such a way that light is prevented from
reaching the sensors, then the dimming
function of the interior rearview and door
mirrors is reduced.
Related information
•
Rearview and door mirrors (p. 173)
•
Angling adjustment of the door mirrors
(p. 174)
Angling adjustment of the door
mirrors
To ensure better visibility to the rear, the door
mirrors need to be set to the preferences of
the driver.
There are a number of automatic settings that
can also be linked to the memory function
buttons for the power seat
*
.
Using controls for door mirrors
Controls for door mirrors.
The door mirror positions are adjusted with
the joystick in the driver's door control panel.
Ignition position must be at least
I
.
1. Press the
L
button for the left-hand door
mirror or the
R
button for the right-hand
door mirror. The light in the button illumi-
nates.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
175
2. Adjust the position with the joystick in the
centre.
3. Press the
L
or
R
button again. The light
should no longer be illuminated.
Folding in rearview mirrors
electrically
*
The mirrors can be retracted for parking/driv-
ing in narrow spaces.
1. Depress the
L
and
R
buttons simultane-
ously.
2. Release them after approximately 1 sec-
ond. The mirrors automatically stop in the
fully retracted position.
Fold out the mirrors by pressing down the
L
and
R
buttons simultaneously. The mirrors
automatically stop in the extended position
with the previous setting.
Resetting to neutral
Mirrors that have been moved out of position
by an external force must be reset electrically
to their original position for electric retracting/
extending
*
to work correctly.
1. Fold in the door mirrors by pressing down
the
L
and
R
buttons simultaneously.
2. Fold them out again by pressing the
L
and
R
buttons simultaneously.
3. Repeat the above procedure as necessary.
The mirrors are returned to the original posi-
tion.
Angling during parking
3
A door mirror can be angled down for the
driver to view the side of the road when park-
ing, for example.
–
Engage reverse gear and press the
L
or
R
button.
Note that the button may need to be pressed
twice, depending on whether it was already
preselected. The button flashes when the door
mirror is angled down. When reverse gear is
disengaged, the door mirror automatically
starts to return after approx. 3 seconds and
then reaches its original position after approx.
8 seconds.
Automatic angling during parking
3
With this setting, the door mirror is automati-
cally angled down when reverse gear is
selected. The folded position is preset and
cannot be adjusted.
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Mirrors and
Convenience
.
3. Under
Exterior Mirror Tilt at Reverse
,
select
Off
,
Driver
,
Passenger
or
Both
to
activate/deactivate and to select which
review mirror should be angled.
You can make the door mirror return to its
original position by pressing the
L
or
R
button
twice.
Automatic retraction when locking
*
In the centre display, you can set all the rear-
view and door mirrors to retract/extend auto-
matically when the car is locked/unlocked
using the key.
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Mirrors and
Convenience
.
3. Select
Fold Mirror When Locked
to acti-
vate/deactivate.
If you manually fold the mirrors with the
L
and
R
buttons and then lock the car, they
will not fold out automatically when you
unlock the car, even if this setting has been
made. They must be manually folded out.
3
Only in combination with power seat with memory buttons
*
.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
176
Related information
•
Rearview and door mirrors (p. 173)
•
Adjusting rearview mirror dimming
(p. 173)
•
Storing position for seat, door mirrors and
head-up display
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Sunroof
*
The sunroof can be opened vertically at the
rear edge (ventilation position) or horizontally
(open position).
The sunroof has a wind deflector. There is
also an inner sunscreen that is closed man-
ually.
The sunroof is operated with a control located
in the roof. The control is activated when the
car's electrical system is in ignition position
I
or
II
.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
•
Do not open the sunroof when load
carriers are fitted.
•
Do not place any heavy objects on the
sunroof.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
177
•
Remove ice and snow before opening
the sunroof. Take care not to scratch
surfaces or damage strips.
•
Do not operate the sunroof if it has fro-
zen closed.
Wind deflector
The sunroof has a wind deflector that is folded
up when the sunroof is in the open position.
Related information
•
•
Pinch protection for windows and sun
blinds (p. 168)
•
•
Locking and unlocking with the remote
control key (p. 246)
Operating the sunroof
*
When operating with the control that is fitted
in the roof, the sunroof is first opened hori-
zontally to a comfort position.
In ventilation position, the sunroof is raised at
the rear edge.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
•
Do not open the sunroof when load
carriers are fitted.
•
Do not place any heavy objects on the
sunroof.
•
Remove ice and snow before opening
the sunroof. Take care not to scratch
surfaces or damage strips.
•
Do not operate the sunroof if it has fro-
zen closed.
Opening, manual
Opening, automatic
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
178
Closing, manual
Closing, automatic
The movement of the sunroof is stopped if the
control is released during manual operation, or
when the sunroof reaches the comfort posi-
tion or the maximum opening or closing posi-
tion. The movement is also stopped if the con-
trol is operated again while the movement is in
progress.
In order that the sunroof can be operated, the
car's electrical system must be in ignition
position
I
or
II
.
It can also be operated using a remote control
key or keyless opening
*
with the door handle.
WARNING
Check that children or other passengers
are not at risk of crushing when all the win-
dows are closed with a remote control key
or keyless opening
*
with a door handle.
Check that the sunroof is properly closed
when closing.
Manual operation
–
To open the sunroof, press the control
rearward to the position for manual open-
ing. The sunroof first reaches comfort
position.
4
In order to open to maximum
opening position – press the control back-
wards a second time.
Close the sunroof by repeating the preceding
procedure in reverse order - press the control
forward/downward to the manual closing
position instead.
Automatic operation
–
To open the sunroof, press the control
backwards to the position for automatic
opening and release. The sunroof first rea-
ches comfort position.
4
To open to the
maximum opening position – press the
control a second time backward to the
position for automatic opening and
release.
Close the sunroof by repeating the preceding
procedure in reverse order - press the control
forward/downward to the automatic closing
position instead.
The sunroof does not stop at comfort position
during closing.
It may not be possible to operate windows
at low temperatures.
Ventilation position
Ventilation position, vertically at the rear edge.
Open by pressing the control upward.
Close by pressing the control forward/
downward.
When ventilation position is selected, the sun-
roof is raised at the rear edge.
Sunscreen
The sunroof features a manual, sliding interior
sunscreen. The sunscreen slides back auto-
matically when the sunroof is opened. Grip the
4
Comfort position is an open position for the sunroof, where wind noise and resonance noise are at a comfortably low level while driving.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
179
handle and slide the sunscreen forward to
close it.
Related information
•
•
Pinch protection for windows and sun
blinds (p. 168)
•
•
Locking and unlocking with the remote
control key (p. 246)
Wiper blades and washer fluid
Together with the washer fluid, the wipers
aim to improve visibility as well as headlamp
pattern.
The washer nozzles are heated
*
automatically
in cold weather to prevent the washer fluid
from freezing.
Information indicating that the washer fluid
needs topping up appears in the driver display
when there is approx. 1 litre (1 qt) of washer
fluid remaining.
Related information
•
Using the rain sensor (p. 180)
•
Using windscreen and headlamp washers
(p. 182)
•
Activating and deactivating the rain sen-
sor's memory function (p. 181)
•
•
Set the wiper blades in service position
(p. 660)
•
Replacing windscreen wiper blades
(p. 659)
•
Using windscreen wipers (p. 179)
Using windscreen wipers
The windscreen wipers are designed to clean
the windscreen. Different settings for the
windscreen wipers are set using the right-
hand stalk switch.
Right-hand stalk switch.
The thumbwheel is used to set rain sensor
sensitivity and wiper swipe frequency.
Single sweep
Lower the stalk switch and release to
make one sweep.
Windscreen wipers off
Move the stalk switch to position
0
to
switch off the windscreen wipers.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст