Volvo XC40 (2019 year). Instruction — part 18
DRIVER SUPPORT
314
Rear Collision Warning
The Rear Collision Warning (RCW) function can
help the driver avoid rear-end collisions from
vehicles approaching from behind.
RCW is automatically activated each time the
engine is started.
RCW can warn the driver of a potential collision
with vehicles approaching from behind by rapidly
flashing the turn signals.
If, at a speed below 30 km/h (20 mph), the RCW
function detects that the car is in danger of being
hit from behind, the seatbelt tensioners may ten-
sion the front seatbelts and activate the Whiplash
Protection System safety system.
Immediately before a collision from behind, RCW
may also activate the foot brake in order to
reduce the forward acceleration of the car during
the collision. However, the brakes will only be
applied if your vehicle is stationary. The brakes
will be immediately released if the accelerator
pedal is depressed.
Related information
•
Rear Collision Warning limitations (p. 314)
•
Whiplash Protection System (p. 46)
Rear Collision Warning limitations
In some situations, it may be difficult for RCW to
warn the driver of a collision risk.
This may be the case if:
•
the vehicle approaching from the rear is
detected at a late stage
•
the vehicle approaching from the rear
changes lanes at a late stage
•
the vehicle approaching from the rear is mov-
ing at a speed above 80 km/h (50 mph)
•
a trailer, bicycle holder or similar is con-
nected to the vehicle's electrical system - the
RCW function will then be automatically
deactivated.
In certain markets RCW does not warn with
the direction indicators due to local traffic
regulations – in such cases, that part of the
function is deactivated.
The warning with direction indicators for Rear
Collision Warning is deactivated if the colli-
sion warning distance in the City Safety func-
tion is set to the lowest level "
Late
".
The seat belt tensioning and braking func-
tions remain active.
Related information
•
DRIVER SUPPORT
}}
* Option/accessory.
315
BLIS
*
The BLIS
69
function is designed to help provide
assistance in heavy traffic with several lanes
moving in the same direction by helping the
driver to detect the presence of vehicles in the
"blind spot" area behind and to the side of the
vehicle.
BLIS is a driver support system designed to alert
the driver of:
•
vehicles in your "blind spot"
•
vehicles approaching rapidly in adjacent
lanes.
Location of BLIS indicator light.
70
Indicator light
The BLIS button in the center display's Func-
tion view is used to activate/deactivate the
function.
BLIS overview
Blind spot zone
Rapidly approaching vehicle zone.
The BLIS function is active at speeds
above 10 km/h (6 mph).
The system is designed to react to:
•
vehicles passing your vehicle
•
vehicles that are rapidly approaching your
vehicle from behind.
When BLIS detects a vehicle in zone 1 or a rap-
idly approaching vehicle in zone 2, an indicator
light will illuminate in the relevant rearview mirror
and glow steadily. If the driver then uses the turn
signal on the side in which the warning has been
69
Blind Spot Information Systems
70
Note: This illustration is general and details may vary depending on model.
||
DRIVER SUPPORT
316
given, the indicator light will become brighter and
begin flashing.
The light illuminates on the side of the vehicle
where the system has detected the vehicle. If
the vehicle is passed on both sides simulta-
neously, both lights come on.
WARNING
•
The BLIS function is supplementary driver
support intended to facilitate driving and
help make it safer – it cannot handle all
situations in all traffic, weather and road
conditions.
•
The responsibility for changing lanes
safely and using good judgment always
rests with the driver.
•
BLIS is not a substitute for the driver's
attention and judgment. The driver is
always responsible for ensuring the vehi-
cle is driven in a safe manner, at the
appropriate speed, with an appropriate
distance to other vehicles, and in accord-
ance with current traffic rules and regula-
tions.
Related information
•
Activating/deactivating BLIS (p. 316)
•
•
Recommended maintenance for BLIS
(p. 318)
•
Activating/deactivating BLIS
The BLIS
71
function can be activated/deacti-
vated.
Location of BLIS indicator light.
72
Indicator light
The BLIS button in the center display's Func-
tion view is used to activate/deactivate the
function.
–
Tap the
BLIS
button in Function view.
> The BLIS indicator light shows the status
of the function: GREEN (on) or GRAY
(off).
If BLIS is activated when the engine is started,
the indicator lights in the rearview mirrors will
flash once.
If BLIS is deactivated when the engine is turned
off, it will remain off the next time the engine is
started and the indicator lights will not illuminate.
DRIVER SUPPORT
* Option/accessory.
317
Related information
•
BLIS limitations
BLIS
73
functionality may be reduced in certain
situations.
Keep this area clean (on both the left and right sides of
the vehicle)
74
.
Examples of limitations:
•
Dirt, ice and snow covering the sensors may
reduce functionality and prevent the system
from providing warnings.
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle holder or similar is
connected to the vehicle's electrical system.
•
For BLIS to function optimally, bicycle hold-
ers, luggage racks or similar should not be
mounted on the vehicle's towbar.
WARNING
•
BLIS does not work in sharp curves.
•
BLIS does not work when the vehicle is
being reversed.
Related information
•
71
Blind Spot Information
72
Note: This illustration is general and details may vary depending on model.
73
Blind Spot Information
74
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
318
Recommended maintenance for
BLIS
•
For optimal performance, it is important to
keep the areas in front of the sensors clean.
•
Do not attach any objects, tape or decals to
the surface of the sensors.
Keep this area clean (on both the left and right sides of
the vehicle)
75
.
The BLIS sensors are located on the inside of
each of the rear fenders/bumpers and are also
used by the Cross Traffic Alert (CTA) and Rear
Collision Warning functions.
Repair of BLIS and CTA components or
repainting of the bumper may only be per-
formed by a workshop – an authorized Volvo
workshop is recommended.
Related information
•
•
•
Activating/deactivating Cross Traffic Alert
(p. 321)
•
Cross Traffic Alert limitations (p. 321)
•
Recommended maintenance for Cross
Traffic Alert (p. 322)
•
Cross Traffic Alert messages (p. 324)
•
Rear Collision Warning (p. 314)
75
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
319
BLIS messages
A number of messages related to BLIS
76
may
be displayed in the instrument panel.
Some examples of symbols and messages are shown in the table below.
Message
Meaning
Blind spot sensor
Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is recommended.
Blind spot system off
Trailer attached
BLIS and CTA have been deactivated because a trailer has been connected to the vehicle's electrical system.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
76
Blind Spot Information
DRIVER SUPPORT
* Option/accessory.
320
Cross Traffic Alert
*
CTA
77
with auto brake is a supplementary
driver support system to BLIS
78
that is intended
to help the driver detect vehicles crossing
behind the vehicle while backing up. The auto-
brake subfunction can stop the car in the event
of a risk of collision with an unobserved vehicle.
CTA overview.
CTA supplements BLIS by detecting traffic cross-
ing from the side, e.g. when backing out of a
parking space.
CTA is primarily designed to detect vehicles, but
in certain cases can also detect pedestrians or
smaller objects such as bicycles.
CTA is only active when the vehicle is moving
backward or if reverse gear is engaged.
If CTA detects that something is approaching
your vehicle from the side:
•
an audible signal will sound from either the
left or right speaker, depending on which
side of your vehicle the object is approaching
from.
•
an icon will illuminate in the PAS
79
graphic
on the screen.
•
an icon will appear in the Park Assist Cam-
era's Top view.
Illuminated CTA icon in the PAS
79
graphic
80
on the
screen.
•
If the driver does not pay attention to the
warning from CTA and a collision is unavoid-
able, the auto brake function will intervene
to stop the vehicle and a text will be shown
on the instrument panel to explain why the
vehicle was braked.
77
Cross Traffic Alert
78
Blind Spot Information
79
Park Assist System: Parking assistance with reversing sensors
80
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
}}
* Option/accessory.
321
WARNING
•
The Cross Traffic Alert function is supple-
mentary driver support intended to facili-
tate driving and help make it safer – it
cannot handle all situations in all traffic,
weather and road conditions.
•
The auto-brake subfunction can only
detect and apply the brakes for other
moving vehicles - not for e.g. stationary
obstacles, cyclists or pedestrians.
•
The responsibility for reversing the vehicle
safely and using good judgment always
rests with the driver.
•
Cross Traffic Alert is not a substitute for
the driver's attention and judgment. The
driver is always responsible for ensuring
the vehicle is driven in a safe manner, at
the appropriate speed, with an appropri-
ate distance to other vehicles, and in
accordance with current traffic rules and
regulations.
Related information
•
Activating/deactivating Cross Traffic Alert
(p. 321)
•
Cross Traffic Alert limitations (p. 321)
•
Recommended maintenance for Cross
Traffic Alert (p. 322)
•
Cross Traffic Alert messages (p. 324)
Activating/deactivating Cross Traffic
Alert
The driver can select to switch off the warning
in the function CTA
81
- the subfunction auto
brake cannot be switched off and continues to
be active. To do so:
Press the
Cross Traffic Alert
button in the center display's
Function view.
•
GRAY button indication - warning signal and
indication on display for CTA is deactivated.
•
GREEN button indicator light - CTA is acti-
vated.
CTA is automatically activated each time the
engine is started.
Related information
•
Cross Traffic Alert limitations
The CTA
82
function with auto brake may have
limited functionality in certain situations.
CTA does not function optimally in all situations
and has certain limitations. The CTA sensors, for
example, cannot "see" through other parked
vehicles or objects blocking the vehicle.
Below are a few examples of situations in which
CTA's field of vision may be initially limited and
approaching vehicles may therefore not be
detected until they are very close to your vehicle:
The vehicle is parked very far into a parking space.
||
DRIVER SUPPORT
* Option/accessory.
322
In a diagonal parking space, CTA may be completely
"blind" on one side of your vehicle.
CTA's blind zone.
CTA's field of vision.
However, as you back your vehicle slowly out of a
parking space, CTA's field of vision changes in
relation to the obstructing vehicle/object and its
blind zone is reduced.
Examples of further limitations
•
The auto brake sub-function only detects
vehicles in motion and may therefore not
"see" and brake for e.g. stationary obstacles,
a cyclists or a pedestrian.
•
Dirt, ice and snow covering the sensors may
reduce functionality and prevent the system
from providing warnings. For additional infor-
mation, see the section "Recommended
maintenance for Cross Traffic Alert".
•
CTA is automatically deactivated if a trailer,
bicycle holder or similar is connected to the
vehicle's electrical system.
•
For CTA to function optimally, bicycle hold-
ers, luggage racks or similar should not be
mounted on the vehicle's towbar.
Related information
•
Recommended maintenance for
Cross Traffic Alert
•
For optimal performance, it is important to
keep the areas in front of the sensors clean.
•
Do not attach any objects, tape or decals to
the surface of the sensors.
Keep this area clean (on both the left and right sides of
the vehicle)
83
.
The CTA sensors are located on the inside of
each of the rear fenders/bumpers and are also
81
Cross Traffic Alert
82
Cross Traffic Alert
83
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
323
used by the BLIS
84
and Rear Collision Warning
functions.
Repair of BLIS and CTA components or
repainting of the bumper may only be per-
formed by a workshop – an authorized Volvo
workshop is recommended.
Related information
•
•
•
Rear Collision Warning (p. 314)
84
Blind Spot Information
DRIVER SUPPORT
* Option/accessory.
324
Cross Traffic Alert messages
A number of messages related to CTA
85
with
auto brake can be shown in the instrument
panel.
Some examples of symbols and messages are shown in the table below.
Message
Meaning
Blind spot sensor
Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is recommended.
Blind spot system off
Trailer attached
BLIS and CTA have been deactivated because a trailer has been connected to the vehicle's electrical system.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
85
Cross Traffic Alert
DRIVER SUPPORT
* Option/accessory.
325
Road Sign Information
*
The Road Sign Information (RSI
86
) function noti-
fies the driver of speed-related road signs the
vehicle is passing.
Examples of signs that can be detected
87
.
If the vehicle passes a speed limit sign, it will be
displayed in the instrument panel.
In certain markets, the Road Sign Information
function (RSI) is only available in combination
with Sensus Navigation.
WARNING
•
The Road Sign Information function is
supplementary driver support intended to
facilitate driving and help make it safer –
it cannot handle all situations in all traffic,
weather and road conditions.
•
Road Sign Information is not a substitute
for the driver's attention and judgment.
The driver is always responsible for
ensuring the vehicle is driven in a safe
manner, at the appropriate speed, with an
appropriate distance to other vehicles,
and in accordance with current traffic
rules and regulations.
Related information
•
Activating/deactivating Road Sign Informa-
tion (p. 326)
•
Road Sign Information and sign displays
(p. 326)
•
Road Sign Information and Sensus
Navigation (p. 327)
•
Road Sign Information with Speed Warning
and Settings (p. 327)
•
Activating/deactivating Speed Warning in
Road Sign Information (p. 328)
•
Road Sign Information with speed camera
information (p. 329)
•
Road Sign Information limitations (p. 329)
86
Road Sign Information
87
Road signs differ according to market
‒ the illustrations shown here are just some examples.
DRIVER SUPPORT
* Option/accessory.
326
Activating/deactivating Road Sign
Information
The Road Sign Information function can be
switched On or Off.
Press the
Road Sign
Information
button in the cen-
ter display's Function view.
•
GREEN button indicator light - RSI is acti-
vated.
•
GRAY button indicator light - RSI is deacti-
vated.
•
If the Automatic Speed Limiter function is
activated, road sign information is shown
in the driver display even if RSI is not
activated.
•
To remove road sign information from the
driver display, you must deactivate both
Automatic Speed Limiter and RSI.
•
When the Automatic Speed Limiter func-
tion is activated but RSI is deactivated, no
warnings are given from RSI. In this situa-
tion, settings for RSI cannot be adjusted
either - to be able to adjust settings as
well as receive warnings, RSI must be
activated.
Related information
•
Road Sign Information and sign
displays
Road Sign Information (RSI
88
) displays road
signs in different ways depending on the sign
and situation.
Example
89
of registered speed information.
When RSI has registered a speed limit sign, the
sign will be displayed as a symbol in the instru-
ment panel and a RED marking will be shown in
the speedometer's speed scale.
88
Road Sign Information
89
Road signs differ according to market
‒ the illustrations shown here are just examples.
DRIVER SUPPORT
}}
* Option/accessory.
327
Signs for "School" and "Children
playing"
If the warning sign
89
"School"
or "Children playing" is
included in the satellite naviga-
tor's map data
90
, a symbol of
this type will be displayed in the
instrument panel.
Related information
•
Road Sign Information and Sensus
Navigation
If the vehicle is equipped with Sensus Navigation,
speed-related information will be provided in the
following situations:
•
In cases where the speed limit is given indi-
rectly, e.g. signs for highways or other major
roads.
•
If a previously detected speed sign is
deemed to be no longer valid and no new
sign has been passed.
In certain markets, the Road Sign Information
function (RSI) is only available in combination
with Sensus Navigation.
If a downloaded third-party app is used for
navigation, there is no support for speed-rela-
ted information.
Related information
•
Road Sign Information with Speed
Warning and Settings
The
Speed Limit Warning
sub-function for
RSI
91
can be switched On or Off.
Speed Limit Warning
alerts the driver if the
vehicle's speed has exceeded the applicable
speed limit or the preset Speed Limiter speed.
The warning will be repeated once if the driver
does not slow down.
When Speed Warning is acti-
vated, the symbol for the cur-
rent speed limit in the instru-
ment panel
92
will flash tempo-
rarily if that speed is exceeded.
The driver can be alerted if the
vehicle is exceeding a detected
speed limit and is approaching
a speed camera.
89
Road signs differ according to market
‒ the illustrations shown here are just examples.
90
Only vehicles with Sensus Navigation.
91
Road Sign Information
92
Road signs differ according to market
‒ the illustration shown here is just an example.
||
DRIVER SUPPORT
* Option/accessory.
328
Settings
Adjusting the Speed Warning limit
The driver can adjust the settings to be alerted at
a higher speed than the posted speed limit.
To adjust the Speed Warning limit:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Mark
Speed Limit Warning
.
> The function is activated and a speed limit
selector is displayed.
3. Tap the up/down arrows on the screen to
adjust the speed at which the Speed Warn-
ing will be given.
Please note that the set warn-
ing limit will not be used when
a speed camera symbol is dis-
played in the instrument panel.
Audible alert On/Off
An audible alert can also be given along with the
Speed Warning.
To adjust the audible alert settings:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Select/deselect
Road Sign Audio Warning
to activate/deactivate the audible alert.
When
Road Sign Audio Warning
is activated,
the driver will also be alerted if the vehicle is
approaching a one-way/"no-entry" road or
entrance.
Related information
•
Activating/deactivating Speed
Warning in Road Sign Information
To activate the
Speed Limit Warning
sub-func-
tion:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Mark
Speed Limit Warning
.
> The function is activated and a speed limit
selector is displayed.
(see description for "selecting speed
limit" in section "Road Sign Information
with Speed warning and Settings")
Related information
•
•
Road Sign Information with Speed Warning
and Settings (p. 327)
DRIVER SUPPORT
}}
* Option/accessory.
329
Road Sign Information with speed
camera information
Vehicles equipped with RSI
93
and Sensus
Navigation
* can provide information on upcom-
ing speed cameras in the instrument panel.
Speed camera information in the instrument panel
94
.
If the vehicle exceeds a
detected speed limit with the
Speed Warning function acti-
vated, the driver is given a
speed warning when the vehi-
cle is approaching a speed
camera if the navigation map
for the vehicle's current location contains infor-
mation on speed cameras.
For more information on Speed Warnings in con-
junction with speed cameras, see "Road Sign
Information with Speed Warning and settings"
and "Road Sign Information limitations".
•
For an audible alert to be provided if the
speed is exceeded, the
Speed Limit
Warning
function must be activated and
the
Road Sign Audio Warning
sub-
function must be On. Audible alerts are
provided if the vehicle's speed exceeds
the speed displayed by RSI in the instru-
ment panel.
•
Information about speed cameras on the
navigation map is not available for all
markets/areas.
Related information
•
•
Road Sign Information with Speed Warning
and Settings (p. 327)
•
Road Sign Information limitations (p. 329)
Road Sign Information limitations
Road Sign Information (RSI
95
) functionality may
be reduced in certain situations.
RSI could have reduced functionality due to e.g.:
•
faded road signs
•
signs located in a curve in the road
•
twisted or damaged signs
•
signs positioned high above the road
•
fully/partially obstructed or poorly positioned
signs
93
Road Sign Information
94
Note: This illustration is general and details may vary depending on model and market/region.
95
Road Sign Information
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст