Volvo S60 Recharge Plug-in Hybrid (2021 year). Manual in english — page 4
||
SAFETY
76
Securing a child seat
1. Place the child restraint on the rear seat.
2. Route the top tether strap under the head
restraint and attach it to the anchor.
3. Attach the strap for the lower tether
anchors in the lower ISOFIX/LATCH
attachment points. If the child restraint is
not equipped with straps for the lower
tether anchors, or if the child restraint is
used on the center seating position, follow
the instructions for attaching a child
restraint using the automatic locking seat
belt.
4. Firmly tension all straps.
Refer also to the child seat manufacturer's
instructions for information on securing the
child seat.
WARNING
•
Always refer to the recommendations
made by the child restraint manufac-
turer.
•
Volvo recommends that the top tether
anchors be used when installing a for-
ward-facing child restraint.
•
Never route a top tether strap over the
top of the head restraint. The strap
should be routed beneath the head
restraint.
•
Child restraint anchorages are
designed to withstand only those loads
imposed by correctly fitted child
restraints. Under no circumstances are
they to be used for adult seat belts or
harnesses. The anchorages are not able
to withstand excessive forces on them
in the event of collision if full harness
seat belts or adult seat belts are instal-
led to them. An adult who uses a belt
anchored in a child restraint anchorage
runs a great risk of suffering severe
injuries should a collision occur.
•
Do not install rear speakers that require
the removal of the top tether anchors
or interfere with the proper use of the
top tether strap.
Related information
•
•
Lower child seat attachment points
(p. 77)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SAFETY
}}
77
Lower child seat attachment points
The rear seats are equipped with lower child
seat attachment points.
The lower child seat attachment points are
intended for use with certain rear-facing child
restraints.
Always follow the manufacturer's installation
instructions when attaching a child seat to the
lower child seat attachment points.
Location of child seat attachment
points
Location of child seat attachment points in the rear
seat.
The child seat attachment points in the rear
seat are located on the rear section of the
front seat floor rails.
Related information
•
•
•
ISOFIX/LATCH lower anchors (p. 77)
ISOFIX/LATCH lower anchors
Lower anchors for ISOFIX/LATCH-equipped
child seats are located in the rear, outboard
seats, hidden below the backrest cushions.
Using the ISOFIX/LATCH lower child
seat anchors
Location of the ISOFIX/LATCH anchors
Symbols on the seat back upholstery mark the
ISOFIX/LATCH anchor positions as shown. To
access the anchors, kneel on the seat cushion
and locate the anchors by feel. Always follow
your child seat manufacturer's installation
instructions, and use both ISOFIX/LATCH
lower anchors and top tethers whenever pos-
sible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
SAFETY
78
To access the anchors
1. Put the child restraint in position.
2. Kneel on the child restraint to press down
the seat cushion and locate the anchors
by feel.
3. Fasten the attachment on the child
restraint's lower straps to the ISOFIX/
LATCH lower anchors.
4. Firmly tension the lower child seat straps
according to the manufacturer's instruc-
tions.
WARNING
Volvo's ISOFIX/LATCH anchors conform to
FMVSS/CMVSS standards. Always refer
to the child restraint system's manual for
weight and size ratings.
•
The rear center seat is not equipped
with ISOFIX/LATCH lower tether
anchors. If a child restraint is used in
this seat, attach the restraint's upper
anchor strap (if equipped with these)
to the top tether anchor point for this
strap and secure the child restraint
with the vehicle's center seat belt.
•
Always follow your child seat manufac-
turer's installation instructions, and use
both ISOFIX/LATCH lower anchors
and top tethers whenever possible.
Fasten the attachment correctly to the ISOFIX/
LATCH lower anchors
WARNING
•
Be sure to fasten the attachment cor-
rectly to the anchor (see the illustra-
tion). If the attachment is not correctly
fastened, the child restraint may not be
properly secured in the event of a colli-
sion.
•
The ISOFIX/LATCH lower child
restraint anchors are only intended for
use with child seats positioned in the
outboard seating positions. These
anchors are not certified for use with
any child restraint that is positioned in
the center seating position. When
securing a child restraint in the center
seating position, use only the vehicle's
center seat belt.
Related information
•
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
80
Displays and controls by the driver
in a left-hand drive vehicle
The overviews show the location of the vehi-
cle's displays and controls.
Steering wheel and dashboard
Parking lights, daytime running lights, low
beams, high beams, turn signals, rear fog
light, trip computer reset
Steering wheel paddles for manual shift-
ing
*
Head-up display
*
Instrument panel
Wipers and washers, rain sensor
*
Right-side steering wheel keypad
Steering wheel adjustment
Horn
Left-side steering wheel keypad
Hood open
Display lighting, trunk lid unlock/open,
halogen headlight height adjustment
Ceiling console
Front reading lights and courtesy lighting
Panoramic roof
*
Ceiling console display
ON CALL
button
HomeLink
®
*
Center and tunnel console
Center display
Hazard warning flashers, defrosting,
media
Gear selector
Start knob
Drive modes
Parking brake
Auto-hold brakes
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
81
Driver's door
Memory for power front seat settings
*
,
door mirrors and head-up display
*
Central locking
Power windows, door mirrors, electric
child locks
*
Controls for front seat
Related information
•
•
•
Adjusting the steering wheel (p. 193)
•
Lighting control and panel (p. 150)
•
•
•
Center display overview (p. 108)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
82
Instrument panel
The instrument panel displays information
related to the vehicle and driving.
The instrument panel contains gauges, indica-
tors and monitoring and warning symbols.
What is shown in the instrument panel varies
depending on the equipment, settings and
functions currently active.
The instrument panel is activated as soon as a
door is opened, i.e. in ignition mode
0
. The
panel will power down after a short period of
time if it is not used. To reactivate it, do one of
the following:
•
Depress the brake pedal.
•
Activate ignition mode
I
.
•
Open one of the doors.
WARNING
If the instrument panel turns off, does not
activate when the ignition is switched on,
or part/all of the panel cannot be read, do
not drive the vehicle. Consult a workshop
immediately. Volvo recommends an
authorized Volvo workshop.
WARNING
If the instrument panel is not functioning
properly, information about brakes, airbags
or other safety-related systems may not be
displayed. The driver will then not be able
to check the status of the vehicle systems
or receive relevant warnings and informa-
tion.
The illustration is generic - details may vary accord-
ing to vehicle model.
Location in the instrument panel:
Left side
In the center
Right side
Speedometer
Indicator and warning symbols
Tachometer/Hybrid gauge
A
Trip odometer
Ambient temperature sensor
Gear indicator
Odometer
B
Clock
Drive Mode
Cruise control/speed limiter information
Message (also graphics in some cases)
Fuel gauge
Road sign information
*
Door and seat belt status
Hybrid battery gauge
–
Hybrid battery's charge level
Distance to empty tank
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
83
Left side
In the center
Right side
–
Media player
Distance to discharged battery
–
Navigation system map
*
Current fuel consumption
–
Phone
App menu (activated using steering wheel keypad)
–
Voice Control
–
A
Depends on selected drive mode.
B
Total distance.
Dynamic symbol
Dynamic symbol in basic
mode.
In the center of the instrument panel is a
dynamic symbol that changes appearance
according to the type of message displayed.
The severity of the control or warning symbol
is indicated by a red or amber-colored marking
around the symbol.
Example with indicator symbol.
An animation may be used to change the sym-
bol into a graphic image to depict the location
of a problem or to clarify information.
Related information
•
Instrument panel settings (p. 84)
•
Indicator and warning symbols (p. 93)
•
•
Messages in the instrument panel
(p. 104)
•
Handling the App menu in the instrument
panel (p. 103)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
84
Instrument panel settings
Display settings for the instrument panel can
be set in the instrument panel's App menu
and in the center display's Settings menu.
Settings via instrument panel's app
menu
The illustration is generic - details may vary accord-
ing to vehicle model.
The app menu will open and can be controlled
using the right-side steering wheel keypad.
The app menu can be used to set what infor-
mation will be displayed in the instrument
panel
•
trip computer
•
media player
•
phone
•
navigation system
*
.
Settings via center display
Selecting type of information
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Displays
Driver Display
Information
.
3. Select a background:
•
Show no information in the
background
•
Show information for current
playing media
•
Show navigation even if no route is
set
Select theme
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Displays
Display
Themes
3. Select a theme (appearance) for the
instrument panel:
•
Glass
•
Minimalistic
•
Performance
•
Chrome Rings
Select language
1. Tap
Settings
in the center display's Top
view.
2. Tap
System
System Languages and
Units
System Language
to select lan-
guage.
> A change made here will affect the lan-
guage in all displays.
The settings are personal and saved automati-
cally in the active driver profile.
Related information
•
•
Handling the App menu in the instrument
panel (p. 103)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
85
Fuel gauge
The fuel gauge in the instrument panel shows
the fuel level in the tank.
The illustration is generic - details may vary accord-
ing to vehicle model.
The beige area in the fuel gauge indicates the
amount of fuel left in the tank.
When the fuel level is low, the fuel pump sym-
bol will illuminate with an amber-colored light.
The trip computer also indicates the approxi-
mate distance that can be driven on the fuel
remaining in the tank.
Related information
•
•
•
•
Hybrid gauge
In Hybrid and Pure drive modes, the instru-
ment panel will display a hybrid gauge, which
can help the driver achieve optimal driving
economy.
The hybrid gauge shows the ratio between the
electric motor's current power consumption
and the remaining available power. This infor-
mation is shown in various ways.
Symbols in the hybrid gauge
Indicates the current available power
from the electric motor. A solid sym-
bol indicates that the electric motor
is being used.
A hollow symbol indicates that the
electric motor is not being used.
Indicates the power level when the
internal combustion engine starts. A
solid symbol indicates that the inter-
nal combustion engine is being used.
Indicates the power level when the
internal combustion engine will start.
A hollow symbol indicates that the
internal combustion engine is not
being used.
Indicates that the hybrid battery is
being charged e.g. by lightly press-
ing the brake pedal.
Driver-requested power
The hybrid gauge displays the amount of
power requested (utilized) by the driver
through pressure on the accelerator pedal. The
higher the reading on the scale, the more
power utilized in the current gear. The mark
between the lightning symbol and the drop
symbol indicates the point at which the com-
bustion engine will start.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
86
For example:
The vehicle has been started, but is stationary and no
power is being requested.
The electric motor cannot supply the requested
power and the internal combustion engine will start.
The vehicle is generating current to recharge the bat-
tery, e.g. during light braking or engine braking on a
downslope.
Related information
•
•
•
•
•
Starting and stopping the combustion
engine (p. 429)
Hybrid battery gauge
The hybrid battery gauge shows how much
current is left in the hybrid battery.
The current in the hybrid battery is used to
power the electric motor, but can also be used
to heat or cool the vehicle. The trip computer
calculates an approximate driving distance
with the remaining current in the hybrid bat-
tery.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
87
Symbols in the hybrid battery gauge
The
symbol in the hybrid battery gauge
indicates that the
Hold
function is activated.
The
symbol indicates that the
Charge
function is activated.
Related information
•
•
Charging the hybrid battery (p. 387)
•
Trip computer
The vehicle's trip computer registers data
while driving such as mileage, fuel consump-
tion and average speed.
To help promote fuel-efficient driving, data is
recorded on both current and average fuel
consumption. Data from the trip computer can
be displayed in the instrument panel.
Example of trip computer information in the instru-
ment panel. The illustration is generic - details may
vary according to vehicle model.
The trip computer includes the following
gauges:
•
Trip odometer
•
Odometer
•
Current fuel consumption
•
Distance to empty tank
•
Distance to discharged battery
•
Tourist - alternative speedometer
Unit standards for distance, speed, etc. can be
changed via system settings in the center dis-
play.
Trip odometer
There are two trip odometers: TM and TA.
TM can be reset manually and TA is reset
automatically if the vehicle is not used for four
hours.
During a drive, the trip odometer registers
data on:
•
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
The readings since the trip odometer's last
reset are displayed.
Odometer
The odometer records the vehicle's total mile-
age. This reading cannot be reset.
Current fuel consumption
This gauge shows the vehicle's fuel consump-
tion at that moment. The reading is updated
about once a second.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
88
Distance to empty tank
The trip computer calculates the dis-
tance that can be driven on the fuel
remaining in the tank.
This calculation is based on average fuel con-
sumption during the last 30 km (20 miles)
and the amount of fuel remaining in the tank.
When the gauge displays "----", there is not
enough fuel remaining to calculate the remain-
ing mileage. Refuel as soon as possible.
The information will change based on your
driving style.
An economical driving style will generally
increase how far you can drive on a certain
amount of fuel.
Distance to discharged battery
This gauge shows the approximate
distance that can be driven with the
remaining current in the hybrid bat-
tery.
This calculation is based on average consump-
tion with a normally loaded vehicle in normal
driving conditions, and takes into account
whether the air conditioning is on or off.
Changing drive modes from
Hybrid
to
Pure
may increase the calculated distance because
Pure
mode has reduced climate control set-
tings (ECO Climate).
When the gauge displays "----", there is little
charge remaining in the battery and electric
motor range cannot be reliably calculated.
The information will change based on your
driving style.
An economical driving style will generally
increase how far you can drive on a certain
amount of fuel.
Starting values for fully charged hybrid
battery
Because it is difficult to predict driving style
and other factors that affect the range of elec-
tric motors, Volvo uses a starting value when
the vehicle is fully charged. This starting value
provides an "up to" amount instead of a pre-
diction on the range of the electric current in
the motor. The difference in starting value
between
Hybrid
and
Pure
is because the
vehicle is permitted to use more current from
the hybrid battery in
Pure
mode, and because
the vehicle switches to ECO Climate.
Mileage when using electric motor
To achieve the longest possible mileage when
using the electric motor, the driver of an elec-
tric vehicle also needs to think about conserv-
ing electricity. The more electricity consumers
(stereo, heated windows/mirrors/seats, very
cold air from climate control system, etc.) that
are active, the shorter the potential mileage.
In addition to high electrical consumption
in the passenger compartment, rapid
acceleration, sudden braking, high speeds,
heavy loads, low ambient temperatures
and driving up hills can reduce possible
driving distance.
Tourist - alternative speedometer
The alternative digital speedometer makes it
easier to drive in countries where speed limit
signs are shown in a different measurement
unit than the one shown in the vehicle's
gauges.
When used, the digital speed is displayed in
the opposite unit to that shown in the analog
speedometer. If
mph
is used in the analog
speedometer, the equivalent speed in
km/h
will be shown in the digital speedometer.
Related information
•
Displaying trip data in the instrument
panel (p. 89)
•
Resetting the trip odometer (p. 90)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
89
•
•
Changing system units of measurement
(p. 130)
Displaying trip data in the
instrument panel
Data recorded and calculated by the trip
computer can be displayed on the instrument
panel.
This data is stored in a trip computer app. You
can choose which information the instrument
panel will display in the app menu.
Open and navigate in the app menu
1
using the right-
hand steering wheel keypad.
App menu
Left/right
Up/down
Confirm
1. Open the app menu in the instrument
panel by pressing (1).
(The App menu cannot be opened while
there is an unacknowledged message in
the instrument panel. The message must
be acknowledged by pressing the
O
but-
ton (4) before the App menu can be
opened).
2. Navigate to the trip computer app by mov-
ing left or right using (2).
> The top four menu rows show meas-
ured values for trip odometer TM. The
next four menu rows show measured
values for trip odometer TA. Scroll up or
down in the list using (3).
1
The illustration is generic - details may vary according to vehicle model.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
90
3. Scroll down to the option buttons to
choose which information to show in the
instrument panel:
•
Odometer
•
Distance to empty tank
•
Distance to discharged battery
•
Tourist (alternative speedometer)
•
Mileage for trip odometer TM, TA or no
display of mileage
•
Current fuel consumption, average fuel
consumption for TM or TA, or no dis-
play of fuel consumption
Select or clear a selection using the
O
but-
ton (4). The change will apply immedi-
ately.
Related information
•
•
Resetting the trip odometer (p. 90)
Resetting the trip odometer
Resetting the trip odometer using the left-
side steering wheel lever.
–
Reset all information in trip odometer TM
(i.e. mileage, average fuel consumption,
average speed and driving time) by press-
ing and holding the
RESET
button on the
left-hand steering wheel lever.
Pressing the
RESET
button only resets
the distance driven.
The TA trip odometer can not be manually
reset. It resets automatically if the vehicle is
not used for four hours or more.
Related information
•
Displaying trip statistics in the
center display
Trip computer statistics can be displayed
graphically in the center display, providing an
overview that facilitates more fuel-efficient
driving.
Open the
Driver
performance
app in the App
view to display trip statistics.
Each bar in the graph repre-
sents a driving distance of 1
kilometers, 10 kilometers or
100 kilometers (or miles). The bars are added
from the right as you drive. The bar at the far
right shows the data for the current trip.
Average fuel consumption and total driving
time are calculated from the most recent reset
of the trip statistics.
Fuel and electricity consumption are shown in
separate graphs. The electricity consumption
shows "net" consumption, i.e. consumed cur-
rent minus regenerated current generated by
braking.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
91
Trip computer statistics
2
.
Related information
•
Trip statistics settings (p. 91)
•
Trip statistics settings
Trip statistics settings can be reset or
adjusted.
1. Open the
Driver performance
app in the
App view to display trip statistics.
2. Tap
Preferences
to
•
change the graph scale. Select 1, 10 or
100 km/miles for the bar.
•
reset data after each trip. Performed
when the vehicle remains stationary for
more than 4 hours.
•
reset data for current trip.
Trip statistics, calculated average con-
sumption, and total driving time are
always reset simultaneously.
Unit standards for distance, speed, etc. can be
changed via system settings in the center dis-
play.
Related information
•
Displaying trip statistics in the center dis-
play (p. 90)
•
•
Resetting the trip odometer (p. 90)
2
The illustration is generic - details may vary according to vehicle model.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
92
Date and time
The clock is displayed in both the instrument
panel and the center display.
Location of clock
Certain messages and other information may
obscure the clock in the instrument panel.
In the center display, the clock is located on
the upper right-hand side in the status bar.
Settings for date and time
–
Select
Settings
System
Date and
Time
in the center display's Top view to
change settings for time and date format.
Adjust the date and time by tapping the
up or down arrows on the touchscreen.
Automatic time for vehicles with GPS
When the vehicle is equipped with a naviga-
tion system,
Auto Time
is also available. The
time zone will then be automatically set to the
vehicle's location. In some navigation systems,
the current location must also be set to deter-
mine the correct time zone. If
Auto Time
is
not selected, the time and date can be
adjusted using the up and down arrows on the
touchscreen.
Daylight savings time
In some countries, the
Auto Daylight Saving
Time
setting can be selected to automatically
change to daylight savings time. For other
countries, the
Daylight Saving Time
setting
can be selected manually.
Related information
•
•
Changing settings in the center display's
Top view (p. 130)
Ambient temperature sensor
The ambient temperature is shown in the
instrument panel.
The sensor detects the temperature outside
the vehicle.
If the vehicle has been stationary, the sensor
reading may be higher than the actual tem-
perature.
When the ambient temperature is
between –5 °C and +2 °C (23
°
F
and 36
°
F), a snowflake symbol will
illuminate to alert the driver of the
risk of slippery conditions.
The symbol is also temporarily lit in the head-
up display
*
if the vehicle is equipped with one.
Change the measurement standard for the
temperature sensor etc. via system settings in
the center display's Top view.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст