INSTRUMENTS AND CONTROLS
When main beam has been switched on the
symbol are shown. The
symbol goes out
IMPORTANT
symbol also illuminates in the combined
when these messages are shown.
Examples of when manual switching between
instrument panel.
AHB may be temporarily unavailable e.g. in situa-
main and dipped beam may be required:
Car with digital combined instrument panel
tions with dense fog or heavy rain. When AHB
•
In heavy rain or dense fog
becomes available again, or the windscreen sen-
When AHB is activated the
symbol turns
sors are no longer blocked, the message goes
•
In freezing rain
white in the instrument's information display.
out and the
symbol illuminates.
•
In snow flurries or slush
When main beam is activated, the symbol shines
•
In moonlight
blue.
WARNING
•
When driving in poorly lit built-up areas
Manual operation
AHB is an aid for using the optimum beam
•
When the traffic ahead has weak lighting
pattern when conditions are favourable.
•
If there are pedestrians on or beside the
NOTE
The driver always bears responsibility for man-
road
Keep the windscreen surface in front of the
ually switching between main and dipped
beam when traffic situations or weather con-
•
If there are highly reflective objects such
camera sensor free from ice, snow, mist and
ditions so require.
as signs in the vicinity of the road
dirt.
•
When the lighting from oncoming traffic
Do not stick or attach anything to the wind-
is obscured by e.g. a crash barrier
screen in front of the camera sensor as this
•
When there is traffic on connecting roads
may reduce effectiveness or cause one or
more of the systems dependent on the cam-
•
On the brow of a hill or in a hollow
era to stop working.
•
In sharp bends.
If the message Active main beam Temporary
For more information on the limitations of the
unavailable Switch manually is shown in the
camera sensor, see Collision warning system* -
combined instrument panel's information display
camera sensor limitations (p. 234).
then you have to switch manually between main
and dipped beam. However, the knob for head-
Related information
lamp control can still remain in position
• Main/dipped beam (p. 91)
The same applies if the message Windscreen
• Light switches (p. 88)
sensors blocked See manual and the
* Option/accessory.
93
INSTRUMENTS AND CONTROLS
Active bending lights *
tivated in the menu system MY CAR, see MY
Active bending lights are designed to provide
CAR (p. 113)). In the event of a fault in the func-
maximum illumination in bends and junctions.
tion the
symbol illuminates in the com-
bined instrument panel at the same time as the
Cars with LED 22 headlamps * can have active
information display shows an explanatory text and
bending lights, depending on the car's equip-
a further illuminated symbol.
ment level.
Symbol
Message
Specification
Headlamp
The system is dis-
system
engaged. Visit a
malfunction
workshop if the
Service
message remains.
required
Volvo recommends
that you contact an
authorised Volvo
workshop.
The function is only active in twilight or darkness
and only when the car is moving.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
The function 23 can be deactivated/activated in
The LED headlamps can include the Active bend-
the menu system MY CAR, see MY CAR
ing lights function, depending on the car's equip-
(p. 113).
ment level. Active bending lights follow steering
Related information
wheel movements to provide maximum illumina-
• Main/dipped beam (p. 91)
tion in bends and junctions and thereby increase
safety.
• Active main beam* (p. 92)
The function is activated automatically when the
• Light switches (p. 88)
car is started (provided that it has not been deac-
22 LED (Light Emitting Diode)
23 Activated on delivery from the factory.
94
* Option/accessory.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Headlamps - adjusting headlamp
3.
Start from the design lines on the headlamp
pattern
lenses; see the lines in the following figure.
Position the self-adhesive templates at the
The halogen headlamp pattern must be adjusted
design lines with the help of the illustration.
to avoid dazzling oncoming motorists and can
be set for right or left-hand traffic.
LED headlamps*
The light pattern does not need to be adjusted.
The headlamp pattern is designed in such a way
that oncoming traffic is not dazzled.
Halogen headlamps
The headlamp pattern for halogen headlamps is
readjusted by masking the headlamp lens. The
headlamp pattern may not be as good.
Masking the headlamps
1. Copy the A and B templates for left-hand
drive cars or the C and D templates for right-
hand drive cars, see later section "Templates
for halogen headlamps". The templates have
a scale of 1:2. Use a photocopier with a
zoom function for example, and copy the
templates at 200 %:
• A = LHD Right (left-hand drive, right lens)
• B = LHD Left (left-hand drive, left lens)
• C = RHD Right (right-hand drive, right
lens)
• D = RHD Left (right-hand drive, left lens)
2. Transfer the template to a self-adhesive
waterproof material and cut it out.
}}
* Option/accessory.
95
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
||
Upper row: left-hand drive cars, templates A and B. Lower row: right-hand drive cars, templates C and D.
96
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Templates for halogen headlamps
97
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Rear fog lamp
The rear fog lamp is switched off automatically
Brake lights
When visibility is reduced by fog the rear fog
when the START/STOP ENGINE button is
The brake light automatically comes on during
depressed or when the headlamp control's knob
lamp can be used so that other road users can
braking.
detect the vehicle in front at an early stage.
is turned to position
or
The brake light is switched on when the brake
pedal is depressed. In addition, it is switched on
NOTE
when one of driving support systems Adaptive
Regulations on the use of rear fog lamps vary
cruise control (p. 201), City Safety (p. 220) or
from country to country.
Collision warning system (p. 227) brakes the car.
Related information
Related information
• Foot brake - emergency brake lights and
• Light switches (p. 88)
automatic hazard warning flashers (p. 290)
Button for rear fog lamp.
The rear fog lamp consists of a lamp on the left-
hand side in a left-hand drive car, or on the right-
hand side in a right-hand drive car.
The rear fog lamp can only be switched on when
key position II is active or the engine is running
and the headlamp control's knob is in position
or
Press the button for On/Off. The indicator sym-
bol
in the combined instrument panel and
the light in the button both illuminate when the
rear fog lamp is switched on.
98
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Hazard warning flashers
Related information
direction indicators
The hazard warning flashers warn other road
• direction indicators (p. 99)
The car's direction indicators are operated with
users by means of all of the car's direction indi-
• Foot brake - emergency brake lights and
the left-hand stalk switch. The direction indicator
cator lamps flashing simultaneously when this
automatic hazard warning flashers (p. 290)
lamps flash three times or continuously, depend-
function is activated.
ing on how far up or down the stalk switch is
moved.
Button for hazard warning flashers.
Direction indicators.
Press the button to activate the hazard warning
flashers. Both direction indicator symbols in the
Short flash sequence
combined instrument panel flash when the haz-
Move the stalk switch up or down to the first
ard warning flashers are used.
position and release. The direction indicator
The hazard warning flashers are activated auto-
lamps flash three times. The function can be
matically when the car has been braked so sud-
activated/deactivated in the menu system
denly that the emergency brake lights have been
MY CAR, see MY CAR (p. 113).
activated and speed is below approx. 10 km/h
Continuous flash sequence
(6 mph). The hazard warning flashers remain
Move the stalk switch up or down to its end
active when the car has stopped and are deacti-
position.
vated automatically when you start driving again;
they can also be deactivated by pressing the but-
ton.
}}
99
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
||
The stalk switch remains in its position and is
Interior lighting
• the engine has been switched off and the
moved back manually, or automatically by the
The passenger compartment lighting is acti-
car's electrical system is in key position 0
steering wheel movement.
vated/deactivated with the buttons in the con-
• the car has been unlocked but the engine
trols above the front seats and the rear seat.
has not been started.
Direction indicator symbols
For direction indicator symbols, see Combined
Front reading lamps*
instrument panel - meaning of indicator symbols
The reading lamps are switched on or off by
(p. 71).
briefly pressing the relevant button in the roof
console.
Related information
• Hazard warning flashers (p. 99)
Brightness is adjusted by holding the button
pressed in.
Rear reading lamps*
Controls in roof console for the front reading lamps and
passenger compartment lighting.
Reading lamp, left-hand side
Passenger compartment lighting (floor
lamps* and ceiling lamps) - On/Off
Auto function for passenger compartment
lighting
Reading lamp, right-hand side
Rear reading lamps.
All lighting in the passenger compartment can be
The lamps are switched on or off by briefly press-
ing the relevant button.
switched on and off manually within 30 minutes
from when:
Brightness is adjusted by holding the button
pressed in.
100
* Option/accessory.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Floor lighting as ambient light*
The passenger compartment lighting is switched
switched off. The intensity and colour of the light
To make the interior brighter while driving the
on and remains on for 30 seconds if:
can be changed in the menu system MY CAR,
floor lighting can be activated at dimmed level.
see MY CAR (p. 113).
• the car is unlocked with the remote control
Floor lamp intensity can be changed in the menu
key or key blade, see Remote control key -
system MY CAR, see MY CAR (p. 113).
functions (p. 160) or Detachable key blade -
unlocking doors (p. 164)
Lighting in the front door storage
• the engine has been switched off and the
compartments*
car's electrical system is in key position 0.
Lighting in the front door storage compartments
Passenger compartment lighting is switched off
comes on when the engine starts.
when:
Glovebox lighting
• the engine is started
Glovebox lighting is switched on and off respec-
• the car is locked.
tively when the lid is opened or closed.
The passenger compartment lighting is switched
Vanity mirror lighting
on and off respectively when a side door is
The lighting for the vanity mirror (p. 147) is
opened or closed.
switched on and off respectively when the cover
It remains switched on for two minutes if one of
is opened or closed.
the doors is open.
Lighting in the cargo area
If any lighting is switched on manually and the
The lighting in the cargo area is switched on and
car is locked then it will be switched off automati-
off respectively when the tailgate is opened or
cally after two minutes.
closed.
Ambience lights*
Auto function for passenger
When the normal passenger compartment light-
compartment lighting
ing is switched off and the engine is running, an
The auto function is activated when the lamp in
LED illuminates in the front and rear roof console
the AUTO button is lit.
respectively in order to provide a low light and
The passenger compartment lighting is then
enhance the ambience while driving. The light
also makes it easier during dark periods of the
switched on and off as indicated below.
day to see objects in storage compartments, etc.
This lighting switches off when the engine is
* Option/accessory.
101
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENTS AND CONTROLS
Home safe lighting
Approach light duration
Wipers and washers
Home safe lighting consists of dipped beam,
Approach lighting consists of position lamps,
Wipers and washers clean the windscreen and
position lamps, lamps in the outside handles and
lamps in the door mirrors, number plate lighting,
rear window. The headlamps are cleaned with
number plate lighting.
interior roof lighting as well as floor lighting.
high-pressure washing.
Some of the exterior lighting can be kept
Approach lighting is switched on with the remote
Windscreen wipers 24
switched on to work as home safe lighting after
control key, see Remote control key - functions
the car has been locked.
(p. 160), and is used to switch on the car's light-
ing at a distance.
1. Remove the remote control key from the
ignition switch.
When the function is activated with the remote
control key, position lamps, lamps in the outside
2. Move the left-hand stalk switch toward the
handles, number plate lighting, interior roof light-
steering wheel to the end position and
ing and floor lighting are switched on.
release it. The function can be activated in
the same way as with main beam flash; see
The length of time for which the approach light-
Main/dipped beam (p. 91).
ing should be kept on can be set in the menu
system MY CAR, see MY CAR (p. 113).
3. Get out of the car and lock the door.
When the function is activated, dipped beam,
Related information
Windscreen wipers and windscreen washers.
position lamps, lamps in the outside handles and
• Home safe lighting (p. 102)
number plate lighting are switched on.
Rain sensor, On/Off
The length of time for which the home safe light-
Thumbwheel sensitivity/frequency
ing should be kept on can be set in the menu
system MY CAR, see MY CAR (p. 113).
Windscreen wipers off
Move the stalk switch to position 0 to
Related information
switch off the windscreen wipers.
• Approach light duration (p. 102)
Single sweep
Raise the stalk switch and release to
make one sweep.
24 For replacing the wiper blades and service position wiper blades, see Wiper blades (p. 359). For filling washer fluid, see Washer fluid - filling (p. 361).
102
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст