Volvo V40 Cross Country (2018 year). Instruction — part 6
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
107
automatically returns to its original position after
a short time.
The function can be activated/deactivated in the
menu system MY CAR, see MY CAR (p. 113).
Automatic retraction when locking
*
When the car is locked/unlocked with the remote
control key the door mirrors are automatically
retracted/extended.
The function can be activated/deactivated in the
menu system MY CAR, see MY CAR (p. 113).
Resetting to neutral
Mirrors that have been moved out of position by
an external force must be reset electrically to the
neutral position for electric retracting/extending
to work correctly:
1. Retract the mirrors with the L and R buttons.
2. Fold them out again with the L and R but-
tons.
3. Repeat the above procedure as necessary.
The mirrors are now reset in neutral position.
Retractable power door mirrors
*
The mirrors can be retracted for parking/driving
in narrow spaces:
1. Depress the L and R buttons simultaneously
(key position must be at least I).
2. Release them after approximately 1 second.
The mirrors automatically stop in the fully
retracted position.
Fold out the mirrors by pressing down the L and
R buttons simultaneously. The mirrors automati-
cally stop in the fully extended position.
Home safe and approach lighting
The lamp on the door mirrors illuminates when
approach lighting (p. 102) or home safe lighting
(p. 102) is selected.
Related information
•
Rearview mirror - interior (p. 108)
•
Windows and door mirrors - heating (p. 107)
Windows and door mirrors - heating
The defroster is used to quickly remove misting
and ice from the windscreen, rear window and
door mirrors.
Heated windscreen
*, rear window and
door mirrors
Heating, windscreen
Heating, rear window and door mirrors
The function is used to remove ice and misting
from the windscreen, rear window and door mir-
rors.
One press of the respective button starts the
heating. The light in the button indicates that the
function is active. Switch off the heating as soon
as the ice/misting is cleared in order not to load
the battery unnecessarily. However, the function
is switched off automatically after a certain time.
INSTRUMENTS AND CONTROLS
* Option/accessory.
108
See also Demisting and defrosting the wind-
screen (p. 136).
The door mirrors and rear window are demisted/
defrosted automatically if the car is started in an
outside temperature lower than +7 °C. Automatic
defrosting can be selected in the menu system
MY CAR, see MY CAR (p. 113).
The compass (p. 109) is deactivated when the
heated windscreen is activated. When the heated
windscreen is deactivated, the compass is reacti-
vated.
Rearview mirror - interior
The interior rearview mirror can be dimmed with
a control in the mirror's lower edge. Alternatively,
the rearview mirror dims automatically.
Control for dimming
Manual dimming
Bright light from behind could be reflected in the
rearview mirror and dazzle the driver. Use dim-
ming with the dimming control when lights from
behind are distracting:
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal position by moving the con-
trol towards the windscreen.
Automatic dimming
*
Bright light from behind is automatically dimmed
by the rearview mirror. The control for manual
dimming is not available on mirrors with auto-
matic dimming.
The rearview mirror contains two sensors - one
forward facing and one rearward facing - that
work together to identify and eliminate dazzling
light. The forward facing sensor detects ambient
light, while the rearward facing sensor detects
the light from vehicle headlights behind.
If the sensors are obscured by e.g. parking
permits, transponders, sun visors or objects in
the seats or in the cargo area in such a way
that light is prevented from reaching the sen-
sors, then the dimming function of the rear-
view mirror is reduced.
Only rearview mirror with automatic dimming can
be equipped with compass (p. 109).
Related information
•
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
109
Glass roof*
The glass roof's blind can be operated with the
control in the roof console.
The glass roof is fixed but the power operated
roller blind can be operated in key position I or II
with the control in the roof console. For informa-
tion on key positions - see Key positions - func-
tions at different levels (p. 81).
Automatic opening to end position
Manual opening until the button is released
Manual closing until the button is released
Automatic closing to end position
•
Avoid touching the blind because it may
then be damaged.
•
Only use the control in the roof console
to operate the blind.
Compass*
The upper right-hand corner of the rearview mir-
ror contains a display that shows the compass
direction in which the front of the car is pointing.
Operation
Rearview mirror with compass.
Eight different directions are shown with English
abbreviations:
N
(north),
NE
(north east),
E
(east),
SE
(south east),
S
(south),
SW
(south west),
W
(west) and
NW
(north west).
The compass is activated automatically when the
car is started or when key position II is active, see
Key positions - functions at different levels
(p. 81). To deactivate/activate the compass -
press in the button on the rear side of the mirror
using a paper clip for example.
The compass is deactivated when the heated
windscreen is activated. When the heated wind-
screen is deactivated, the compass is reactivated.
||
INSTRUMENTS AND CONTROLS
110
Calibration
The earth is divided into 15 magnetic zones. The
compass is set for the geographic area to which
the car was delivered. The compass should be
calibrated if the car is moved across several mag-
netic zones. Proceed as follows:
1. Stop the car in a large open area free from
steel structures and high-voltage power lines.
2. Start the car.
For the best calibration, switch off all electri-
cal equipment (climate control system, wipers,
etc.) and makes sure that all doors are closed.
3. Hold the button on the underside of the rear-
view mirror depressed approx. 3 seconds.
The number of the current magnetic zone is
shown.
Magnetic zones.
4. Press the button repeatedly until the
required magnetic zone (
1–15
) is shown.
See the map of magnetic zones for the com-
pass.
5. Wait until the display returns to showing the
character
C
, or hold the button on the bot-
tom of the rearview mirror depressed for
approx. 6 seconds (use e.g. a paper clip) until
the character
C
is shown.
6. Drive slowly in a circle at a speed of no more
than 10 km/h (6 mph) until a compass direc-
tion is shown in the display, indicating that
calibration is complete. Then drive a further 2
circles to fine-tune calibration.
7. Repeat the above procedure as necessary.
Menu navigation - combined
instrument panel
The menus shown on the information display in
the combined instrument panel (p. 66) are con-
trolled with the left-hand stalk switch. Which
menus are shown depends on the key position
(p. 81).
Information display (analogue combined instrument
panel) and menu navigation controls.
INSTRUMENTS AND CONTROLS
* Option/accessory.
111
Information displays (digital combined instrument panel)
and controls for menu navigation.
OK - access the menu, acknowledge mes-
sages and confirm menu selections.
Thumbwheel – browse between menu
options.
RESET - reset data in the selected trip com-
puter step and go back in the menu struc-
ture.
If there is a message (p. 112) then it must be
acknowledged with OK in order that the menus
shall be shown.
Related information
•
•
Menu overview - analogue combined instru-
ment panel (p. 111)
•
Menu overview - digital combined instrument
panel (p. 111)
Menu overview - analogue
combined instrument panel
Which menus are shown in the combined instru-
ment panel's information display depends on the
key position (p. 81).
Some of the following menu options require the
function and hardware to be installed in the car.
Digital speed
Parking heater*
Additional heater*
TC options
Service status
Oil level
26
Messages (##)
27
Related information
•
Menu navigation - combined instrument
panel (p. 110)
•
Menu overview - digital combined instrument
panel (p. 111)
•
Combined instrument panel (p. 66)
Menu overview - digital combined
instrument panel
Which menus are shown in the combined instru-
ment panel's information display depends on the
key position (p. 81).
Some of the following menu options require the
function and hardware to be installed in the car.
Settings*
Themes
Contrast mode/Colour mode
Service status
Messages
28
Oil level
29
Parking heater*
Trip computer reset
Related information
•
Menu navigation - combined instrument
panel (p. 110)
•
Menu overview - analogue combined instru-
ment panel (p. 111)
•
INSTRUMENTS AND CONTROLS
112
Messages
When a warning, information or indicator symbol
illuminates, a corresponding message appears
on the information display.
Message
Specification
Stop safely
A
Stop and switch off the
engine. Serious risk of dam-
age - consult a workshop
B
.
Stop engine
A
Stop and switch off the
engine. Serious risk of dam-
age - consult a workshop
B
.
Service
urgent
A
Contact a workshop
B
to
check the car immediately.
Service
required
A
Contact a workshop
B
to
check the car as soon as
possible.
See manual
A
Read the owner's manual.
Book time for
maintenance
Time to book regular service
- contact a workshop
B
.
Message
Specification
Time for reg-
ular mainte-
nance
Time for regular service -
contact a workshop
B
. The
timing is determined by the
number of kilometres driven,
number of months since the
last service, engine running
time and oil grade.
Maintenance
overdue
If the service intervals are
not followed then the war-
ranty does not cover any
damaged parts - contact a
workshop
B
.
Transmission
Oil change
needed
Contact a workshop
B
to
check the car as soon as
possible.
Transmission
Reduced per-
formance
Transmission cannot handle
full capacity. Drive with care
until the message clears
C
.
If shown repeatedly - con-
tact a workshop
B
.
Message
Specification
Transmission
hot Reduce
speed
Drive more smoothly or stop
the car in a safe manner.
Disengage the gear and run
the engine at idling speed
until the message clears
C
.
Transmission
hot Stop
safely Wait for
cooling
Critical fault. Stop the car
immediately in a safe man-
ner and contact a work-
shop
B
.
Temporarily
off
A
A function has been tempo-
rarily switched off and is
reset automatically while
driving or after starting
again.
Low battery
charge Power
save mode
The audio system is
switched off to save energy.
Charge the battery.
A
Part of message, shown together with information on where the
problem has arisen.
B
An authorised Volvo workshop is recommended.
C
For more messages concerning automatic gearbox.
26
Certain engines.
27
The number of messages is indicated in brackets.
28
The number of messages is indicated in brackets.
29
Certain engines.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
113
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Related information
•
•
Menu navigation - combined instrument
panel (p. 110)
Messages - handling
Use the left-hand stalk switch to acknowledge
and browse among messages (p. 112) that are
shown in the information display of the com-
bined instrument panel.
When a warning, information or indicator symbol
illuminates, a corresponding message is shown in
the display. An error message is stored in a mem-
ory list until the fault has been rectified.
Press OK on the left-hand stalk switch to
acknowledge
30
a message. Scroll through mes-
sages with the thumbwheel (p. 110).
If a warning message appears while you are
using the trip computer, the message must be
read (press OK) before the previous activity
can be resumed.
Related information
•
Menu overview - analogue combined instru-
ment panel (p. 111)
•
Menu overview - digital combined instrument
panel (p. 111)
MY CAR
MY CAR is a menu source that handles many of
the car's functions, e.g. City Safety
™, locks and
alarm, automatic fan speed, setting the clock,
etc.
Certain functions are standard, others are
optional - the range also varies depending on the
market.
Operation
Navigation in the menus is carried out using but-
tons in the centre console or with the steering
wheel's right-hand keypad
*.
30
A message can also be acknowledged via the thumbwheel or RESET button.
||
INSTRUMENTS AND CONTROLS
114
Control panel in centre console and steering wheel key-
pad. The figure is schematic - the number of functions
and layout of the buttons both vary, depending on the
equipment selected and the market.
MY CAR - opens the menu system MY CAR.
TUNE - turn the knob in the centre console
or the thumbwheel on the steering wheel to
scroll up/down through the menu options.
OK/MENU - press the button in the centre
console or the thumbwheel on the steering
wheel to select/tick in the highlighted menu
option or store the selected function in the
memory.
EXIT
EXIT functions
Depending on the function the cursor is on when
EXIT is depressed briefly, and on which menu
level, one of the following may occur:
•
phone call is rejected
•
current function is interrupted
•
input characters are deleted
•
most recent selections are undone
•
leads up in the menu system.
A long press on EXIT leads to the normal view
for MY CAR or if you are in the normal view, to
the highest menu level (main source menu).
Menu options and search paths
For a description of the menu options and search
paths in MY CAR, see the Sensus Infotainment
supplement.
Trip computer
The car's trip computer records and calculates
vales such as e.g. distance, fuel consumption
and average speed whilst driving.
Trip computer content and appearance varies
depending on whether the combined instrument
panel is analogue or digital:
•
Trip computer - analogue combined instru-
ment panel (p. 116)
•
INSTRUMENTS AND CONTROLS
* Option/accessory.
115
The information from the trip computer can be shown in
the combined instrument panel's information display
31
.
Trip meter
The trip computer has two trip meters and one
odometer for the total mileage.
Average
Average fuel consumption is calculated from the
last resetting.
There may be a slight deviation if a fuel-driven
heater
* has been used.
Average speed
The average speed is calculated for the driving
distance driven since the last reset to zero.
Instantaneous
The information for current fuel consumption is
updated continuously - approximately once per
second. When the car is driven at low speed the
consumption is shown per time unit - at a higher
speed it is shown related to mileage.
Different units (km/miles) can be selected for the
display - see section below."Change unit"
(p. 114)
Range - distance to empty tank
The trip computer shows the approximate dis-
tance that can be driven with the fuel quantity
remaining in the tank.
No guaranteed range remains when the heading
Distance to empty
shows "
----
".
•
In which case, refuel as soon as possible.
The calculation is based on the average fuel con-
sumption over the last 30 km and the remaining
driveable fuel quantity.
There may be a slight deviation if the driving
style has been changed.
An economic driving style generally results in a
longer driving distance. For more information on
how fuel consumption can be influenced, see
Environmental philosophy (p. 22).
Digital speed display in another unit
32
If the main instrument is graduated in mph, the
equivalent digital speed is shown as km/h.
Change unit
Distance and fuel unit can be changed in the
menu system MY CAR, see MY CAR (p. 113).
In addition to in the trip computer, these units
are also changed in Volvo's navigation sys-
tem
*.
Related information
•
Trip computer - analogue combined instru-
ment panel (p. 116)
•
Trip computer - digital combined instrument
panel (p. 120)
•
Trip computer - trip statistics
31
The appearance and showing of the display may vary depending on the instrument variant.
32
Only digital combined instrument panel and certain markets.
INSTRUMENTS AND CONTROLS
116
Trip computer - analogue combined
instrument panel
The information from the trip computer can be
shown in the combined instrument panel and
operated with the controls on the left-hand stalk
switch and with the combined instrument panel's
menu.
Checking and settings can be made immediately
after the combined instrument panel is automati-
cally illuminated in connection with unlocking. If
none of the trip computer's controls are actuated
within approx. 30 seconds after the driver's door
has been opened then the instrument extin-
guishes, after which either key position II or
engine starting is required in order to operate the
trip computer.
If a warning message appears when the trip
computer is used then the message must first
be acknowledged before the trip computer
can be reactivated.
•
Acknowledge the message by briefly
pressing the indicator stalk OK button.
Controls
Information display and controls.
OK - opens the combined instrument panel's
menu, confirms messages or menu selec-
tions.
Thumbwheel - browses between menu
options or trip computer options.
RESET - resets the current trip meter or
goes back out of the menu structure.
Trip computer alternative
Choose which trip computer should be shown:
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between the
options and stop at the required heading.
The trip computer display in the combined instru-
ment panel can be shifted to another option at
any time during the journey. One of the options
means that no trip computer is shown.
Trip computer heading in combined instrument panel
Information
Trip meter
T1 and total dist.
•
Long press on RESET resets trip meter T1.
Trip meter
T2 and total dist.
•
Long press on RESET resets trip meter T2.
INSTRUMENTS AND CONTROLS
}}
117
Trip computer heading in combined instrument panel
Information
Distance to empty
For more information - see the section"Range - distance to empty tank" (p. 114).
Fuel consumption
Current consumption.
Average speed
•
Long press on RESET resets
Average speed
.
No trip computer information.
This option shows a blank display and it also indicates the beginning/end of the loop.
Resetting the trip computer
1. Turn the thumbwheel and stop at the trip
computer heading to be reset:
T1 and total
dist.
,
T2 and total dist.
or
Average speed
.
2. One long press on RESET resets the value
for the selected heading.
Each heading must be zeroed individually.
Functions in the combined instrument
panel's menu
The combined instrument panel's menu includes
setting options for trip computer. Open the menu
to check/adjust the functions in the table below.
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Press OK.
3. Browse through the functions with the
thumbwheel and select/confirm with OK.
4. Finish by pressing twice on RESET after
completed checking/adjustment.
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
118
Functions
Information
Digital speed
•
km/h
•
mph
•
No display
Shows the car's speed digitally in the centre of the combined instrument panel.
Parking heater*
•
DIRECT START
•
Timer 1
•
Timer 2
For a description of programming the timer, see Engine block heater and passenger compartment
heater
Additional heater*
•
Auto On
•
Off
For more information, see Additional heater
TC options
•
Distance to empty tank
•
Fuel consumption
•
Average speed
•
Trip meter
T1 and total dist.
•
Trip meter
T2 and total dist.
Here you can activate the options that you want to be available as selectable headings in the trip
computer. The symbols for the options already selected are white with a "tick" - others are grey
and have no "tick".
Service status
Shows the number of months and the distance until the next service.
Oil level
A
For more information, see Engine oil - checking and filling (p. 345).
Messages (##)
For more information, see Messages (p. 112).
A
Certain engines.
INSTRUMENTS AND CONTROLS
* Option/accessory.
119
Related information
•
•
INSTRUMENTS AND CONTROLS
120
Trip computer - digital combined
instrument panel
The information from the trip computer can be
shown in the combined instrument panel and
operated with the controls on the left-hand stalk
switch and with the combined instrument panel's
menu.
Checking and settings can be made immediately
after the combined instrument panel is automati-
cally illuminated in connection with unlocking. If
none of the trip computer's controls are actuated
within approx. 30 seconds after the driver's door
has been opened then the instrument extin-
guishes, after which either key position II or
engine starting is required in order to operate the
trip computer.
If a warning message appears when the trip
computer is used then the message must first
be acknowledged before the trip computer
can be reactivated.
•
Acknowledge the message by briefly
pressing the indicator stalk OK button.
Controls
Three trip computer options can be displayed simultane-
ously - one in each "window".
OK - opens the combined instrument panel's
menu, confirms messages or menu selec-
tions.
Thumbwheel - browses between menu
options or trip computer options.
RESET - resets the current trip meter or
goes back out of the menu structure.
Trip computer alternative
Choose which trip computer should be shown:
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between the
heading combinations.
3. Stop at the required combination for the con-
stant display of this trip data in the combined
instrument panel.
The trip computer display in the combined instru-
ment panel can be shifted to another option at
any time during the journey. One of the options
means that no trip computer is shown.
Heading combinations
Information
Average
Trip meter T1 + Meter reading
Average speed
•
Long press on RESET resets trip meter T1.
Instantaneous Trip meter T2 + Meter reading Distance to empty tank
•
Long press on RESET resets trip meter T2.
INSTRUMENTS AND CONTROLS
}}
121
Heading combinations
Information
Instantaneous
Meter reading
km/h<>mph
A
km/h<>mph - "Reverse digital speed display", see Trip computer (p. 114).
No trip computer information.
This option extinguishes all three trip computer displays and it also indicates the
beginning/end of the loop.
A
Only certain markets.
Resetting the trip computer
Trip meter
1. Turn the thumbwheel and stop at the head-
ing combination with the trip meter to be
reset.
2. One long press on RESET resets the value
for the selected heading.
Average speed and average consumption
1. Press OK to open the combined instrument
panel's menu.
2. Browse to the
Trip computer reset
menu
option with the thumbwheel and confirm with
OK.
3. Choose to reset average consumption, aver-
age speed or to reset both, and confirm your
selection with OK.
4. Finish by pressing RESET.
Functions in the combined instrument
panel's menu
The combined instrument panel's menu includes
setting options for trip computer. Open the menu
to check/adjust the functions in the table below.
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Press OK.
3. Browse through the functions with the
thumbwheel and select/confirm with OK.
4. Finish by pressing twice on RESET after
completed checking/adjustment.
Functions
Information
Trip computer reset
•
Average
•
Average speed
Reset the value of average fuel consumption and average speed.
Note that this function does not reset both trip meters T1 and T2.
Messages
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
122
Functions
Information
Themes
Settings*
Select
Auto On
or
Off
.
For more information, see Additional heater
Contrast mode/Colour mode
Adjusting the combined instrument panel's brightness and colour intensity.
Parking heater*
•
Direct start
•
Timer 1
•
Timer 2
For a description of programming the timer, see Engine block heater and passenger compartment heater
Service status
Shows the number of months and the distance until the next service.
Oil level
A
For more information, see Engine oil - checking and filling (p. 345).
A
Certain engines.
Related information
•
•
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст