Audi TT (2007 year). Manual — part 29
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Detach securing clip -3- for gear selector cable from gearbox
selector lever -1- and pull cable off pin -arrow-.
Metal selector relay lever:
– Detach securing clip -4- for gate selector cable from selector
relay lever -2- and pull cable off pin -arrow-.
Plastic selector relay lever:
• To prevent damage to gate selector cable, cable end-piece
must be detached from gate selector cable before removing.
– Pull locking device forwards onto stop -arrow 1- and lock by
turning anti-clockwise -arrow 2-.
– Press selector relay lever towards front -arrow 3-.
All vehicles (continued):
– Remove cable support bracket -arrows- from gearbox and
place to one side (selector cables remain fitted).
– Move clear wiring harnesses -arrows- and electrical connector
-1- at bracket.
2. Cylinder head
107
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove bolts -2, 5- and -arrows-.
– Using removal lever -80 - 200- , move clear electrical wiring
and hoses at air pipe (left-side).
– Loosen hose clip -3- and detach air pipe (left-side).
Note
Disregard -items 1, 4-.
– Disconnect vacuum hose -1- from vacuum pump.
Note
Disregard -arrows-.
– Unplug electrical connector -2- at coolant temperature sender
-G62- .
– Slacken hose clips -arrows- and detach coolant hoses from
connection.
Note
Disregard -item 1-.
– Remove nut -1- and bolts -2-, detach exhaust gas recirculation
pipe.
108
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Disconnect oil supply line from connection on oil filter bracket.
To do so, counterhold at hexagon flats with an open-end span‐
ner and loosen union nut -3-.
Note
Disregard -items 1, 2-.
– Remove nut -2- at retaining clip for vacuum line.
– Remove bolt -1-.
– Unscrew oil supply line from connection on turbocharger. To
do so, counterhold at hexagon flats with an open-end spanner
and slacken union nut -3-.
– Remove bolt -arrow- securing rear cover for toothed belt.
– Take toothed belt off camshaft sprocket
.
– Remove locking tool -T10265- .
– Remove nut -1-.
Note
Disregard -arrow-.
2. Cylinder head
109
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unplug electrical connector -arrow- at Hall sender -G40- .
– Remove cylinder head cover
.
– Unplug electrical connectors on glow plugs.
– Remove bolts -1- and detach camshaft sprocket.
– Counterhold using counterhold tool -T10051- and loosen bolt
-1- for camshaft hub.
– Unscrew bolt approx. 2 turns.
– Apply puller -T10052- to camshaft hub and and screw bolts
-1- into hub.
– Counterhold on hexagon flats (30 mm) of puller and screw in
bolt -2- to pull off camshaft hub.
– Detach hub from taper of camshaft.
110
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст