Ford Escort (2003 year). Manual — part 4
Inserting a tape
Push only slightly when inserting a
cassette tape (with the open edge
to the right). A cassette deck
loading mechanism pulls the tape in
the rest of the way.
You can switch fromradio to tape play by inserting a tape into the
cassette deck.
Tape play select
Insert a tape to begin tape play.
Push only slightly when inserting a cassette tape (with the open edge to
the right). A cassette deck loading mechanism pulls the tape in the rest
of the way.
Rewind
The rewind control works in tape
mode.
• In tape mode, radio play will
continue until rewind is stopped (with the TAPE control) or the
beginning of the tape is reached.
Fast forward
The fast forward control works in
tape mode.
• In the tape mode, tape direction
will automatically reverse when the end of the tape is reached.
Tape side select
Press this control to play the
alternate side of a tape.
Eject function
Press the control to stop and eject a
tape.
EJ
REW
FF
DOLBY B NR
EJ
Entertainment Systems
18
Dolby
姞 noise reduction
Dolby
威 noise reduction operates
only in tape mode. Dolby
威 noise
reduction reduces the amount of
hiss and static during tape playback.
Press the
control to activate (and deactivate) Dolby
威 noise reduction.
Dolby
威 noise reduction manufactured under license from Dolby威
Laboratories Licensing Corporation. “Dolby
威” and the double-D symbol
are registered trademarks of Dolby
威 Laboratories Licensing Corporation.
AM/FM RADIO WITH COMPACT DISC PLAYER
Volume/power control
Ensure that the ignition switch is in
the ACC or ON position.
Press the control to turn the audio
systemon. Turn the control to raise
or lower the volume.
Press the control again to turn the
audio systemoff.
NOTE: To prevent the battery frombeing discharged, do not leave the
audio systemon for a long period when the engine is not running.
AM/FM select
The AM/FM control works in radio
mode.
CLOCK
PUSH
POWER-VOL
AUDIO
DISC
1
RDM
2
RPT
SCAN
AUTO
M
AM
FM
CD
H
M
TUNE
SEEK
TRACK
3
4
5
DISC IN
PUSH
POWER-VOL
AM
FM
Entertainment Systems
19
AM/FM select in radio mode
This control allows you to select AM or FM frequency bands. Press the
control to toggle between AM, FM1 or FM2 memory preset stations. The
selected mode will be indicated in the display. If FM stereo is enabled,
ST will be illuminated in the display.
NOTE: If the FM broadcast signal becomes weak, reception
automatically changes from STEREO to MONO for reduced noise, and
the ST indicator will go out.
Tune adjust
The tune control works in radio mode.
Tune adjust in radio mode
• Press
to move up the
frequency band in individual
increments.
• Press
to move down the
frequency band in individual
increments.
Seek function
The seek function control works in radio mode.
Seek function in radio mode
Press and momentarily hold the
SEEK control. A beep will sound
indicating you have entered seek
mode.
• Press
to find the next
listenable station up the
frequency band.
• Press
to find the next listenable station down the frequency band.
NOTE: If you continue to press and hold the control, the frequency will
continue changing without stopping. Release the control after the beep
sounds.
Tracking feature
The tracking feature works in CD mode.
H
M
TUNE
SEEK
TRACK
H
M
TUNE
SEEK
TRACK
Entertainment Systems
20
Tracking feature in CD mode
• Press
to advance to the next
selection. Press and hold the
control to fast forward through
the current selection.
• Press
to reverse to the
previous selection. Press and hold
the control to rewind through the current selection.
Scan function
The scan function works in radio
mode.
Scan function in radio mode
Press the SCAN control to hear a sampling of strong stations on the
frequency band. Each station will play for approximately 5 seconds.
Press the SCAN control again to remain on a station and disable this
mode.
CD select
• To begin CD play (if CD is
loaded), press the CD control, or
• Insert the compact disc, label side
up into the CD slot (if no CD is
loaded). The auto loading mechanism will pull in the CD. There will be
a short lapse before play begins.
• The first track of the disc will begin playing. The DISC IN control will
illuminate.
• The track number will appear in the display.
To disable CD mode, press the power/volume control.
H
M
TUNE
SEEK
TRACK
SCAN
CD
Entertainment Systems
21
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст