Ford F-150 Heritage (2004 year). Manual — part 3

GAUGES

Standard instrument cluster gauges

Optional instrument cluster gauges

Speedometer: Indicates the
current vehicle speed.

Instrument Cluster

14

Engine coolant temperature
gauge: Indicates engine coolant
temperature. At normal operating
temperature, the needle will be in
the normal range (between “H” and
“C”). If it enters the red section,
the engine is overheating. Stop
the vehicle as soon as safely
possible, switch off the engine
and let the engine cool.

Never remove the coolant reservoir cap while the engine is
running or hot.

Odometer: Registers the total miles
(kilometers) of the vehicle.

Trip odometer: Registers the miles
(kilometers) of individual journeys.
Press the control once to switch
from the odometer to the trip
odometer. To reset the trip, press
the control again until the trip reading is 0.0 miles.

Tachometer (if equipped):
Indicates the engine speed in
revolutions per minute. Driving with
your tachometer pointer
continuously at the top of the scale
may damage the engine.

C

H

D

P RN

D

2

Instrument Cluster

15

Battery voltage gauge: Indicates
the battery voltage when the
ignition is in the ON position. If the
pointer moves and stays outside the
normal operating range (as
indicated by arrows), have the
vehicle’s electrical system checked
as soon as possible.

Engine oil pressure gauge:
Indicates engine oil pressure. The
needle should stay in the normal
operating range (between “L” and
“H”). If the needle falls below the
normal range, stop the vehicle, turn
off the engine and check the engine
oil level. Add oil if needed. If the oil
level is correct, have your vehicle
checked at your dealership or by a
qualified technician.

Fuel gauge: Indicates
approximately how much fuel is left
in the fuel tank (when the ignition
is in the ON position). The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.

Refer to Filling the tank in the
Maintenance and Specifications
chapter for more information.

L

H

L

H

E

F

Instrument Cluster

16

AM/FM STEREO CASSETTE (IF EQUIPPED)

1. Balance: Press to shift sound to
the left/right speakers.

2. Fade: Press to shift sound to the
rear/front speakers.

3. CLK: To set the hour, press and
hold CLK. Then press SEEK to
decrease

or increase

the

hours.

To set the minute, press and hold CLK and press TUNE to decrease
or increase

the minutes.

SCAN

BASS

TREB

BAL

FADE

SIDE

EJ

REW

FF

1 - 2

TAPE

AMS

SEEK

TUNE

AM

FM

CLK

1

2

3

4

5

6

FM1

ST

13

14 15 16

17

1

2

3

4

VOL - PUSH ON

12

11

10

9

6

5

8

7

CLK

Entertainment Systems

Entertainment Systems

17