Ford F-650 / 750 (2022 year). Manual in english — page 5
Truck Info
Truck Info
Gauge View
Digital Speedometer
Engine Information
Maintenance Monitor
Transmission Temperature
•
Engine Information - Shows engine hours, engine idle hours and engine oil temp and
oil life.
Settings
Settings
Select Your Setting
Lighting
Vehicle
Advanced
Settings
Easy Entry/Exit
Locks
FordPass
Windows
Wiper Controls
Select Your Setting
Measurement
Units
Displ.
Settings
Temperature
Units
Tire Pressure
Language
73
Information Displays
INFORMATION MESSAGES
Note:
Depending on your vehicle options
and instrument cluster type, not all of the
messages will display or be available. The
information display may abbreviate or
shorten certain messages.
E184451
Press the
OK
button to acknowledge and
remove some messages from the
information display. The information
display will automatically remove other
messages after a short period of time.
You need to confirm certain messages
before you can access the menus.
Adaptive Cruise Control
Action
Message
The radar requires service and is preventing
the adaptive cruise control from engaging.
Adaptive Cruise Malfunction
A condition exists such that the adaptive
cruise cannot function properly.
Adaptive Cruise Not Available
You have a blocked sensor due to
inclement weather, ice, mud or water in
front of the radar sensor. You can typically
clean the sensor to resolve.
Adaptive Cruise Not Available Sensor
Blocked See Manual
The system has disabled the automatic
braking. Verify the system is on, if the
message continues to display have the
system checked as soon as possible.
Normal Cruise Active Adaptive Braking Off
The radar requires service and is preventing
the adaptive cruise control from engaging.
Front Sensor Not Aligned
74
Information Displays
Action
Message
The adaptive cruise has reinstated controls
to the driver. Take control of your vehicle.
Adaptive Cruise - Driver Resume Control
Your vehicle speed is too low to activate
the adaptive cruise. Increase your vehicle's
speed to use the system.
Adaptive Cruise Speed Too Low to Activate
The adaptive cruise is automatically
adjusting the gap distance and you need to
shift the transmission into a lower gear.
Adaptive Cruise Shift Down
Automatic Engine Shutdown
Action
Message
The engine is getting ready to shut off.
Vehicle Shuts Off In {seconds:#0} Seconds
The engine has shut off to help increase
fuel economy.
Vehicle Shut Off to Save Energy
The engine is getting ready to shut off.
Press and hold the
OK
button to override
the system.
Vehicle Shuts Off in {seconds:#0} Seconds
Press Ok to Override
75
Information Displays
Battery and Charging System
Action
Message
The charging system requires service. If the
warning stays on or continues to come on,
have the system checked as soon as
possible.
Check Charging System
The battery management system detects
an extended low-voltage condition. Your
vehicle will disable various features to help
preserve the battery. Turn off as many of
the electrical loads as soon as possible to
help improve system voltage. If the system
voltage has recovered, the disabled
features will operate again as normal.
Low Battery Features Temporarily Turned
Off
The battery management system determ-
ines that the battery is at a low state of
charge. Turn your ignition off as soon as
possible to protect the battery. This
message will clear once you restart your
vehicle and the battery state of charge has
recovered. Turning off unnecessary elec-
trical loads will allow faster battery state-
of-charge recovery.
Turn Power Off To Save Battery
Diesel Messages
WARNING:
When the
Exhaust
Filter Cleaning
message appears in the
information display, do not park near
flammable materials, vapors or
structures until filter cleaning is
complete.
76
Information Displays
Action
Message
Your vehicle has entered the cleaning
mode. Various engine actions raises the
exhaust temperature in the diesel particu-
late filter system to burn off the particles,
exhaust soot. After the vehicle burns the
particles off, the exhaust temperature
returns to normal levels.
Exhaust Filter Cleaning
The diesel particulate filter is full of
particles, exhaust soot, and you are not
operating the vehicle in a manner that
allows normal cleaning. Drive the vehicle
above 30 mph (48 km/h) until the message
clears.
Exhaust Filter Overloaded Drive to Clean
Exhaust Filter Overloaded Clean Now
Exhaust Filter at Limit Clean Now
Exhaust Filter at Limit Drive to Clean Now
The exhaust system temperature exceeded
the intended operating range. If this warning
occurs, a tone sounds, followed by reduced
engine power. The engine shuts down when
your vehicle speed is below 3 mph
(5 km/h). Stop the vehicle as soon as safely
possible. Have the system checked as soon
as possible.
Exhaust System Overheated Stop Safely
NOW
In extremely cold weather, typically below
-15°F (-26°C) and if the engine block heater
is not utilized, your engine will not respond
to accelerator pedal movement for a short
period of time. This restriction allows your
engine to properly circulate the oil to avoid
engine damage.
Engine Warming Please Wait {seconds:00}
sec
The diesel particulate filter is clean.
Exhaust Filter Drive Complete
The diesel filter is clean, operator
commanded regeneration only.
Exhaust Filter Cleaned
The manual regeneration process has
stopped, operator commanded regenera-
tion only.
Exhaust Filter Cleaning Stopped
The distance you can travel before
depleting the remaining diesel exhaust fluid.
DEF Level Low Range: distance
imperial:###0 mi Refill Now
DEF Level Low Range: distance
metric:###0 km Refill Now
77
Information Displays
Action
Message
The diesel exhaust fluid is nearing empty.
Your vehicle's top speed will become
limited in the displayed distance. You must
replenish the diesel exhaust fluid to resume
normal operation of your vehicle. See
Selective Catalytic Reductant System
DEF Level Empty Speed Limited to avg
speed imperial:#0 MPH in distance
imperial:###0 mi
DEF Level Empty Speed Limited to avg
speed metric:#0 km/h in distance
metric:###0 km
The remaining diesel exhaust fluid has
depleted. Upon restart, your vehicle speed
is now limited. You must replenish the
diesel exhaust fluid to resume normal
operation of your vehicle. See
DEF Level Empty Speed Limited to avg
speed imperial:#0 MPH Upon Restart
DEF Level Empty Speed Limited to avg
speed metric:#0 km/h Upon Restart
The diesel exhaust fluid is empty. You must
replenish the diesel exhaust fluid to resume
normal operation of your vehicle. See
Selective Catalytic Reductant System
DEF Level Empty Speed Limited to avg
speed imperial:#0 MPH
DEF Level Empty Speed Limited to avg
speed metric:#0 km/h
The selective catalytic reduction system
detects low exhaust fluid. The engine will
eventually enter into an idle only mode. You
must replenish diesel exhaust fluid to
resume normal operation of your vehicle.
DEF Level Empty Engine Idled Soon
The selective catalytic reduction requires
service and is causing your vehicle to enter
an idle-only mode. If the exhaust fluid is
empty, you must replenish the diesel
exhaust fluid to resume normal operation
of your vehicle. See
DEF Level Empty Engine Idled See Manual
The selective catalytic reduction system
requires service. The system displays your
vehicle's top speed limit and distance
before limitation. Have the system checked
as soon as possible.
DEF Fault Speed Limited to avg speed
imperial:#0 MPH in distance imperial:###0
mi
DEF Fault Speed Limited to avg speed
metric:#0 km/h in distance metric:###0
km
78
Information Displays
Action
Message
The selective catalytic reduction system
requires service. Upon restart, your vehicle
speed is now limited. Have the system
checked as soon as possible.
DEF Fault Speed Limited to avg speed
imperial:#0 MPH Upon Restart
DEF Fault Speed Limited to avg speed
metric:#0 km/h Upon Restart
The selective catalytic reduction system
requires service. The system displays your
vehicle's top speed limit. Have the system
checked as soon as possible.
DEF Fault Speed Limited to avg speed
imperial:#0 MPH
DEF Fault Speed Limited to avg speed
metric:#0 km/h
Have your vehicle checked as soon as
possible. Ignoring this warning message
could lead to reduced drivability and
customer expense, including damage to
the diesel particulate filter. Your new
vehicle warranty may not cover this
damage.
Exhaust Filter Over Limit Service Now
The water separator has reached a prede-
termined capacity and needs draining. See
Draining the Fuel Filter Water Trap
Water in Fuel Drain Filter
A low fuel pressure condition has occurred
due to cold, low fuel level or fuel filters need
to be changed. See
Fuel Pressure Low
Doors and Locks
Action
Message
The driver door is not completely closed.
Close the driver door. If the message
continues to display, have the system
checked as soon as possible.
Driver Door Ajar
The passenger door is not completely
closed. Close the passenger door. If the
message continues to display, have the
system checked as soon as possible.
Passenger Door Ajar
79
Information Displays
Driver Alert
Action
Message
Stop and rest as soon as it is safe to do so.
Driver Alert Warning Rest Now
Take a rest soon.
Driver Alert Warning Rest Suggested
Drivetrain
Action
Message
The electronic locking differential requires
service. Have the system checked as soon
as possible.
Check Locking Differential
Engine
Action
Message
The engine has reduced power to help
reduce high engine temperature. Have the
system checked as soon as possible.
Power Reduced to Lower Engine Temp
Fuel
Action
Message
An early reminder of a low fuel condition.
Refuel your vehicle.
Fuel Level Low
A fuel fill inlet may not be properly closed.
Check Fuel Fill Inlet
80
Information Displays
Lane Departure Warning System
Action
Message
The system has detected a condition that
has caused the system to be temporarily
unavailable. If the message continues to
display, have the system checked as soon
as possible.
Front Camera Temporarily Not Available
The system has detected a condition that
requires you to clean the windshield in order
for it to operate properly.
Front Camera Low Visibility Clean Screen
The system requires service, have the
system checked as soon as possible.
Front Camera Malfunction Service Required
The system requests you to keep your
hands on the steering wheel.
Keep Hands on Steering Wheel
Maintenance
Action
Message
Stop your vehicle as soon as safely possible
and turn off the engine. Check the oil level,
if the warning stays on or continues to come
on with your engine running, have your
vehicle checked as soon as possible.
Low Engine Oil Pressure
The engine oil life is low and needs to be
changed soon.
Change Engine Oil Soon
The engine oil life is low and needs to be
changed immediately.
Oil Change Required
The brake fluid level is low, have the system
checked as soon as possible.
Brake Fluid Level Low
The brake system requires service. Stop
your vehicle in a safe place. Have the
system checked as soon as possible.
Check Brake System
Your vehicle is still in transport or factory
mode. This may not allow some features
to operate properly. Have your vehicle
checked as soon as possible.
Factory Mode Contact Dealer
Transport Mode Contact Dealer
The powertrain requires service.
See Manual
81
Information Displays
Power Steering
Action
Message
The power steering system requires service.
Have the system checked as soon as
possible.
Steering Fault Service Now
The power steering system is not working.
Stop your vehicle in a safe place. Have the
system checked as soon as possible.
Steering Loss Stop Safely
The power steering system, passive entry
or passive entry start system requires
service. Have the system checked as soon
as possible.
Steering Assist Fault Service Required
The steering lock system requires service.
Have the system checked as soon as
possible.
Steering Lock Malfunction Service Now
Pre-Collision Assist
Action
Message
The system requires service. Have the
system checked as soon as possible.
Pre-Collision Assist Not Available
You have a blocked sensor due to
inlcement weather, ice, mud or water in
front of the radar sensor. You can typically
clean the sensor to resolve. If the message
continues to appear, have the system
checked as soon as possible.
Pre-Collision Assist Not Available Sensor
Blocked
Traction Control
Action
Message
The status of the traction control system
after you switched if on. See
Traction Control On
The status of the traction control system
after you switched if off. See
Traction Control Off
82
Information Displays
Transmission
Action
Message
You switched the engine off and the shift
selector is in any position other than park
(P).
Shift to Park
Displays when the brake pedal needs to be
pressed.
Press Brake Pedal
The transmission is overheating and needs
to cool. Stop in a safe place as soon as
possible.
Transmission Over Temperature Stop
Safely
Have the system checked as soon as
possible.
Transmission Service Required
The transmission is overheating and needs
to cool. Stop in a safe place as soon as
possible.
Transmission Too Hot Press Brake
The transmission has limited functionality.
Have the system checked as soon as
possible.
Transmission Limited Function See Manual
A reminder to shift into park (P). In addi-
tion, this message is typical after recon-
necting or recharging the battery until you
cycle the ignition to the on mode. See
Transmission Not in Park
Have the system checked as soon as
possible.
Transmission Fault Service Now
Displays when the transmission has
adjusted the shift strategy.
Transmission Adjusted
Displays when the transmission is adjusting
the shift strategy.
Transmission AdaptMode
Transmission is too cold. Wait for it to warm
up before you drive.
Transmission Warming Up Please Wait
83
Information Displays
Action
Message
Displays when the transmission shift lever
is locked and unable to select gears.
Transmission IndicatMode Lockup On
Displays when the transmission shift lever
is unlocked and free to select gears.
Transmission IndicatMode Lockup Off
The transmission is overheating and needs
to cool. Stop in a safe place as soon as
possible.
Transmission Overheating Stop Safely
84
Information Displays
MANUAL CLIMATE CONTROL
E305247
Note:
Depending on your vehicle option
package, the controls may look different
from what you see here.
Directing the Air
E265283
Press and release the button to
direct air between the
instrument panel air vents,
footwell air vents and windshield air vents
and de-mister.
Setting the Blower Motor Speed
E265389
Turn the control to adjust the volume of
air circulated in the vehicle.
Setting the Temperature
E265862
Turn the control to set the temperature.
Switching the Air Conditioning On
and Off
Press and release the button to
switch the air conditioning on or
off.
Use air conditioning with recirculated air
to improve cooling performance and
efficiency.
Note:
In certain conditions (for example,
maximum defrost), the air conditioning
compressor may continue to operate even
though you switch off the air conditioning.
Switching the Climate Control On
and Off
Press and release the button.
Switching Defrost On and Off
Press and release the button to
distribute air through the
windshield air vents and
de-mister.
85
Climate Control
Air directed to the instrument panel and
footwell air vents turns off. You can also
use this setting to defog and clear the
windshield of a thin covering of ice.
Switching Maximum Air
Conditioning On and Off
Press and release the button for
maximum cooling.
The left-hand and right-hand settings set
to LO, recirculated air flows through the
instrument panel air vents, air conditioning
turns on and the blower motor adjusts to
the highest speed.
Switching Recirculated Air On and
Off
Press and release the button to
switch between outside air and
recirculated air.
The air currently in the passenger
compartment recirculates. This may
reduce the time needed to cool the interior
(when used with A/C) and reduce
unwanted odors from entering your vehicle.
Note:
Recirculated air may turn off (or
prevent you from switching on) in all air flow
modes except MAX A/C to reduce the risk
of fogging. Recirculation may also turn on
and off in various air distribution control
combinations during hot weather in order
to improve cooling efficiency.
HINTS ON CONTROLLING THE
INTERIOR CLIMATE
General Hints
Note:
Prolonged use of recirculated air may
cause the windows to fog up.
Note:
You may feel a small amount of air
from the footwell air vents regardless of the
air distribution setting.
Note:
To reduce humidity build-up inside
your vehicle, do not drive with the system
switched off or with recirculated air always
switched on.
Note:
Do not place objects under the front
seats as this may interfere with the airflow
to the rear seats.
Note:
Remove any snow, ice or leaves from
the air intake area at the base of the
windshield.
Note:
To improve the time to reach a
comfortable temperature in hot weather,
drive with the windows open until you feel
cold air through the air vents.
Quickly Heating the Interior
1.
Adjust the blower motor speed to the
highest speed setting.
2. Adjust the temperature control to the
highest setting.
3. Direct air to the footwell air vents.
Recommended Settings for
Heating
1.
Adjust the blower motor speed to the
center setting.
2. Adjust the temperature control to the
midway point of the hot settings.
3. Direct air to the footwell air vents.
Quickly Cooling the Interior
1.
Select
MAX A/C
.
2. Drive with the windows open for a short
period of time.
Recommended Settings for
Cooling
1.
Adjust the blower motor speed to the
center setting.
2. Adjust the temperature control to the
midway point of the cold settings.
86
Climate Control
3. Direct air to the instrument panel air
vents.
Vehicle Stationary for Extended
Periods During Extreme High
Ambient Temperatures
1.
Apply the parking brake.
2. Place your vehicle in park (P) or
neutral.
3. Select
MAX A/C
.
4. Adjust the blower motor speed to the
lowest speed setting.
Defogging the Side Windows in
Cold Weather
1.
Direct air to the instrument panel and
windshield air vents.
2. Press and release
A/C
.
3. Adjust the temperature control to the
setting you prefer.
4. Adjust the blower motor speed to the
highest setting.
5. Direct air toward the side windows.
6. Close the instrument panel air vents.
HEATED EXTERIOR MIRRORS
(IF EQUIPPED)
Press the button to clear the
exterior mirrors of thin ice and
fog. Press the button again to
switch them off. They switch off after a
short period of time.
Note:
Do not remove ice from the mirrors
with a scraper or adjust the mirror glass
when it is frozen in place. These actions
could cause damage to the glass and
mirrors.
Note:
Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products.
87
Climate Control
SITTING IN THE CORRECT
POSITION
WARNING:
Do not recline the
seatback as this can cause the occupant
to slide under the safety belt, resulting
in serious injury in the event of a crash.
WARNING:
Do not place objects
higher than the seatback to reduce the
risk of serious injury in the event of a
crash or during heavy braking.
E68595
When you use them properly, the seat,
head restraint, safety belt and airbags will
provide optimum protection in the event
of a crash.
We recommend that you follow these
guidelines:
•
Sit in an upright position with the base
of your spine as far back as possible.
•
Do not recline the seatback more than
30 degrees.
•
Adjust the head restraint so that the
top of it is level with the top of your
head and as far forward as possible.
Make sure that you remain
comfortable.
•
Keep sufficient distance between
yourself and the steering wheel. We
recommend a minimum of 10 in
(25 cm) between your breastbone and
the airbag cover.
•
Hold the steering wheel with your arms
slightly bent.
•
Bend your legs slightly so that you can
press the pedals fully.
•
Position the shoulder strap of the
safety belt over the center of your
shoulder and position the lap strap
tightly across your hips.
Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.
HEAD RESTRAINTS
WARNING:
Fully adjust the head
restraint before you sit in or operate your
vehicle. This will help minimize the risk
of neck injury in the event of a crash. Do
not adjust the head restraint when your
vehicle is moving.
WARNING:
The head restraint is a
safety device. Whenever possible it
should be installed and properly
adjusted when the seat is occupied.
Failure to adjust the head restraint
properly could reduce its effectiveness
during certain impacts.
Note:
Adjust the seat backrest to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
88
Seats
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст