Ford F-550 (2017 year). Manual — part 34

Action

Message

Hill descent control mode is deactivated and you must

resume control.

Hill Descent Driver Resume

Control

A hill descent system fault is present.

Hill Descent Control Fault

The hill descent system is cooling due to overuse.

Hill Descent Control Off System

Cooling

The hill descent control system is ready.

Hill Descent Control Ready

Park Aid

Action

Message

The system has detected a condition that requires service.

Contact an authorized dealer. See Rear Parking Aid (page

231).

Check Front Park Aid

The system has detected a condition that requires service.

Contact an authorized dealer. See Rear Parking Aid (page

231).

Check Rear Park Aid

Displays the park aid status.

Front Park Aid On Off

Displays the park aid status.

Rear Park Aid On Off

Park Brake

Action

Message

The electric parking brake is set and a manual release is

attempted without the brake pedal being pressed.

To Release: Press Brake

and Switch

The electric park brake is set and an automatic release is

attempted but cannot be performed. Perform a manual

release.

Park Brake Use Switch

to Release

The electric park brake is set and your vehicle speed exceeds
3 mph (5 km/h). Release park brake before continued driving.

Release Park Brake

The electric park brake is not fully applied.

Park Brake Not Applied

The electric park brake is not fully released.

Park Brake Not Released

Action

Message

The electric park brake system has been put into a special

mode that is used to allow service of the rear brakes. Contact

an authorized dealer.

Park Brake Maintenance

Mode

The electric park brake system has detected a condition that

requires service. Some functionality may still be available.

Contact an authorized dealer.

Park Brake Limited

Function Service

Required

The electric park brake system has detected a condition that

requires service. Contact an authorized dealer.

Park Brake Malfunction

Service Now

Power Steering

Action

Message

The power steering system has detected a condition that

requires service. See an authorized dealer.

Steering Fault Service

Now

The power steering system is not working. Stop your vehicle

in a safe place. Contact an authorized dealer.

Steering Loss Stop

Safely

The power steering system has detected a condition within

the power steering system or passive entry or passive start

system requires service. Contact an authorized dealer.

Steering Assist Fault

Service Required

The steering lock system has detected a condition that

requires service. See an authorized dealer.

Steering Lock Malfunc-

tion Service Now

Remote Start

Action

Message

A reminder to apply the brake and push the gearshift button

to drive your vehicle after a remote start.

To Drive: Press Brake

and Gear Shift Button

Seats

Action

Message

A reminder that memory seats are not available while driving.

Memory Recall Not

Permitted While Driving

Shows where you have saved your memory setting.

Memory {0} Saved

Starting System

Action

Message

A reminder to apply the brake when starting your vehicle .

To START Press Brake

The starter has exceeded its cranking time in attempting to

start your vehicle.

Cranking Time Exceeded

The starter is attempting to start your vehicle.

Engine Start Pending

Please Wait

The system has cancelled the pending start.

Pending Start Cancelled

Tire Pressure Monitoring System

Action

Message

One or more tires on your vehicle has low tire pressure. See

Tire Pressure Monitoring System (page 390).

Tire Pressure Low

The tire pressure monitoring system is malfunctioning. If the

warning stays on or continues to come on, contact an

authorized dealer. See Tire Pressure Monitoring System

(page 390).

Tire Pressure Monitor

Fault

A tire pressure sensor is malfunctioning or your spare tire is in

use. See Tire Pressure Monitoring System (page 390). If

the warning stays on or continues to come on, contact an

authorized dealer as soon as possible.

Tire Pressure Sensor

Fault

Trailer

Action

Message

The current gain setting for the trailer brake.

Trailer Brake Gain: {trailer gain

value:#0.0}

The current gain setting for the trailer brake when a

trailer is not connected.

Trailer Brake Gain: {trailer gain

value:#0.0} No Trailer

Faults sensed in the Integrated Trailer Brake Control

Module followed by a single chime. See Towing a

Trailer (page 268).

Trailer Brake Module Fault

A correct trailer connection is sensed during a given

ignition cycle.

Trailer Connected

Action

Message

A trailer connection becomes disconnected, either

intentionally or unintentionally, and has been sensed

during a given ignition cycle.

Trailer Disconnected

The trailer sway control has detected trailer sway.

Trailer Sway Reduce Speed

There are certain faults in your vehicle wiring and trailer
wiring/brake system. See Towing a Trailer (page 268).

Trailer Wiring Fault

There is a fault with your trailer turn lamp. Check your

lamp.

Trailer Left Turn Lamps Fault

Check Lamps

There is a fault with your trailer turn lamp. Check your

lamp.

Trailer Right Turn Lamps Fault

Check Lamps

There is a fault with your trailer battery. See Towing

a Trailer (page 268).

Trailer Battery Not Charging See

Manual

There is a fault with your vehicle trailer lighting module.

See Towing a Trailer (page 268).

Trailer Lighting Module Fault

See Manual

One or more tires on your trailer is below the specified

tire pressure.

Trailer Tire Low Specified:

A trailer tire pressure sensor is malfunctioning. If the

warning stays on or continues to come on, contact an

authorized dealer as soon as possible.

Trailer Tire Pressure Sensor

Fault

The trailer tire pressure monitoring system is

malfunctioning. If the warning stays on or continues

to come on, contact an authorized dealer.

Trailer Tire Pressure Monitor

Fault

The system cannot detect the trailer tire pressure

monitoring system.

Trailer Tire Pressure Monitor

Capability Not Detected

The trailer tire pressure monitoring system is not setup.

See General Information (page 111).

Trailer Tire Pressure Indication

Not Setup See Manual