Ford Focus RS (2011 year). Instruction — part 8
D-Pillar Trim Panel — 5-Door
1. Remove the Package tray trim panel.
2. Tilt the rear seat backrest forward.
3. Remove the C-pillar trim.
Trim and Ornamentation, Removal and
Installation).
4. Remove the components in the order
indicated in the following illustration(s) and
table(s).
1
E51575
4
2
3
Description
Item
Liftgate opening weatherstrip
See Removal Detail
1
Package tray support trim panel retaining
screws
2
Description
Item
Package tray support trim panel
See Removal Detail
3
Package tray support trim panel retaining
clips
See Installation Detail
4
G413489en
501-05-
16
Interior Trim and Ornamentation
501-05-
16
REMOVAL AND INSTALLATION
For additional information, refer to:
C-Pillar
Trim Panel - 4-Door/5-Door
(501-05 Interior
E51749
8
5
7
6
Description
Item
D-pillar trim panel retaining screw cover
See Removal Detail
5
D-pillar trim panel retaining screws.
6
Description
Item
D-pillar trim panel
7
D-pillar trim panel retaining clips
See Installation Detail
8
5. To install, reverse the removal procedure.
Removal Details
Item 1
Liftgate opening weatherstrip
1. Detach the liftgate opening weatherstrip.
Item 3
Package tray support trim panel
1. Detach the package tray support trim panel.
• Pull the package tray support trim panel away
from the rear quarter body panel to release
the retaining tang from the D-pillar trim panel.
• Feed the rear seatbelt harness through the
package tray support trim panel.
E50672
G413489en
501-05-
17
Interior Trim and Ornamentation
501-05-
17
REMOVAL AND INSTALLATION
Item 5
D-pillar trim panel retaining screw cover
1. Remove the D-pillar trim panel retaining
screw cover.
E51607
Installation Details
Item 4
Package tray support trim panel retaining
clips
1. Install the package tray support trim panel
retaining clips to the trim panel before the
trim panel is installed to the vehicle.
Item 8
D-pillar trim panel retaining clips
1. Install the D-pillar trim panel retaining clips
trim panel before the trim panel is installed
to the vehicle.
G413489en
501-05-
18
Interior Trim and Ornamentation
501-05-
18
REMOVAL AND INSTALLATION
Front Door Trim Panel — 3-Door
1. Disconnect the battery ground cable.
Mounting and Cables, General Procedures).
2. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51567
1
2
5
3
4
5 Nm
Description
Item
Front door latch remote control handle
bezel
See Removal Detail
1
Front door pull handle cover
2
Description
Item
Front door power window control unit
electrical connector
See Removal Detail
3
Front door pull handle retaining bolts
4
Front door trim panel
See Removal Detail
5
G414284en
501-05-
19
Interior Trim and Ornamentation
501-05-
19
REMOVAL AND INSTALLATION
For additional information, refer to:
Battery
Disconnect and Connect
(414-01 Battery,
E51424
7
7
6
Description
Item
Power window control unit
6
Front door trim panel retaining clips
See Removal Detail
See Installation Detail
7
3. To install, reverse the removal procedure.
4. Initialize the door window motors.
Frames and Mechanisms, General
Procedures).
Removal Details
G414284en
501-05-
20
Interior Trim and Ornamentation
501-05-
20
REMOVAL AND INSTALLATION
Window Motor Initialization
(501-11 Glass,
For additional information,
refer to: Door
Item 1
Front door latch remote control handle
bezel
1. Remove the front door latch remote control
bezel.
• Disconnect the remote keyless entry door
lock button (if equipped).
E51990
Item 3
Front door power window control unit
electrical connector
1. Disconnect the front door power window
control unit electrical connector.
E39524
Item 5
Front door trim panel
1. Remove the front door trim panel.
E40796
Item 7
Front door trim panel retaining clips
1. Remove the front door trim panel retaining
clips.
1. Release the front door trim panel retaining
clip locking tang.
2. Remove the front door trim panel retaining
clip.
E41041
1
2
Installation Details
Item 7
Front door trim panel retaining clips
1. Install the front door trim retaining clips to
the front door trim panel.
G414284en
501-05-
21
Interior Trim and Ornamentation
501-05-
21
REMOVAL AND INSTALLATION
Front Door Trim Panel — 4-Door/5-Door/Wagon
1. Disconnect the battery ground cable.
Mounting and Cables, General Procedures).
2. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E39522
4
2
3
5
1
8 Nm
Description
Item
Front door latch remote control handle
bezel
See Removal Detail
1
Front door pull handle cover
2
Description
Item
Front power window control unit electrical
connector
See Removal Detail
3
G414285en
501-05-
22
Interior Trim and Ornamentation
501-05-
22
REMOVAL AND INSTALLATION
Disconnect and Connect
(414-01 Battery,
For additional information,
refer to: Battery
Description
Item
Front door pull handle retaining bolts
4
Description
Item
Front door trim panel
See Removal Detail
5
E39523
6
7
7
Description
Item
Front door power window control unit
bezel (front door trim panel pull handle
shown removed for clarity)
6
Front door trim panel retaining clips
See Removal Detail
See Installation Detail
7
3. To install, reverse the removal procedure.
4. Initialize the door window motors.
Frames and Mechanisms, General
Procedures).
G414285en
501-05-
23
Interior Trim and Ornamentation
501-05-
23
REMOVAL AND INSTALLATION
Window Motor Initialization
(501-11 Glass,
For additional information,
refer to: Doo
r
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст