Ford Focus RS (2011 year). Instruction — part 25
3-door
6.
E52375
7.
E52376
8.
E52377
2
1
All vehicles
9.
E0003004
10.
E66167
11.
E66170
G545260en
501-10-
24
Seating
501-10-
24
REMOVAL AND INSTALLATION
12.
E66168
13.
CAUTION: Equal pressure should be
applied to both surfaces of the hook
loop tape.
E65710
14.
E53189
3-door
15.
E66169
Installation
WARNING: Make sure that the seat
backrest heater mat (if equipped) is
correctly located with the seat backrest
cover hook loop tape.
1. To install, reverse the removal procedure.
G545260en
501-10-
25
Seating
501-10-
25
REMOVAL AND INSTALLATION
Front Seat Backrest Cover — 2.5L Duratec-RS (224kW/305PS)
- VI5(40 108 0)
Special Tool(s)
501-125
E84511
Removal
NOTE: Removal steps in this procedure may
contain installation details.
Removal and Installation).
2. Special Tool(s): 501-125
E116428
501-125
3. Special Tool(s): 501-125
E116455
1
2
3
501-125
4. Special Tool(s): 501-125
E116456
501-125
Installation
1. To install, reverse the removal procedure.
G1155787en
501-10-
26
Seating
501-10-
26
REMOVAL AND INSTALLATION
1.
Refer to: Front Seat - 2.5L Duratec-RS
(224kW/305PS) - VI5
(501-10 Seating,
Remover, Grab Handle Cover
Front Seat Cushion Cover — 2.5L Duratec-ST (166kW/226PS) -
VI5(40 105 0)
Removal
All vehicles
CAUTION: Take extra care not to damage
the wiring harnesses.
NOTE: Removal steps in this procedure may
contain installation details.
1.
TIE39481
1
2
2
2.
E50104
3.
E39482
x7
1
2
3-door
4.
Torque: 23 Nm
1.
E65711
1
2
3
4
G545261en
501-10-
27
Seating
501-10-
27
REMOVAL AND INSTALLATION
5-door
5. Torque: 23 Nm
E65712
All vehicles
6.
E66231
7.
E66232
8.
E66233
9.
E66234
10.
E66235
G545261en
501-10-
28
Seating
501-10-
28
REMOVAL AND INSTALLATION
11.
CAUTION: Equal pressure must be
applied to both surfaces of the hook and
loop tape.
E65713
12. Remove the front passenger seat safety belt
minder sensor (if equipped).
E65714
Installation
1. WARNINGS:
Make sure that the safety belt minder
sensor (if equipped) is correctly located
with the seat cushion cover and the seat
cushion heater mat (if equipped).
Make sure that the seat cushion heater
mat (if equipped) is correctly located
with the seat cushion cover hook and
loop tape.
To install, reverse the removal procedure.
G545261en
501-10-
29
Seating
501-10-
29
REMOVAL AND INSTALLATION
Front Seat Cushion Cover — 2.5L Duratec-RS (224kW/305PS) -
VI5(40 105 0)
Special Tool(s)
501-125
Remover, Grab Handle Cover
E84511
General Equipment
Cable Ties
Removal
NOTE: Removal steps in this procedure may
contain installation details.
Removal and Installation).
2. General Equipment: Cable Ties
Torque: 23 Nm
E116427
x4
3. Special Tool(s): 501-125
E116454
501-125
4.
G1155788en
501-10-
30
Seating
501-10-
30
REMOVAL AND INSTALLATION
1.
Refer to: Front Seat - 2.5L Duratec-RS
(224kW/305PS) - VI5
(501-10 Seating,
E116429
x13
Installation
1. To install, reverse the removal procedure.
G1155788en
501-10-
31
Seating
501-10-
31
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст