Ford Focus RS (2011 year). Instruction — part 39
Item 6
Glove compartment lamp switch
1. Detach the glove compartment lamp switch
from the instrument panel.
E51158
Item 8
Registers
1. NOTE: This step is only necessary if
installing a new instrument panel.
NOTE: The registers are retained by four locking
tangs. Releasing the upper locking tangs will
provide enough movement to release the lower
locking tangs.
Remove the registers.
• Using a suitable thin bladed screwdriver,
release the upper locking tangs.
E50636
Item 9
Cigar lighter
1. Disconnect the cigar lighter electrical
connectors.
E51620
2. NOTE: This step is only necessary if
installing a new instrument panel.
Remove the cigar lighter.
E51407
Item 10
Keyless entry antenna (if equipped)
1. Disconnect the keyless entry antenna
electrical connector.
E51621
2. NOTE: This step is only necessary if
installing a new instrument panel.
G388101en
501-12-
9
Instrument Panel and Console
501-12-
9
REMOVAL AND INSTALLATION
Remove the keyless entry antenna.
E51622
Item 11
Instrument panel
1. Detach the glove compartment lid damper
from the glove compartment lid.
E51408
2. Remove the instrument panel.
• Pull the instrument panel rearwards away
from the extension panel to release the
retaining clips.
E48163
3. Remove the passenger air bag module (if
equipped).
E76191
x6
7 Nm
G388101en
501-12-
10
Instrument Panel and Console
501-12-
10
REMOVAL AND INSTALLATION
Floor Console
Removal
1.
On both sides.
1.
E123908
1
2.
G1263421en
501-12-
11
Instrument Panel and Console
501-12-
11
REMOVAL AND INSTALLATION
E123909
Installation
1. To install, reverse the removal procedure.
G1263421en
501-12-
12
Instrument Panel and Console
501-12-
12
REMOVAL AND INSTALLATION
Floor Console — Vehicles Built From: 03/2007, Vehicles With:
Center Armrest
Removal
1.
x2
x2
E99758
2.
G1061453en
501-12-
13
Instrument Panel and Console
501-12-
13
REMOVAL AND INSTALLATION
E99759
3.
x2
E99760
Installation
1. To install, reverse the removal procedure.
G1061453en
501-12-
14
Instrument Panel and Console
501-12-
14
REMOVAL AND INSTALLATION
Overhead Console
1. Remove the components in the order
indicated in the following illustration(s) and
table(s).
TIE41114
1
3
2
Description
Item
Interior lamp
See Removal Detail
1
Overhead console
See Removal Detail
See Installation Detail
2
Microphone (if equipped)
See Removal Detail
3
2. To install, reverse the removal procedure.
Removal Details
G296318en
501-12-
15
Instrument Panel and Console
501-12-
15
REMOVAL AND INSTALLATION
Item 1
Interior lamp
1. Using a suitable screwdriver, detach the
interior lamp from the overhead console.
TIE0024489
2. Disconnect the electrical connectors and
remove the interior lamp.
TIE41291
Item 2
Overhead console
1. Detach the overhead console from the
overhead console reinforcement.
TIE42349
2. Disconnect the power roof opening panel
control switch electrical connector.
3. Disconnect the microphone electrical
connector (if equipped).
Item 3
Microphone (if equipped)
1. Detach the microphone wiring harness from
the overhead console.
E39457
2. NOTE: Note the position of the microphone
to aid installation.
Remove the microphone.
• Release the locking tangs.
E39458
Installation Details
G296318en
501-12-
16
Instrument Panel and Console
501-12-
16
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст