Ford Focus RS (2011 year). Instruction — part 50
Hood Latch
1. Remove the air deflector.
E112650
x4
2. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G410710en
501-14-
79
Handles, Locks, Latches and Entry Systems
501-14-
79
REMOVAL AND INSTALLATION
4
7
6
1
2
5
9 Nm
E51247
3
Description
Item
Coolant expansion tank to radiator hose
See Removal Detail
1
Coolant expansion tank to coolant outlet
connector hose
See Removal Detail
2
Hood latch retaining bolts
See Installation Detail
3
Hood latch
See Removal Detail
See Installation Detail
4
Description
Item
Hood latch electrical connector
5
Hood lock cylinder connecting clip
See Removal Detail
See Installation Detail
6
Hood lock cylinder connecting shaft
See Removal Detail
See Installation Detail
7
3. To install, reverse the removal procedure.
Removal Details
Item 1
Coolant expansion tank to radiator hose
1. Detach the coolant expansion tank to
radiator hose from the coolant hose retaining
clamp.
Item 2
Coolant expansion tank to coolant outlet
connector hose
1. Detach the coolant expansion tank to coolant
outlet connector hose from the hose
retaining clamp.
Item 4
Hood latch
1. NOTE: Make a note of the position and
orientation of the hood lock cylinder
connecting clip.
G410710en
501-14-
80
Handles, Locks, Latches and Entry Systems
501-14-
80
REMOVAL AND INSTALLATION
Detach the hood lock cylinder to hood latch
rod swivel joint from the hood latch
connecting clip.
E51249
Item 6
Hood lock cylinder connecting clip
1. NOTE: Make a note of the position and
orientation of the hood lock cylinder
connecting shaft.
Remove the hood lock cylinder connecting
clip from the hood lock cylinder connecting
shaft (hood latch shown removed for clarity).
E51248
Item 7
Hood lock cylinder connecting shaft
1. NOTE: Make a note of the position and
orientation of the hood lock cylinder
connecting shaft.
Remove the hood lock cylinder connecting
shaft from the hood latch.
• Discard the hood lock cylinder connecting
shaft.
E41572
Installation Details
Item 7
Hood lock cylinder connecting shaft
1. NOTE: Make sure that the hood lock cylinder
connecting shaft is installed in the same
position and alignment as removed.
NOTE: Make sure that the hood lock cylinder
connecting shaft clips are facing the correct way.
The long clips of the hood lock cylinder connecting
shaft should be installed into the hood latch.
G410710en
501-14-
81
Handles, Locks, Latches and Entry Systems
501-14-
81
REMOVAL AND INSTALLATION
Install the hood lock cylinder connecting
shaft to the hood latch.
E41572
Item 6
Hood lock cylinder connecting clip
1. NOTE: Make sure that the hood lock cylinder
connecting shaft clips are facing the correct
way. The short clips of the hood lock cylinder
connecting shaft should be installed into the
hood lock cylinder connecting clip.
NOTE: The hood lock cylinder connecting shaft
clips must be compressed before being installed
into the hood lock cylinder connecting clip.
Using a suitable flat bladed screwdriver,
install the hood lock cylinder connecting clip
to the hood lock cylinder connecting shaft
(hood latch shown removed for clarity).
E51248
Item 4
Hood latch
1. Connect the hood lock cylinder shaft swivel
joint to the hood latch connecting clip.
E51249
Item 3
Hood latch retaining bolts
1. Tighten the hood latch retaining bolts.
• Adjust the hood latch so that the hood
alignment is correct.
General Procedures).
G410710en
501-14-
82
Handles, Locks, Latches and Entry Systems
501-14-
82
REMOVAL AND INSTALLATION
For additional information,
refer to: Hood
Alignment
(501-02 Front End Body Panels,
Front Door Latch — 3-Door
General Equipment
Electric hand drill
Rivet gun
Materials
Specification
Name
WSK-M2G349-A7
Adhesive - Loctite 243
1. Remove the front door trim panel.
For additional information,
refer to: Front
Door Trim Panel - 3-Door
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
2. Remove the exterior front door handle.
For additional information,
refer to: Exterior
Front Door Handle
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Connect the battery ground cable.
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
grommets.
E42003
5. NOTE: Support the front door power window
control unit.
Connect the front door power window control
switch electrical connector.
E39524
6. Using the front door power window control
switch, align the window glass clamp
retaining bolts with the access holes.
E42003
7. Loosen the front door window glass clamp
retaining bolts.
TIE39519
8 Nm
8. Raise the front door window glass.
G410714en
501-14-
83
Handles, Locks, Latches and Entry Systems
501-14-
83
REMOVAL AND INSTALLATION
For additional information,
refer to: Battery
4. Remove the front door window regulator
9. Disconnect the front door power window
control switch electrical connector.
E39524
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G410714en
501-14-
84
Handles, Locks, Latches and Entry Systems
501-14-
84
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G410714en
501-14-
85
Handles, Locks, Latches and Entry Systems
501-14-
85
REMOVAL AND INSTALLATION
Description
Item
Door check strap retaining bolt
4
Door hinge retaining bolts
See Removal Detail
5
Description
Item
See Installation Detail
Door (left-hand door shown)
See Removal Detail
6
8 Nm
E51750
8
13
12
9
10
11
7
8 Nm
8 Nm
Description
Item
Front door handle, lock and latch retaining
bracket retaining screw
7
Front door latch retaining bolts
8
Front door wiring harness retaining clip
See Removal Detail
9
Front door latch remote control cable
See Removal Detail
10
Description
Item
Front door wiring harness
See Removal Detail
11
Front door lock actuator retaining screw
See Removal Detail
See Installation Detail
12
Front door inner panel
See Removal Detail
See Installation Detail
13
G410714en
501-14-
86
Handles, Locks, Latches and Entry Systems
501-14-
86
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст