Ford Focus RS (2011 year). Instruction — part 47
PINPOINT TEST N : DTC: B1082
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
N1: CHECK CIRCUIT 1/2-AB34 (WH/RD) FOR SHORT TO GROUND
1 Disconnect Keyless Vehicle Module C219.
2 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB34
(WH/RD), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB34 (WH/RD) or 2-AB34
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
N2: CHECK CIRCUIT 2-AB34 (GY/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB34
(WH/RD), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB34 (WH/RD) or 2-AB34
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST O : DTC: B1077
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
O1: CHECK CIRCUIT 1/2-AB16 (WH/RD) FOR SHORT TO GROUND
1 Disconnect Keyless Vehicle Module C218.
G167639en
501-14-
55
Handles, Locks, Latches and Entry Systems
501-14-
55
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
GO to N2
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
2 Measure the resistance between the keyless
vehicle module C218 pin 20, circuit 1-AB16
(WH/RD), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57507
REPAIR circuit 1-AB16 (WH/RD) or 2-AB16
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
O2: CHECK CIRCUIT 1/2-AB16 (WH/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C218 pin 20, circuit 1-AB16
(WH/RD), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57507
REPAIR circuit 1-AB16 (WH/RD) or 2-AB16
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST P : DTC: B1083
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
P1: CHECK CIRCUIT 1-AB27 (WH/RD) FOR SHORT CIRCUIT TO GROUND
1 Disconnect Keyless Vehicle Module C218.
G167639en
501-14-
56
Handles, Locks, Latches and Entry Systems
501-14-
56
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
GO to O2
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
2 Measure the resistance between the keyless
vehicle module C218 pin 22, circuit 1-AB27
(WH/RD), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57603
REPAIR circuit 1-AB27 (WH/RD) or 2-AB27
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
P2: CHECK CIRCUIT 2-AB27 (GY/RD) FOR SHORT CIRCUIT TO GROUND
1 Disconnect Passenger Side Exterior Front Door
Handle C203.
2 Measure the resistance between the keyless
vehicle module C218 pin 22, circuit 1-AB27
(WH/RD), harness side and battery positive.
• Is the resistance greater than 10,000 ohms?
ൺ
Yes
E57603
REPAIR circuit 1-AB27 (WH/RD) or 2-AB27
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
PINPOINT TEST Q : DTC: B1086
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
Q1: CHECK CIRCUIT 1/2-AB10 (WH) FOR SHORT TO GROUND
1 Disconnect Keyless Vehicle Module C219.
G167639en
501-14-
57
Handles, Locks, Latches and Entry Systems
501-14-
57
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
TEST the system for normal operation.
GO to P2
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
2 Measure the resistance between the keyless
vehicle module C219 pin 14, circuit 1-AB10
(WH), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57508
REPAIR circuit 1-AB10 WH) or 2-AB10 (GY).
TEST the system for normal operation.
ൺ
No
Q2: CHECK CIRCUIT 1/2-AB16 (GY/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 14, circuit 1-AB10
(WH), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57508
REPAIR circuit 1-AB10 (WH) or 2-AB10 (GY).
TEST the system for normal operation.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST R : DTC: B1070
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
R1: CHECK CIRCUIT 1/2-AB35 (WH/BU) FOR SHORT TO GROUND
1 Disconnect Keyless Vehicle Module C219.
2 Measure the resistance between the keyless
vehicle module C219 pin 18, circuit 1-AB35
(WH/BU), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E74073
REPAIR circuit 1-AB35 (WH/BU) or 2-AB35
(GY/VT). TEST the system for normal opera-
tion.
ൺ
No
G167639en
501-14-
58
Handles, Locks, Latches and Entry Systems
501-14-
58
DIAGNOSIS AND TESTING
GO to R2.
REFER to: Keyless Vehicle Module
(501-14
GO to Q2
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
R2: CHECK CIRCUIT 1/2-AB35 (GY/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 18, circuit 1-AB35
(WH/BU), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E74073
REPAIR circuit 1-AB35 (WH/BU) or 2-AB35
(GY/VT). TEST the system for normal opera-
tion.
ൺ
No
R3: CHECK CIRCUIT 1/2-AB35 (WH/BU) FOR SHORT TO GROUND
1 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB35A
(WH/BU), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB35A (WH/BU) or 2-AB35A
(GY/VT). TEST the system for normal opera-
tion.
ൺ
No
R4: CHECK CIRCUIT 1/2-AB35 (GY/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB35A
(WH/BU), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB35A (WH/BU) or 2-AB35A
(GY/VT). TEST the system for normal opera-
tion.
ൺ
No
G167639en
501-14-
59
Handles, Locks, Latches and Entry Systems
501-14-
59
DIAGNOSIS AND TESTING
GO to R5
.
GO to R4
.
GO to R3
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
R5: CHECK CIRCUIT 1/2-AB36B (GY/OG) FOR SHORT TO GROUND
1 Measure the resistance between the keyless
vehicle module C219 pin 22, circuit 1-AB36A
(GY/OG), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57603
REPAIR circuit 1-AB36A (GY/OG) or 2-AB36A
(WH/GN). TEST the system for normal opera-
tion.
ൺ
No
R6: CHECK CIRCUIT 1/2-AB35 (GY/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 22, circuit 1-AB36A
(WH/GN), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57603
REPAIR circuit 1-AB36A (GY/OG) or 2-AB36A
(WH/GN). TEST the system for normal opera-
tion.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST S : DTC: B1070
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
S1: CHECK CIRCUIT 1-AB36B (WH/GN) FOR SHORT CIRCUIT TO GROUND
1 Disconnect Keyless Vehicle Module C219.
G167639en
501-14-
60
Handles, Locks, Latches and Entry Systems
501-14-
60
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
GO to R6
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
2 Measure the resistance between the keyless
vehicle module C219 pin 22, circuit 1-AB36B
(WH/GN), harness side and ground.
• Is the resistance greater than 10,000 ohms?
ൺ
Yes
E57603
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
ൺ
No
GO to S2.
S2: CHECK CIRCUIT 2-AB36B (GY/OG) FOR SHORT CIRCUIT TO GROUND
1 Disconnect Passenger Compartment Center
Keyless Vehicle Antenna C226.
2 Measure the resistance between the keyless
vehicle module C219 pin 4, circuit 2-AB36B
(GY/OG), harness side and ground.
• Is the resistance greater than 10,000 ohms?
ൺ
Yes
E57602
GO to S3.
ൺ
No
REPAIR circuit 2-AB36B (GY/OG). TEST the
system for normal operation.
S3: CHECK CIRCUIT 1-AB36B (WH/GN) FOR SHORT CIRCUIT TO GROUND
1 Measure the resistance between the keyless
vehicle module C219 pin 22, circuit 1-AB36B
(WH/GN), harness side and ground.
• Is the resistance greater than 10,000 ohms?
ൺ
Yes
E57603
INSTALL a new passenger compartment
center keyless vehicle antenna. TEST the
system for normal operation.
ൺ
No
REPAIR circuit 1-AB36B (WH/GN). TEST the
system for normal operation.
G167639en
501-14-
61
Handles, Locks, Latches and Entry Systems
501-14-
61
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
PINPOINT TEST T : DTC: B1071
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
T1: CHECK CIRCUIT 1-AB34 (WH/RD) FOR SHORT CIRCUIT TO GROUND
1 Disconnect Keyless Vehicle Module C219.
2 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB34
(WH/RD), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB34 (WH/RD) or 2-AB34
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
GO to T2.
T2: CHECK CIRCUIT 1/2-AB34 (WH/RD) FOR SHORT TO BATTERY POSITIVE
1 Measure the resistance between the keyless
vehicle module C219 pin 2, circuit 1-AB34
(WH/RD), harness side and battery positive.
• Is the resistance less than 5 ohms?
ൺ
Yes
E57502
REPAIR circuit 1-AB34 (WH/RD) or 2-AB34
(GY/RD). TEST the system for normal opera-
tion.
ൺ
No
Using WDS, CLEAR the DTC. TEST the
system for normal operation. If the DTC is still
present, INSTALL a new keyless vehicle
module.
Handles, Locks, Latches and Entry Systems,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST U : DTC: B1072
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
U1: CHECK CIRCUIT 1-AB16 FOR OPEN CIRCUIT
1 Disconnect Keyless Vehicle Module C218.
2 Disconnect Driver Side Exterior Front Door
Handle Keyless Vehicle Antenna C211.
G167639en
501-14-
62
Handles, Locks, Latches and Entry Systems
501-14-
62
DIAGNOSIS AND TESTING
REFER to: Keyless Vehicle Module
(501-14
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст