Ford Focus RS (2011 year). Instruction — part 15
18
19
20
21
E51009
Description
Item
Door opening weatherstrips
See Removal Detail
18
B-pillar trim panel retaining screw trim
covers
19
Description
Item
B-pillar trim panel retaining screws
20
B-pillar trim panels
See Removal Detail
See Installation Detail
21
G410776en
501-05-
72
Interior Trim and Ornamentation
501-05-
72
REMOVAL AND INSTALLATION
22
23
31
E51464
24
26
27
25
29
30
28
Description
Item
Rear passenger assist handles
See Removal Detail
22
Headliner retaining clips
23
Glasses holder
See Removal Detail
24
Front passenger assist handle
See Removal Detail
25
Sun visors
26
Sun visor retaining clips
See Removal Detail
27
Description
Item
Roof wiring harness ground connection
retaining bolt
See Removal Detail
28
Auto-dimming interior mirror trim covers
See Removal Detail
29
Auto-dimming interior mirror and rain
sensor electrical connectors
30
Headliner trim panel
See Removal Detail
See Installation Detail
31
G410776en
501-05-
73
Interior Trim and Ornamentation
501-05-
73
REMOVAL AND INSTALLATION
35
32
33
E51465
38
36
37
34
Description
Item
Sunvisor illumination lamp electrical
connectors
See Installation Detail
32
Radio frequency (RF) receiver
See Removal Detail
33
Rear interior lamp electrical connectors
34
Roof wiring harness
See Removal Detail
See Installation Detail
35
Sunvisor illumination lamps
See Removal Detail
36
Description
Item
Rear interior lamp
See Removal Detail
37
Rear window washer tube
See Removal Detail
See Installation Detail
38
11. To install, reverse the removal procedure.
12. Vehicles with global closing, initialize the
door window motors.
Window Motor Initialization
(501-11 Glass,
Frames and Mechanisms, General
Procedures).
Removal Details
G410776en
501-05-
74
Interior Trim and Ornamentation
501-05-
74
REMOVAL AND INSTALLATION
For additional information,
refer to: Door
Item 4
Glove compartment cooling hose
1. Detach the glove compartment cooling hose
from the glove compartment cooling vent.
E51010
Item 5
Moving pictures experts group audio
layer 3 (MP3) auxiliary connector electrical
connector
CAUTION: Do not place excessive strain
on the electrical wiring harness when
detaching the glove compartment.
1. Reposition the glove compartment and
disconnect the MP3 auxiliary connector
electrical connector.
Item 11
Noise, vibration and harshness (NVH)
material
1. Detach the NVH material from the upper
A-pillar area to gain access to the roof wiring
harness retaining clip.
Item 13
Roof wiring harness
1. Attach a
draw cord to the
roof wiring harness
and
CJB electrical connector
. Feed the wiring
harness
through the NVH
material to above
the
instrument panel A-pillar
area.
Item 14
Rear quarter window glass trim panel
retaining screw trim covers
CAUTION: Care must be taken not to
damage the rear quarter window glass trim
panels and retaining screw trim covers.
1. Using a suitable flat blade screwdriver, lever
out the rear quarter window glass trim panel
retaining screw trim covers.
E51011
Item 16
Rear quarter window glass trim panels
1. Detach the rear quarter window glass trim
panel to B-pillar trim panel retaining clip.
Item 18
Door opening weatherstrips
1. Detach the door opening weatherstrips from
the door opening upper area.
Item 21
B-pillar trim panels
1. Detach the B-pillar trim panels and position
them to one side.
E51012
G410776en
501-05-
75
Interior Trim and Ornamentation
501-05-
75
REMOVAL AND INSTALLATION
Item 22
Rear passenger assist handles
1. Lever open the rear passenger assist handle
screw covers.
MPE0002639
1
2
2. Remove the rear passenger assist handle
retaining screws.
Item 24
Glasses holder
1. Lever open the glasses holder retaining
screw covers.
1
2
E51013
2. Remove the glasses holder retaining screws.
Item 25
Front passenger assist handle
1. Lever open the front passenger assist handle
retaining screw covers.
MPE0002639
1
2
2. Remove the front passenger assist handle
retaining screws.
Item 27
Sun visor retaining clips
1. Lever open the sun visor retaining clip
retaining screw cover.
1
2
E51015
2. Remove the sun visor retaining clip retaining
screw.
G410776en
501-05-
76
Interior Trim and Ornamentation
501-05-
76
REMOVAL AND INSTALLATION
Item 28
Roof wiring harness ground connection
retaining bolt
1. Detach the roof wiring harness and
windscreen ground electrical connectors.
E51014
Item 29
Auto-dimming interior mirror trim
covers
1. Remove the auto-dimming interior mirror
and rain sensor trim covers.
1. Release the locking clips.
2. Slide the rain sensor trim cover off the
auto-dimming interior mirror trim cover.
1
2
E51017
Item 30
Auto-dimming interior mirror and rain
sensor electrical connectors
1. Disconnect the auto-dimming interior mirror
and rain sensor electrical connectors.
E51018
Item 31
Headliner trim panel
1. Tilt the front seats forward.
2. With the aid of another technician, remove
the headliner through the liftgate opening.
Item 33
Radio frequency (RF) receiver
NOTE: Make a note of the position of the RF
receiver to make sure that it is installed in exactly
the same position as when removed.
1. Using a suitable knife, detach the RF receiver
from the headliner.
E51463
Item 35
Roof wiring harness
CAUTIONS:
Take care not to damage the insulation of
the roof wiring harness.
The roof wiring harness must be cut off
the headliner and not pulled or ripped.
Failure to follow this instruction could
G410776en
501-05-
77
Interior Trim and Ornamentation
501-05-
77
REMOVAL AND INSTALLATION
result in the incorrect function of electrical
components.
NOTE: Make a note of the position of the roof
wiring harness to make sure that it is installed in
exactly the same position as when removed.
1. Using a suitable knife, remove the roof wiring
harness from the headliner.
Item 36
Sunvisor illumination lamps
1. Release the sun visor illumination lamp
retaining clips.
E51019
Item 37
Rear interior lamp
1. Lever out the rear interior lamp.
MPE0005082
Item 38
Rear window washer tube
CAUTION: Take care not to damage the
rear window washer tube. Failure to follow
this instruction could result in damage to
the headliner.
NOTE: Make a note of the position of the rear
window washer tube to make sure that it is installed
in exactly the same position as when removed.
1. Using a suitable knife, remove the rear
window washer tube from the headliner.
Installation Details
Item 38
Rear window washer tube
CAUTION: The rear window washer tube
must be installed in the same position as
when removed.
1. Using a suitable adhesive, bond the rear
window washer tube to the headliner.
Item 35
Roof wiring harness
CAUTION: The roof wiring harness must
be installed in the same position as when
removed.
1. Using a suitable adhesive, bond the roof
wiring harness to the headliner.
Item 31
Headliner trim panel
1. With the aid of another technician, install the
headliner.
Item 21
B-pillar trim panels
NOTE: Make sure the B-pillar safety belt height
adjustment lever is aligned with the safety belt
height adjustment mechanism.
E51422
G410776en
501-05-
78
Interior Trim and Ornamentation
501-05-
78
REMOVAL AND INSTALLATION
Item 17
Rear quarter window glass trim panel
retaining clips
1. Install the rear quarter window glass trim
panel retaining clips to the rear quarter
window glass trim panel.
Item 13
Roof wiring harness
1. Using the
draw cord, feed
the roof wiring
harness
through the NVH material.
Item 11
Noise, vibration and harshness (NVH)
material
1. Reposition the NVH material.
G410776en
501-05-
79
Interior Trim and Ornamentation
501-05-
79
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст