Ford Windstar (2003 year). Manual — part 22

Memory seats/rearview mirrors/adjustable pedals (if equipped)

This system allows automatic
positioning of the driver seat,
outside rearview mirrors, and
adjustable pedals to two
programmable positions.

The memory seat control is located
on the instrument panel to the right
of the steering wheel.
• To program position one, move

the driver seat to the desired
position using the seat controls. Press the SET control. The SET
control indicator light will briefly illuminate. While the light is
illuminated, press control 1.

• To program position two, repeat the previous procedure using control

2.

A position can only be recalled when the transmission gearshift is in
Park. A memory seat position may be programmed at any time.

The memory seat positions are also recalled when you press your remote
entry transmitter UNLOCK control.

To program the memory seat to remote entry transmitter, refer to
Remote entry system in the Locks and security chapter.

REAR SEATS

Head restraints

Lift the head restraint so that it is located directly or as close as possible
behind your head.

The head restraints can be moved
up and down.

SET

1

2

Seating and Safety Restraints

90

Push control to lower head restraint.

Seat mounted cup holders (if equipped)

Your vehicle may be equipped with cupholders mounted on the outboard
sides of the second row seat(s). The cupholder is designed to detach
from the seat when subjected to a heavy load. The cupholder can be
reinstalled by lining up the arms with the side shield holes and pushing
toward the seat.

Seating and Safety Restraints

91

Adjusting rear seats

Lift control to move seat forward or backward.
• 2nd row bucket seat

• 2nd / 3rd row bench seat or 2nd

row bucket console seat

Pull control up to adjust seatback
position.

Seating and Safety Restraints

92

Pull control up to flip seatback to
forward flat position.

Seating and Safety Restraints

93