Ford Windstar (2003 year). Manual — part 54
• Four tire rotation
Reset low tire warning system after rotating tires.
Replacing the tires
Replace the tires when the wear
band is visible through the tire
treads.
Reset low tire warning system after replacing tires.
When replacing full size tires, never mix radial bias-belted, or
bias-type tires. Use only the tire sizes that are listed on the
Certification Label. Make sure that all tires are the same size, speed
rating, and load-carrying capacity. If one tire needs to be replaced
sooner than the other on the same axle replace it with the same brand,
type, size, speed rating, load carrying capacity and DOT code as the
other tire. Note: tires on the same axle (front or rear) must match for
the low tire warning system to function properly. Use only the tire
combinations recommended on the label. If you do not follow these
precautions, your vehicle may not drive properly and safely.
Maintenance and Specifications
218
Make sure that all replacement tires are of the same size, type,
load-carrying capacity and tread design (e.g., “All Terrain”,
“Touring”, etc.), as originally offered by Ford.
Do not replace your tires with “high performance” tires or larger
size tires.
Improperly inflated tires can affect vehicle handling and can fail
suddenly, possibly resulting in loss of vehicle control, vehicle
rollover and/or personal injury.
Tires that are larger or smaller than your vehicle’s original tires may also
affect the accuracy of your speedometer.
SNOW TIRES AND CHAINS
Driving too fast for conditions creates the possibility of loss of
vehicle control. Driving at very high speeds for extended periods
of time may result in damage to vehicle components.
Snow tires must be the same size and grade as the tires you
currently have on your vehicle.
The tires on your vehicle have all weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains. If you need to use chains, it is recommended that steel
wheels (of the same size and specifications) be used as chains may chip
aluminum wheels.
Follow these guidelines when using snow tires and chains:
• Do not use tire chains with 235/60R16 and P235/55R17 size tires.
• Use only SAE Class S chains.
• Install chains securely, verifying that the chains do not touch any
wiring, brake lines or fuel lines.
• Drive cautiously. If you hear the chains rub or bang against your
vehicle, stop and re-tighten the chains. If this does not work, remove
the chains to prevent damage to your vehicle.
• If possible, avoid fully loading your vehicle.
Maintenance and Specifications
219
• Remove the tire chains when they are no longer needed. Do not use
tire chains on dry roads.
• The suspension insulation and bumpers will help prevent vehicle
damage. Do not remove these components from your vehicle when
using snow tires and chains.
MOTORCRAFT PART NUMBERS
Component
3.8L OHV V6 engine
Air filter element
FA-1616
Fuel filter
FG-986B
Battery (standard)
BXT-65-650
Battery (optional)
BXT-65-750
Oil filter
FL-400S
PCV valve
EV-152
Spark plugs*
AWSF-42EE***
* Refer to Vehicle Emissions Control Information (VECI) decal for spark
plug gap information.
*** If a spark plug is removed for inspection, it must be reinstalled in the
same cylinder. Cylinders No. 1, 2, and 3 have a “EG” suffix. Cylinders No.
4, 5, and 6 have a “E” suffix. If a spark plug needs to be replaced, use
only spark plugs with the service part number suffix letter “EE” as
shown on the engine decal.
REFILL CAPACITIES
Fluid
Ford Part
Name
Application
Capacity
Brake fluid
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
1
All
Fill to MAX line
on reservoir
Engine oil
(includes filter
change)
Motorcraft SAE
5W-20 Premium
Synthetic Blend
Motor Oil
3.8L engine
4.7L (5.0
quarts)
Maintenance and Specifications
220
Fluid
Ford Part
Name
Application
Capacity
Engine coolant
2
Motorcraft
Premium Engine
Coolant
(green-colored)
or
Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)
Without rear
heater
14.0L (14.8
quarts)
With rear heater 15.0L (15.9
quarts)
Power steering
fluid
Motorcraft
MERCON
威 ATF
All
Fill to line on
reservoir
Fuel tank
N/A
All
98.4L (26.0
gallons)
Automatic
transaxle fluid
Motorcraft
MERCON
威V
ATF
All
13.0L (13.7
quarts)
Windshield
washer fluid
Ultra-Clear
Windshield
Washer
Concentrate
All
Fill to line on
reservoir
1
Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2
Add the coolant type originally equipped in your vehicle.
Maintenance and Specifications
221
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст