Ford Galaxy / Ford S-MAX. Manual — part 872
B1163-11
Circuit of left-hand heated
exterior mirror faulty (short to
ground).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1163-15
Circuit of left-hand heated
exterior mirror faulty (short to
voltage or open circuit).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1164-11
Circuit of right-hand heated
exterior mirror faulty (short to
ground).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1164-15
Circuit of right-hand heated
exterior mirror faulty (short to
voltage or open circuit).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1165-15
Circuit of courtesy lamps
integrated in the left-hand
exterior mirror faulty (short to
voltage or open circuit).
REFER to:
Parking, Rear and License Plate
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1165-11
Circuit of courtesy lamps
integrated in the left-hand
exterior mirror faulty (short to
ground).
REFER to:
Parking, Rear and License Plate
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1166-15
Circuit of courtesy lamps
integrated in the right-hand
exterior mirror faulty (short to
voltage or open circuit).
REFER to:
Parking, Rear and License Plate
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1166-11
Circuit of courtesy lamps
integrated in the right-hand
exterior mirror faulty (short to
ground).
REFER to:
Parking, Rear and License Plate
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B109C-15
Circuit of interior lighting
activation switch faulty (short to
ground or open circuit).
REFER to:
Interior Lighting
(417-02 Interior
Lighting, Diagnosis and Testing).
B109C-11
Circuit of interior lighting
activation switch faulty (short to
ground).
REFER to:
Interior Lighting
(417-02 Interior
Lighting, Diagnosis and Testing).
B1161-15
Circuit of rear left-hand side
window anti-trap protection
switch faulty (short to voltage or
open circuit).
REFER to:
Glass, Frames and Mechanisms
(501-11 Glass, Frames and Mechanisms,
Diagnosis and Testing).
B1161-23
Circuit of rear left-hand side
window anti-trap protection
switch faulty (signal error).
REFER to:
Glass, Frames and Mechanisms
(501-11 Glass, Frames and Mechanisms,
Diagnosis and Testing).
B1162-15
Circuit of rear right-hand side
window anti-trap protection
switch faulty (short to voltage or
open circuit).
REFER to:
Glass, Frames and Mechanisms
(501-11 Glass, Frames and Mechanisms,
Diagnosis and Testing).
B1162-23
Circuit of rear right-hand side
window anti-trap protection
switch faulty (signal error).
REFER to:
Glass, Frames and Mechanisms
(501-11 Glass, Frames and Mechanisms,
Diagnosis and Testing).
B1D06-15
Circuit of turn signal lamp
integrated in the left-hand
exterior mirror faulty (short to
voltage or open circuit).
REFER to:
Turn Signal, Cornering and Hazard
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1D06-11
Circuit of turn signal lamp
integrated in the left-hand
exterior mirror faulty (short to
ground).
REFER to:
Turn Signal, Cornering and Hazard
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1D07-15
Circuit of turn signal lamp
integrated in the right-hand
exterior mirror faulty (short to
REFER to:
Turn Signal, Cornering and Hazard
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
Symptom Chart
Pinpoint Tests
voltage or open circuit).
B1D07-11
Circuit of turn signal lamp
integrated in the right-hand
exterior mirror faulty (short to
ground).
REFER to:
Turn Signal, Cornering and Hazard
Lamps
(417-01 Exterior Lighting, Diagnosis
and Testing).
B1A94-11
Circuit of driver side exterior
mirror faulty (short to ground).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1A94-15
Circuit of driver side exterior
mirror faulty (short to voltage or
open circuit).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1A95-15
Circuit of passenger side exterior
mirror faulty (short to voltage or
open circuit).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
B1A95-11
Circuit of passenger side exterior
mirror faulty (short to ground).
REFER to:
Rear View Mirrors
(501-09 Rear
View Mirrors, Diagnosis and Testing).
U3003-62
Voltage supply (terminal 30)
faulty.
GO to Pinpoint Test
A.
B1A98-86,
B1A98-83,
B1A98-87,
B1B70-86,
B1B70-83,
B1B70-87
No communications possible via
the LIN bus.
REFER to:
Communications Network
(418-00
Module Communications Network, Diagnosis
and Testing).
U0010-00
No communications possible via
the MS CAN bus.
REFER to:
Communications Network
(418-00
Module Communications Network, Diagnosis
and Testing).
Symptom
Possible
Sources
Action
Driver door module not
communicating with the Ford
diagnostic equipment.
Fuse(s).
Circuit(s).
Driver's door
module.
*
*
*
REFER to:
Communications Network
(418-00 Module Communications
Network, Diagnosis and Testing).
*
Passenger door module not
communicating with the Ford
diagnostic equipment.
Fuse(s).
Circuit(s).
Passenger
door module.
*
*
*
REFER to:
Communications Network
(418-00 Module Communications
Network, Diagnosis and Testing).
*
Voltage supply (terminal 30) at
the driver door module faulty.
Fuse(s).
Circuit(s).
Driver door
module.
*
*
*
GO to Pinpoint Test
A.
*
Voltage supply (terminal 30) at
the passenger door module
faulty.
Fuse(s).
Circuit(s).
Passenger
door module.
*
*
*
GO to Pinpoint Test
B.
*
PINPOINT TEST A : VOLTAGE SUPPLY (TERMINAL 30) AT THE DRIVER
DOOR MODULE FAULTY.
WARNING: The window anti-trap function will not operate during the window motor
initialization procedure.
NOTE: If the power to a window regulator motor has been disconnected, it is necessary
to initialize that window regulator motor.
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: DETERMINE THE VEHICLE VARIANT.
Determine the vehicle variant.
1
Is the vehicle LHD?
Yes
GO to A2
.
No
GO to A4
.
A2: CHECK FUSE FA1
Ignition switch in position 0.
1
CHECK fuse FA1 (RJB).
2
Is the fuse OK?
Yes
GO to A3
.
No
RENEW fuse FA1 (25 A). CHECK the operation of
the system. If the fuse blows again, LOCATE and
REPAIR the short using the Wiring Diagrams.
A3: CHECK THE VOLTAGE AT FUSE FA1
Connect fuse FA1 (RJB).
1
Measure the voltage between fuse FA1 (25 A) and
ground.
2
Does the meter display battery voltage?
Yes
GO to A6
.
No
REPAIR the voltage supply to fuse FA1 with the aid
of the wiring diagrams. CHECK the operation of the
system.
A4: CHECK FUSE FA2
CHECK fuse FA2 (RJB).
1
Is the fuse OK?
Yes
GO to A5
.
No
RENEW fuse FA2 (25 A). CHECK the operation of
the system. If the fuse blows again, LOCATE and
REPAIR the short using the Wiring Diagrams.
A5: CHECK THE VOLTAGE AT FUSE FA2
Connect fuse FA2 (RJB).
1
Measure the voltage between fuse FA2 (25 A) and
ground.
2
Does the meter display battery voltage?
Yes
GO to A6
.
No
REPAIR the voltage supply to fuse FA2 with the aid
of the wiring diagrams. CHECK the operation of the
system.
A6: CHECK THE VOLTAGE AT THE DRIVER DOOR MODULE
Disconnect driver door module C5PL01-A.
1
Measure the voltage between the driver door
module connector C5PL01-A pin 2, circuit SBR01A
(BK), wiring harness side and ground.
2
Does the meter display battery voltage?
Yes
CHECK the driver door module and RENEW if
necessary. CHECK the operation of the system.
No
LOCATE and RECTIFY the break in the circuit
between the driver door module and fuse FA1
(LHD) or fuse FA2 (RHD) with the aid of the Wiring
Diagrams. CHECK the operation of the system.
PINPOINT TEST B : VOLTAGE SUPPLY (TERMINAL 30) AT THE PASSENGER
DOOR MODULE FAULTY.
WARNING: The window anti-trap function will not operate during the window motor
initialization procedure.
NOTE: If the power to a window regulator motor has been disconnected, it is necessary
to initialize that window regulator motor.
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
B1: DETERMINE THE VEHICLE VARIANT.
Determine the vehicle variant.
1
Is the vehicle LHD?
Yes
GO to B4
.
No
GO to B2
.
B2: CHECK FUSE FA1
Ignition switch in position 0.
1
CHECK fuse FA1 (RJB).
2
Is the fuse OK?
Yes
GO to B3
.
No
RENEW fuse FA1 (25 A). CHECK the operation of
the system. If the fuse blows again, LOCATE and
REPAIR the short using the Wiring Diagrams.
B3: CHECK THE VOLTAGE AT FUSE FA1
Connect fuse FA1 (RJB).
1
Measure the voltage between fuse FA1 (25 A) and
ground.
2
Does the meter display battery voltage?
Yes
GO to B6
.
No
REPAIR the voltage supply to fuse FA1 with the aid
of the wiring diagrams. CHECK the operation of the
system.
B4: CHECK FUSE FA2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст