Ford Galaxy / Ford S-MAX. Manual — part 135
Installation
12.
CAUTION: Only rotate the camshaft clockwise.
13. Install the Special Tool(s):
303-1504
1. Refer to:
Crankshaft Front Seal
(303-01B Engine - 2.0L
EcoBoost SCTi (149kW/203PS) - MI4, Removal and
Installation).
2.
CAUTION: Only rotate the crankshaft
clockwise.
Rotate the crankshaft slowly until the crankshaft stops.
Special Tool(s):
303-748
3.
4.
CAUTION: Make sure that the
component aligns with the installation mark.
Torque:
100 Nm
90°
Stage 1:
Stage 2:
5. Remove the Special Tool(s):
303-748
6. Remove the Special Tool(s):
303-1504
7.
CAUTION: Only rotate the crankshaft
clockwise.
8. Install the Special Tool(s):
303-748
9. Rotate the crankshaft slowly until the crankshaft
stops.
Special Tool(s):
303-748
10.
NOTE: The special tool can only be installed if the
valve timing is correct.
Install the Special Tool(s):
303-1504
11. Remove the Special Tool(s):
303-1504
12.
2. Loosen: 2 turn(s)
13.
1.
NOTE: Only tighten the bolts finger tight at
this stage.
2. Install the Special Tool(s):
303-1521
3.
CAUTION: Make sure that the
component aligns with the installation mark.
4. Torque: 7 Nm
14. Remove the Special Tool(s):
303-1521
15.
1. Remove the Special Tool(s):
303-748
2. Torque: 20 Nm
16. Special Tool(s):
303-499
Torque:
12 Nm
17.
NOTE:
The
gasket is
to be
reused
unless
damaged.
Torque:
Nm
18. Torque:
1 10 Nm
2 24 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст