Ford Galaxy / Ford S-MAX. Manual — part 455
Electronic Engine Controls - 2.0L Duratec-
HE (107kW/145PS) - MI4/2.0L Duratec-
HE Flex Fuel (107kW/145PS) - MI4 -
Powertrain Control Module (PCM)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
Vehicles with PCM security shield
3.5 mm drill bit
Center punch
Ford diagnostic equipment
1.
NOTE: This step is only necessary when
installing a new component.
Download the PCM and throttle body configuration
information into the diagnostic tool, using the
Programmable Modules Installation routine.
General Equipment:
Ford diagnostic equipment
2. Refer to:
Battery Disconnect and Connect
(414-01
Battery, Mounting and Cables, General
Procedures).
3. Left-hand side wheel and tire.
Refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
4.
5.
6. Torque: 3 Nm
Vehicles without PCM security shield
Installation
Vehicles with PCM security shield
7. General
Equipment:
Center
punch
General
Equipment:
3.5 mm
drill bit
8.
9. Torque: 3 Nm
1. To install, reverse the removal procedure.
All vehicles
2. Tighten the shear bolt until the head is sheared
off.
3.
NOTE: This step is only necessary when
installing a new component.
Upload the PCM configuration information into the
PCM, using the Programmable Modules Installation
routine.
General Equipment:
Ford diagnostic equipment
Electronic Engine Controls - 2.0L Duratec-
HE (107kW/145PS) - MI4/2.0L Duratec-
HE Flex Fuel (107kW/145PS) - MI4 -
Brake Pedal Position (BPP) Switch—LHD
FWD
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
CAUTION: Make sure that the brake pedal remains in the rest position.
Installation
CAUTION: Make sure that the brake pedal remains in the rest position.
1.
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст