Ford Galaxy / Ford S-MAX. Manual — part 318
24. Install the Special Tool(s):
303-1277
25.
1.
NOTE: Make sure that a new component is
installed.
2. Torque: 60 Nm
3. Torque: 80 Nm
26.
CAUTION: Make sure that the timing belt is
not folded to produce a loop with a diameter less
than 35 mm.
27.
1.
NOTE: Make sure that a new component is
installed.
2.
NOTE: Make sure that a new component is
installed.
3.
NOTE: Only tighten the bolt finger tight at
this stage.
4.
CAUTION: Take extra care when
handling the crankshaft position (CKP)
sensor ring.
28. Allen key, 6mm
Torque:
25 Nm
29.
NOTE: Only tighten the bolt finger tight at this
stage.
30. Remove the Special Tool(s):
303-1277
31. Remove the Special Tool(s):
303-1270
32.
CAUTION: Only rotate the crankshaft
clockwise.
Rotate the crankshaft 4 revolutions.
33.
CAUTION: Make sure that the crankshaft is
not rotated while the special tool is installed.
Install the Special Tool(s):
303-1270
34.
NOTE: The special tool can only be installed if the
valve timing is correct.
Install the Special Tool(s):
303-1277
35.
36. Remove the Special Tool(s):
303-1277
37. Remove the Special Tool(s):
303-1270
38. Torque: 5 Nm
39. Torque: 8 Nm
40. Install the Special Tool(s):
205-044-01
,
303-254
41. Torque:
70 Nm
82°
Stage 1:
Stage 2:
42. Remove the Special Tool(s):
205-044-01
,
303-254
43. Torque: 5 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст