Ford Galaxy / Ford S-MAX. Manual — part 276
Engine - 2.0L Duratorq-TDCi
(85kW/115PS) - DW/2.0L Duratorq-TDCi
(100kW/136PS) - DW/2.0L Duratorq-
TDCi (103kW/140PS) - DW, Emission
Requirements: Stage IV - Engine
S-MAX/Galaxy 2006.5 (02/2006-)
Installation
Special Tool(s)
General Equipment
303-122
Lifting Bracket, Engine
Hose clamp remover/installer
Hydraulic jib crane
Mounting table set
1. Special Tool(s):
303-122
General Equipment:
Hydraulic jib crane
2. General Equipment:
Mounting table set
3. Torque: 48 Nm
4. Torque: 48 Nm
5. Torque: 48 Nm
6.
7. Loosen: 2 turn(s)
8. Torque: 133 Nm
9.
1.
NOTE: Only tighten the bolts finger
tight at this stage.
2. Torque: 133 Nm
10. Raise the vehicle and remove the Mounting table
set.
General Equipment:
Mounting table set
11. Torque: 80 Nm
12. Torque: 90 Nm
13. Refer to:
Quick Release Coupling
(310-00 Fuel
System - General Information, General
Procedures).
14. Torque: 28 Nm
15. Install the following items:
1. Front Drive Halfshafts
Refer to:
Front Drive Halfshafts
(205-04
Front Drive Halfshafts, Description and
Operation).
2. Front Subframe.
Refer to:
Front Subframe
(502-00 Uni-
Body, Subframe and Mounting System,
Removal and Installation).
3. Catalytic Converter.
Refer to:
Catalytic Converter
(309-00E
Exhaust System - 2.0L Duratorq-TDCi
(85kW/115PS) - DW/2.0L Duratorq-TDCi
(100kW/136PS) - DW/2.0L Duratorq-TDCi
(103kW/140PS) - DW, Emission
Requirements: Stage IV, Removal and
Installation).
16.
17. General Equipment:
Hose clamp
remover/installer
Torque:
10 Nm
18.
19.
20.
21.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст