Ford Galaxy / Ford S-MAX. Manual — part 551
Two alignment pins inserted loose in the transaxle housing facilitate installation of the shift
unit and hold it in position.
CAUTION: Caution: When disassembling, the inserted alignment pins may fall out of
the transaxle housing and into the transaxle when removing the shift unit.
A silicon-like sealing compound is used for the seals.
For the exact procedure, please refer to the current workshop literature.
Manual Transmission/Transaxle - Vehicles
With: 6-Speed Manual Transaxle - M66 -
Transmission Draining and Filling—2.5L
Duratec (162kW/220PS) - VI5
S-MAX/Galaxy 2006.5 (02/2006-)
General Procedures
Materials
Name
Specification
Transmission Oil 75W FE WSS-M2C200-D2 / 7U7J-M2C200-BA
1. Refer to: Gesundheits- und
Sicherheitsvorkehrungen (100-00 Allgemeine
Informationen, Description and Operation).
2.
3. Torque: 35 Nm
4. Fill up with manual transmission fluid to below
the bottom edge of the filler hole.
Material:
Transmission Oil 75W FE (WSS-
M2C200-D2 / 7U7J-M2C200-BA)
Torque:
35 Nm
5.
Manual Transmission/Transaxle - Vehicles
With: 6-Speed Manual Transaxle - M66 -
Halfshaft Seal LH
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
308-208
Remover, Halfshaft Seal
308-789
Installer, Driveshaft Seal
1. Remove the left-hand front axle driveshaft.
Refer to:
Front Halfshaft LH
(205-04 Front Drive
Halfshafts, Removal and Installation).
2. Special Tool(s):
308-208
1. Special Tool(s):
308-789
2. Install the left-hand front axle driveshaft.
Refer to:
Front Halfshaft LH
(205-04 Front Drive
Halfshafts, Removal and Installation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст