Ford Galaxy / Ford S-MAX. Manual — part 924
Installation
5.
1.
NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
Carefully trim the remaining PU adhesive from
the front quarter window glass flange.
General Equipment:
Knife
2.
3.
CAUTION: Make sure that all bonding
surfaces are free of moisture.
NOTE: Touching the adhesive surface will
impair rebonding.
Prepare the front quarter window glass, front
quarter window glass flange and trimmed PU
adhesive in accordance with the instructions
supplied with the PU adhesive kit.
General Equipment:
Hot air gun
Material:
Windshield Adhesive Kit (WSS-M11P57-
A5)
4.
NOTE: Discard the first 100 mm of adhesive
as this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped
by 20 mm.
Apply the PU adhesive in a continuous bead of
between 8 and 10 mm in height to the front
quarter window glass flange along the bond line.
General Equipment:
Direct glazing
removal/replacement equipment
Material:
Windshield Adhesive Kit (WSS-M11P57-
A5)
5.
NOTE: This step requires the aid of another
technician.
Press firmly and evenly into position.
General Equipment:
Direct glazing
removal/replacement equipment
Using tape, secure the front quarter
window glass in the correct position until
the PU adhesive has cured.
6. If the ambient temperature falls below 10°C,
apply warm air (25°C) continuously for 15
minutes.
General Equipment:
Hot air gun
7. Install the A-pillar trim panel.
Refer to: A-Pillar Trim Panel (501-05 Interior
Trim and Ornamentation, Removal and
Installation).
Glass, Frames and Mechanisms - Front
Door Window Glass
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Remove the front door trim panel.
Refer to:
Front Door Trim Panel
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
2.
3. Torque: 7 Nm
4.
5.
2. Remove the front door window glass
towards the outside of the window
opening.
1. To install, reverse the removal procedure.
Glass, Frames and Mechanisms - Rear
Door Window Glass
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
All vehicles
NOTE: Removal steps in this procedure may contain installation details.
Vehicles with power windows
Vehicles with manual windows
1. Remove the rear door trim panel.
Refer to:
Rear Door Trim Panel
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
2.
3. Torque: 7 Nm
4.
5.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст