Ford Galaxy / Ford S-MAX. Manual — part 183
9.
CAUTION: Make sure that new bolts are
installed.
Torque:
5 Nm
15 Nm
45 Nm
90°
90°
Stage 1:
Stage 2:
Stage 3:
Stage 4:
Stage 5:
10.
CAUTION: Make sure that the camshafts
and camshaft bearing caps are installed in
their original locations.
Coat the camshaft bearing caps with oil.
Material:
Hypoid Oil 85W-90 (SQ-M2C9002-AA /
A72SX-19K261-CA)
11. Install the camshafts approximately at valve
overlap position cylinder No. 4.
Torque:
7 Nm
16 Nm
Stage 1:
Stage 2:
12. Install the Special Tool(s):
303-376B
13. Torque: 10 Nm
14. Torque: 10 Nm
15.
NOTE: The camshaft sprocket bolt must not
be tightened at this stage.
NOTE: Make sure that the camshaft sprocket
can rotate on the camshaft.
16.
17.
CAUTION: Use an open-ended wrench to
prevent the component from turning.
Torque:
72 Nm
18.
NOTE: The component must be installed
within 5 minutes of applying the sealant.
Material:
Silicone Sealant LB (WSE-M4G323-A4 /
2U7J-M4G323-AA)
19. Torque:
1-8 10 Nm
9 48 Nm
10-19 10 Nm
20-22 48 Nm
20.
CAUTION: Make sure that a new friction
washer is installed.
21. Special Tool(s):
303-509
22.
23. Install the Special Tool(s):
303-748
24.
CAUTION: Only rotate the crankshaft
clockwise.
Turn the crankshaft until it stops against the
special tool.
25. Discard the bolt.
26.
NOTE: Only tighten the bolt finger tight at
this stage.
M6 x 18 mm bolt.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст