Ford Galaxy / Ford S-MAX. Manual — part 99
Steering Linkage - Steering Linkage
S-MAX/Galaxy 2006.5 (02/2006-)
Diagnosis and Testing
REFER to Section
211-00 Steering System - General Information
.
Steering Linkage - Tie Rod
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
General Equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
204-169
Clamping Tool, Boot Retaining Clamp
211-245
Socket, Steering Gear Tie-Rod
Vise
Vise jaw protectors
1. Refer to:
Steering Gear
(211-02 Power Steering,
Removal and Installation).
2.
NOTE: Make sure that the tie rod end is
installed with the same number of turns as
when removed.
Torque:
90 Nm
3.
NOTE: Note the position of each component
before removal.
4.
5. General Equipment:
Vise
General Equipment:
Vise jaw protectors
Installation
1. Special Tool(s):
211-245
Torque:
110 Nm
2.
NOTE: Make sure that these components are
installed to the noted removal position.
Special Tool(s):
204-169
3. To install, reverse the removal procedure.
Steering Linkage - Tie Rod End
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
211-020
Separator, Ball Joint
1. Remove the front wheel and tire.
Refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
2.
WARNING: Make sure a new tie rod end
nut is installed.
CAUTION: Make sure that the ball joint
ball does not rotate.
1. Torque: 90 Nm
2. Torque: 80 Nm
3. Special Tool(s):
211-020
4.
NOTE: Make sure that the tie rod end is
installed with the same number of turns as
when removed.
1. To install, reverse the removal procedure.
2. Check the toe setting and adjust as necessary.
Refer to:
Front Toe Adjustment
(204-00
Suspension System - General Information,
General Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст