Ford Galaxy / Ford S-MAX. Manual — part 664
Installation
5. Refer to: Clutch Master Cylinder (308-02A,
Removal and Installation).
Refer to: Clutch Master Cylinder (308-02C,
Removal and Installation).
6.
NOTE: This step requires the aid of another
technician.
Special Tool(s):
412-131
7.
1. If equipped.
8.
CAUTION: Make sure that the blower
motor and fan assembly is placed on the
bench with the fan pointing upwards.
Using the special tool, remove the blower motor
from the passenger's side.
1.
NOTE: The component can only be installed
in 1 position.
To install, reverse the removal procedure.
Climate Control - Blower Motor Switch—
Vehicles With: Manual Temperature
Control
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
Installation
1. Remove the heater/air conditioning control unit.
Refer to:
Climate Control Assembly - Vehicles
With: Manual Temperature Control
(412-01
Climate Control, Removal and Installation).
2.
1.
2. To install, reverse the removal procedure.
Climate Control - Blower Motor Resistor—
Vehicles With: Manual Temperature
Control
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
LHD Vehicles
Right-hand drive vehicles
1. Torque: 9 Nm
2.
3.
4.
All vehicles
Installation
5.
6.
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст