Ford Galaxy / Ford S-MAX. Manual — part 127
13. Torque: 10 Nm
14.
NOTE: Only tighten the bolts finger tight at
this stage.
15.
16.
CAUTION: Use an open-ended wrench to
hold the camshafts by the hexagon to
prevent the camshafts from turning.
Torque:
72 Nm
17.
Apply a 3 mm bead of sealant to the
engine front cover.
Material:
Silicone Sealant LB (WSE-
M4G323-A4 / 2U7J-M4G323-AA)
18. Torque:
1-8 10 Nm
9 48 Nm
10-19 10 Nm
20-22 48 Nm
19.
CAUTION: Make sure that a new friction
washer is installed.
NOTE: Make sure that a new friction washer
is installed.
20. Special Tool(s):
303-509
21.
22. Install the special tool.
Special Tool(s):
303-748
23.
CAUTION: Only rotate the crankshaft
clockwise.
Rotate the crankshaft until it contacts the special
tool.
24.
Discard the crankshaft pulley retaining
bolt.
25.
NOTE: Only tighten the bolt finger tight at
this stage.
Bolt M6 x 18 mm
26.
CAUTION: Make sure that a new
crankshaft pulley bolt is installed.
Special Tool(s):
205-072
,
205-072-02
Torque:
100 Nm
90°
Stage 1:
Stage 2:
27.
28. Remove the special tool.
Special Tool(s):
303-748
29. Torque: 20 Nm
30. Remove the special tool.
Special Tool(s):
303-376B
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст